qetharp - Query and modify ARP data

7.1 LPAR mode z/VM guest

Use the qetharp command to query and purge address data such as MAC and IP addresses from the ARP cache of the OSA and HiperSockets™ hardware.

Before you begin:

The qetharp command applies only to devices in layer 3 mode.
The qetharp command supports IPv6 only for real HiperSockets and z/VM® guest LAN HiperSockets.
For HiperSockets, z/VM guest LAN and VSWITCH interfaces, the qetharp command supports only the --query option.

qetharp syntax

Where:

-q or --query

shows the address resolution protocol (ARP) information about the specified network interface. Depending on the device that the interface was assigned to, this information is obtained from an OSA feature's ARP cache or a HiperSockets ARP cache.

The default command output shows symbolic host names and includes only numerical addresses for host names that cannot be resolved. Use the -n option to show numerical addresses instead of host names.

By default, qetharp omits IPv6 related information. Use the -6 option to include IPv6 information for HiperSockets.

-n or --numeric

shows numerical addresses instead of trying to resolve the addresses to the symbolic host names. This option can be used only with the -q option.

-c or --compact

limits the output to numerical addresses only. This option can be used only with the -q option.

-6 or --ipv6

includes IPv6 information for HiperSockets. For real HiperSockets, shows the IPv6 addresses. For guest LAN HiperSockets, shows the IPv6 to MAC address mappings. This option can be used only with the -q option.

<interface>

specifies the qeth interface to which the command applies.

-a or --add

adds a static ARP entry to the OSA adapter. Static entries can be deleted with -d.

-d or --delete

deletes a static ARP entry from the OSA adapter. Static entries are created with -a.

-p or --purge

flushes the ARP cache of the OSA. The cache contains dynamic ARP entries, which the OSA adapter creates through ARP queries. After flushing the cache, the OSA adapter creates new dynamic entries. This option works only with OSA devices. qetharp returns immediately.

-i <ip_address> or --ip <ip_address>

specifies the IP address to be added to or removed from the OSA adapter.

-m <mac_address> or --mac <mac_address>

specifies the MAC address to be added to the OSA adapter.

-v or --version

displays version information and exits.

-h or --help

displays usage information and exits. To view the man page, enter man qetharp.

Examples

Show all ARP entries of the OSA defined as eth0:
```
# qetharp -q eth0
```
Show all ARP entries of the HiperSockets interface that is defined as hsi0 including IPv6 entries:
```
# qetharp -6q hsi0
```
Show all ARP entries of the OSA defined as eth0 without resolving host names:
```
# qetharp -nq eth0
```
Show all ARP entries, including IPv6 entries, of the HiperSockets interface that is defined as hsi0 without resolving host names:
```
# qetharp -n6q hsi0
```
Flush the OSA ARP cache for eth0:
```
# qetharp -p eth0
```
Add a static entry for eth0 and IP address 1.2.3.4 to the OSA ARP cache, with MAC address aa:bb:cc:dd:ee:ff:
```
# qetharp -a eth0 -i 1.2.3.4 -m aa:bb:cc:dd:ee:ff
```
Delete the static entry for eth0 and IP address 1.2.3.4 from the OSA ARP cache.
```
# qetharp -d eth0 -i 1.2.3.4
```