Quick Start Guide
This guide helps you install Ubuntu on a Linux on Power Systems server.
Overview
Use this information to install Ubuntu on a non-virtualized or bare metal IBM Power System LC server. This procedure follows these general steps:
- Download the Ubuntu ISO file
- Connect to the BMC firmware to set up network connection
- Connect to the BMC firmware with IPMI
- Access the BMC Advanced System Management interface
- Create virtual media from the ISO file
- Use the virtual media to install Ubuntu
Download your ISO files from the Ubuntu release website. Look for the PowerPC64 Little-Endian server install image. Supported Ubuntu releases include:
-
Ubuntu 18.04: http://cdimage.ubuntu.com/releases/18.04/release/
-
Ubuntu 16.04: http://cdimage.ubuntu.com/releases/16.04/release/
-
Ubuntu 14.04: http://cdimage.ubuntu.com/releases/14.04/release/
For a list of supported distributions, see Supported Linux distributions and virtualization options for POWER8 and POWER9 Linux on Power systems.
Completing the prerequisites and booting your firmware
Before you power on the system, ensure that you have the following items:
- Ethernet cable
- VGA monitor. The VGA resolution must be set to 1024x768-60Hz.
- USB Keyboard
- Power cords and outlet for your system.
- PC or notebook that has IPMItool level 1.8.15 or greater. Find instructions to determine your level of IPMItool and how to update at the end of the guide.
Complete these steps:
- If your system belongs in a rack, install your system into that rack. For instructions, see IBM® Power Systems™ information at https://www.ibm.com/support/knowledgecenter/.
- Connect an Ethernet cable to the embedded Ethernet port next to the serial port on the back of your system. Connect the other end to your network.
- Connect your VGA monitor to the VGA port on back of system.
- Connect your USB keyboard to an available USB port
- Connect the power cords to the system and plug them into the outlets.
At this point, your firmware is booting. Wait for the green LED on the power button to start flashing, indicating that it is ready to use. If your system does not have a green LED indicator light, then wait 1 to 2 minutes.
Notices
© Copyright IBM Corp. 2015, 2019. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
IBM, the IBM logo,
and ibm.com® are trademarks or registered
trademarks of International Bfusiness Machines Corp., registered in many
jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the web at
Copyright and trademark information
(www.ibm.com/legal/copytrade.shtml).