DFS1269E SEVERE IMS INTERNAL FAILURE, REASON CODE=xxyy
Explanation
IMS experienced an internal error. See the following table for a list of reason codes xxyy.
In the message text:
- xx
- A decimal number that identifies the module that experienced the error.
- yy
- An internal reason code.
If yy is 98 or 99, the error can occur in any module. For example:
REASON CODE=4698
occurs in module DFSYRST0, andREASON CODE=2898
occurs in module DFSYGRX0.
xx | yy | Module | Description |
---|---|---|---|
xx | 98 | DFSPOOL | Failure to acquire storage for a variable with the DFSYMAGT macro. |
xx | 99 | DFSPOOL | Failure to release storage for a variable with the DFSYMARL macro. |
16 | 01 | DFSYSCP0 | Release_Prefix_and_Syn_Blocks - Error releasing the prefix buffer. |
16 | 02 | DFSYSCP0 | Release_Prefix_and_Syn_Blocks - Error releasing LUMP storage. |
16 | 03 | DFSYSCP0 | Rel_Sync_AWE_Stg - Error releasing Sync AWE storage. |
16 | 04 | DFSYSCP0 | Delete_Sync_AWE_from_YQAB - No Sync AWE in chain. |
16 | 05 | DFSYSCP0 | Delete_Sync_AWE_from_YQAB - Error deleting AWE from the callout chain. |
16 | 06 | DFSYSCP0 | Process_Request_Data - Error releasing LUMP storage. |
19 | DFSYLUS0 | OTMA FAST SERVICES | |
20 | DFSYSTO0 | OTMA STORAGE MGR | |
21 | DFSYRR00 | OTMA DEST RE-ROUTE SETUP ROUTINE | |
22 | DFSYIO00 | OTMA INPUT/OUTPUT SETUP ROUTINE | |
23 | DFSYCM20 | OTMA COMMAND PROCESSOR | |
24 | DFSYDP40 | OTMA /DIS TRAN or QUERY TRAN | |
25 | DFSYCLH0 | OTMA /TRA SERVICES | |
26 | DFSYRAC0 | OTMA SECURITY | |
27 | DFSYMGX0 | OTMA XCF MESSAGE EXIT | |
28 | DFSYGRX0 | OTMA XCF GROUP EXIT | |
29 | DFSYXMO0 | OTMA ATTACH MEMBER OIM TCB | |
30 | DFSYC480 | OTMA STA/STO(JOIN/LEAVE) XFACE | |
31 | 01 | DFSYFND0 | FIND_LEGACY - Unknown return code from DFSFNDST |
31 | 02 | DFSYFND0 | GET_PRPRIX - DFSPOOL unable obtained a buffer from a specified IMS/VS storage pool. |
31 | 03 | DFSYFND0 | PROCESS_YPRX - OTMAYPRX, An user exit routine has not yet been defined, or unable to get an interface block from BCB. |
31 | 04 | DFSYFND0 | PROCESS_YDRU - DFSYDRUX, An user exit routine has not yet been defined, or unable to get an interface block from BCB. |
31 | 05 | DFSYFND0 | BUILD_OUPUT - User prefix length in error. |
32 | 01 | DFSYFD00 | Bad input PARM - YDSTTY. |
32 | 02 | DFSYFD00 | Bad input PARM for TPIPE - YDSTFUNC. |
32 | 03 | DFSYFD00 | Bad input PARM for YQAB - YDSTFUNC. |
32 | 04 | DFSYFD00 | BAD INPUT PARM for TTIB - YDSTFUNC. |
32 | 05 | DFSYFD00 | BUILD_TPIPE - DFSBCB GET failed. |
32 | 06 | DFSYFD00 | BUILD_TPIPE - TPIPE DFSCIR ITASK failed. |
32 | 07 | DFSYFD00 | DELETE_TPIPE - TPIPE DFSCIR DTASK failed. |
32 | 08 | DFSYFD00 | DELETE_TPIPE - DFSBCB RELEASE failed. |
32 | 09 | DFSYFD00 | RELEASE_YTIB - YTIB was not found. |
32 | 10 | DFSYFD00 | Bad input parameter for RTIB - YDSTFUNC. |
32 | 11 | DFSYFD00 | FIND_YTIB - YRTIB create failed. |
32 | 12 | DFSYFD00 | FIND_YTIB - YTIB get storage pool failed. |
32 | 13 | DFSYFD00 | DELETE_TPIPE - DFSBCB REL TPIPE's query anchor block (QAB) failed. |
32 | 14 | DFSYFD00 | Release_Msceb - Release of user prefix failed. |
32 | 15 | DFSYFD00 | Release_Msceb - Release of user prefix failed. |
32 | 16 | DFSYFD00 | Release_Msceb - Release of MSCEB failed. |
32 | 17 | DFSYFD00 | Delete_Tpipe - Release of QAB hold queue ITASK failed. |
32 | 18 | DFSYFD00 | Delete_Tpipe - Release of hold queue QAB storage failed. |
32 | 19 | DFSYFD00 | Delete_Tpipe - Release of QAB ITASK failed. |
32 | 20 | DFSYFD00 | Find_Tpipe - Release of hold queue failed. |
32 | 21 | DFSYFD00 | Find_Tpipe - Release of ITASK failed. |
32 | 22 | DFSYFD00 | Move_Ytib_Chain - Release of YTIB storage failed. |
32 | 23 | DFSYFD00 | Move_Ytib_Chain - Deletion of YTIB ITASK failed. |
32 | 25 | DFSYFD00 | BUILD_YQAB - The YQAB create failed. |
32 | 26 | DFSYFD00 | Failed to obtain DYNP storage for DFSYPSI0. |
32 | 27 | DFSYFD00 | Failed to release DYNP storage for DFSYPSI0. |
33 | DFSYFD10 | OTMA CONTROL BLOCK PROCESSOR | |
34 | 23 | DFSYMOM0 | NOTIFY_ONE_MEMBER - DFSBCB get failed. |
34 | 24 | DFSYMOM0 | PROCESS_AWES - Invalid AWOFUNC function requested. |
34 | 25 | DFSYMOM0 | CHECK_SECURITY - Invalid security. |
34 | 26 | DFSYMOM0 | CHECK_SECURITY - RACHECK system failed. |
34 | 27 | DFSYMOM0 | CHECK_SECURITY - RACINIT failed. |
34 | 30 | DFSYMOM0 | Do_oic_notify - Error on Get Unique notify. |
34 | 31 | DFSYMOM0 | Do_oic_notify - Error on FINDDEST notify. |
34 | 32 | DFSYMOM0 | The load failed for the DRU exit. |
35 | 03 | DFSYMEM0 | Check_Security - Resume Tpipe RACINIT failed. |
35 | 04 | DFSYMEM0 | Check_Security - Resume Tpipe is not authorized. |
35 | 24 | DFSYMEM0 | DO_MEM_PHASE3 - OTMA is not ready shutdown in phase 3. |
35 | 25 | DFSYMEM0 | ARE_QAB_READY - All QABs are not ready for shutdown. |
35 | 26 | DFSYMEM0 | ARE_TIBS READY - All TIBs are not ready for shutdown. |
35 | 27 | DFSYMEM0 | PERFORM_ON_TIB - Unable to post the TIB. |
35 | 28 | DFSYMEM0 | PERFORM_ON_QAB - Unable to post the query anchor block (QAB). |
35 | 29 | DFSYMEM0 | PROCESS_AWES - Invalid AWOFUNC function requested. |
35 | 30 | DFSYMEM0 | FREE_AWE - Unsupported AWE type. |
35 | 31 | DFSYMEM0 | Activate_Resume_Tpipe - System was unable to post the query anchor block (QAB). |
35 | 32 | DFSYMEM0 | DO_MEM_RSM_TPIPE - System was unable to post the QAB for the super member. |
35 | 33 | DFSYMEM0 | OTMA failed to create or find a tpipe for the RESUME TPIPE
call. This problem can be caused by:
|
35 | 34 | DFSYMEM0 | RelStgBuf - OTMA failed to release the storage of the response message for the DL/I ICAL call. |
35 | 35 | DFSYMEM0 | DO_MEM_RSM_TPIPE - Invalid communication line block (CLB) pointer. |
35 | 36 | DFSYMEM0 | DO_MEM_RSM_MHQUE - Invalid communication line block (CLB) pointer. |
35 | 41 | DFSYMEM0 | Are_TIBs_Ready - Unable to post the transaction instance block (TIB). |
35 | 42 | DFSYMEM0 | DO_MEM_RSM_TPIPE - Unable to post the query anchor block (QAB). |
35 | 43 | DFSYMEM0 | Are_TIBs_Ready - Unable to post the QAB. |
35 | 44 | DFSYMEM0 | Do_mem_rep_resync - Unable to post the QAB. |
35 | 45 | DFSYMEM0 | Do_mem_rep_resync - Unable to post the QAB. |
35 | 46 | DFSYMEM0 | DO_MEM_RSM_TPIPE - Unable to post the QAB. |
35 | 47 | DFSYMEM0 | Queue_Resume_Tpipe - Unable to post the QAB. |
35 | 48 | DFSYMEM0 | Do_Mem_Del_Resume_Tp - Unable to post the QAB. |
35 | 49 | DFSYMEM0 | OTMA failed to initialize the hold queue of a super member TPIPE for the RESUME TPIPE call. |
36 | DFSYIMI0 | OTMA GETTING STORAGE FOR NEW MBR. | |
37 | 28 | DFSYPSI0 | PROCESS_AWE - Unsupported AWE function type. |
37 | 29 | DFSYPSI0 | FREE_AWE - Unsupported AWE type. |
37 | 30 | DFSYPSI0 | No State Data. |
38 | DFSYPSOO | TPIPE OUTPUT AWE SERV DFSYPSOO | |
39 | DFSYSND0 | OTMA XCF INTERFACE | |
40 | 01 | DFSYTIB0 | Normal_Cleanup - Release TIB failed. |
40 | 02 | DFSYTIB0 | Find_Dest: Unable to find the TranCode destination. |
40 | 03 | DFSYTIB0 | Check_Security - RACINIT failed. |
40 | 04 | DFSYTIB0 | Check_Security - RACHECK verified TranCode/Command Verb failed. |
40 | 05 | DFSYTIB0 | Reserved. |
40 | 06 | DFSYTIB0 | Enqueue - Message Router DFSICLR0 enqueued the message to the destination, but failed. |
40 | 07 | DFSYTIB0 | Process_Input - Get buffer pool failed. |
40 | 08 | DFSYTIB0 | Normal_Cleanup - Unable to free the receive buffer or command buffer it had been allocated. |
40 | 09 | DFSYTIB0 | Process_Input - DFSQMGR updated the Message Prefix to show that message is unrecoverable and non-restartable, but failed. |
40 | 10 | DFSYTIB0 | Reserved. |
40 | 11 | DFSYTIB0 | Inser_One_Seqgment - QMGR inserted the segment, but failed. |
40 | 12 | DFSYTIB0 | Process_cmd: DFSYCMD0 command in error. |
40 | 13 | DFSYTIB0 | Reserved. |
40 | 14 | DFSYTIB0 | Handle_Error - Canceled pending QMGR, but failed. |
40 | 15 | DFSYTIB0 | Reserved. |
40 | 16 | DFSYTIB0 | Reserved. |
40 | 17 | DFSYTIB0 | Process_FastPath - Fast Path transaction in error. |
40 | 18 | DFSYTIB0 | Reserved. |
40 | 19 | DFSYTIB0 | Conv_Tran - Not a conversational transaction. |
40 | 20 | DFSYTIB0 | Update_Msg_Prefix - Internal error in DFSQMGR for Non_Fastpath transaction. |
40 | 21 | DFSYTIB0 | Update_Msg_Prefix - Response Mod error in DFSQMGR for Non_Fastpath transaction. |
40 | 22 | DFSYTIB0 | Free_Awe - Unsupported AWE type |
40 | 23 | DFSYTIB0 | Find_Dest - Command invalid from an OTMA client. See DFS1285E. |
40 | 24 | DFSYTIB0 | Find_Dest - Tran currently not available for use. See DFS3470. |
40 | 25 | DFSYTIB0 | Find_Dest - SMB Tran/Lterm is stopped. See DFS065. |
40 | 26 | DFSYTIB0 | Find_Dest - Invalid Transaction which is CPIC. See DFS1286E. |
40 | 27 | DFSYTIB0 | Find_Dest - Remote Destination (RCNT) invalid. See DFS1287E. |
40 | 28 | DFSYTIB0 | Find_Dest - Invalid CNT name is specified. See DFS1288E. |
40 | 29 | DFSYTIB0 | Find_Dest - The SMB is not found. See DFS064. |
40 | 30 | DFSYTIB0 | Check_Security - Invalid security. See DFS1292E. |
40 | 31 | DFSYTIB0 | Conv_TRAN - System Error Requested. |
40 | 32 | DFSYTIB0 | Process_FastPath - System Error Message. |
40 | 33 | DFSYTIB0 | Process_FastPath - User Error Message. |
40 | 34 | DFSYTIB0 | Insert_One_Segment - Single Segment Message. See DFS1290E. |
40 | 35 | DFSYTIB0 | Enqueue - All messages discarded. See DFS249. |
40 | 36 | DFSYTIB0 | Insert_One_Segment - Sent null segment. See DFS249. |
40 | 37 | DFSYTIB0 | Insert_One_Segment - Queue overflow as unsuccessful insert. |
40 | 38 | DFSYTIB0 | Find_Dest - Disallow CM0 for IMS conversational or Fast Path Transaction. See DFS1291E. |
40 | 39 | DFSYTIB0 | Process_commit - Ending the conversation without an error message. |
40 | 40 | DFSYTIB0 | Find_Dest - DFSMSCE0 Terminal Routing entry point requested to reroute message to a remote system, but failed. See DFS064. |
40 | 41 | DFSYTIB0 | Find_Dest - DFSMSCE0 Terminal Routing entry point requested to reroute message to a remote system, but failed. See DFS070. |
40 | 42 | DFSYTIB0 | Check_Seq_Num - Validate the recoverable sequence number for Resynch, but failed with Segment number. |
40 | 43 | DFSYTIB0 | Check_Seq_Num - Validate the recoverable sequence number for Resynch, but failed with Nack. |
40 | 48 | DFSYTIB0 | An invalid message was received from DFSYPSI0. |
40 | 51 | DFSYTIB0 | When processing an input message without an AWE control block, an invalid AWE function code was specified. |
40 | 54 | DFSYTIB0 | The attempt to insert a prefix failed for the queue manager. |
40 | 58 | DFSYTIB0 | An invalid APPC/OTMA shared queues prefix data that was sent from the back-end IMS was detected in the front-end IMS. |
40 | 60 | DFSYTIB0 | Go_DFSYIO00 - IMS failed to obtain LUMP storage for calling the OTMAIOED user exit. |
40 | 61 | DFSYTIB0 | Enqueue - IMS failed to release LUMP storage. |
40 | 63 | DFSYTIB0 | Process_Input - Get buffer pool failed. |
40 | 64 | DFSYTIB0 | Process_Output - Error releasing asynchronous work element (AWE) for shared queues. |
40 | 65 | DFSYTIB0 | Msg_Back_Queue - Release of asynchronous work element (AWE) failed. |
40 | 66 | DFSYTIB0 | Msg_Back_Queue - Conversational transaction in error. |
40 | 67 | DFSYTIB0 | Msg_Back_Queue - Conversational transaction in error. |
40 | 68 | DFSYTIB0 | Msg_Back_Queue - Release of asynchronous work element (AWE) failed. |
40 | 69 | DFSYTIB0 | Conv_Tran - Conversational transaction in error. |
40 | 71 | DFSYTIB0 | Conv_Tran - Conversational transaction in error. |
40 | 72 | DFSYTIB0 | Go_DFSYIO00 - IMS failed to obtain LUMP storage for calling the OTMAIOED user exit. |
40 | 74 | DFSYTIB0 | Go_DFSYIO00 - IMS failed to release LUMP storage. |
40 | 75 | DFSYTIB0 | Normal_Cleanup - IMS failed to release LUMP storage. |
40 | 76 | DFSYTIB0 | Setup_Security - IMS failed to obtain LUMP storage for RACF® TOKENMAP. |
40 | 77 | DFSYTIB0 | Setup_Security - IMS failed to release LUMP storage. |
41 | 08 | DFSYQAB0 | Get_First_Segment - DFSQMGR gets segment failure. |
41 | 28 | DFSYQAB0 | Check_System_Status - Member is not clear to send. |
41 | 29 | DFSYQAB0 | Edit_N_Send - Segment has been canceled. |
41 | 30 | DFSYQAB0 | Move_Segment_Into_Buf - The LLZZ of segment length has exceeded the maximum size. |
41 | 50 | DFSYQAB0 | Check_System_Status - System shutdown is in progress. |
41 | 51 | DFSYQAB0 | Check_System_Status - XCF group has not been enabled. |
41 | 52 | DFSYQAB0 | Check_System_Status - Qab/Pipe Control Block has not been stopped. |
41 | 53 | DFSYQAB0 | Check_Init_Before_Send - Unable t0 clear YQAB for work. |
41 | 54 | DFSYQAB0 | Get_First_Segment - DFSQMGR cannot get the first segment. |
41 | 55 | DFSYQAB0 | Reserved. |
41 | 56 | DFSYQAB0 | Get_First_Segment - APPC Transaction has no prefix. |
41 | 57 | DFSYQAB0 | Get_Storage - DFSPOOL allocated storage failure. |
41 | 58 | DFSYQAB0 | Dispose_Msg - Wash the msg back after sending. |
41 | 59 | DFSYQAB0 | Free_Storage - DFSPOOL freed storage using DFSPOOL failure. |
41 | 60 | DFSYQAB0 | Check_System_Status - RESYNC flag is on. |
41 | 61 | DFSYQAB0 | Proc_Sync_Callout_Msg - Sync AWE processing error. |
41 | 62 | DFSYQAB0 | Proc_Sync_Callout_Msg - Sync AWE unknown state. |
41 | 80 | DFSYQAB0 | Reroute_Msg - Unable to find YQAB for message hold queue. |
41 | 81 | DFSYQAB0 | Reroute_Msg - Unable to reroute message. |
41 | 82 | DFSYQAB0 | Reroute_Msg - Bad return code from message router CLR1. |
42 | 04 | DFSYLUS0 | Send_Service - Send out Sync output, but YQAB indicator is on. |
42 | 08 | DFSYLUS0 | Send_Service - DFSYSLM0 issues XCF send, but failed. |
42 | 29 | DFSYLUS0 | Send_Deallocate - DFSYFMTE cannot find corresponding input member. |
42 | 30 | DFSYLUS0 | Do_Invalid_Service - Bad addressability or parameter area. |
42 | 31 | DFSYLUS0 | Chng_Service - DFSYFND0 should return to DFSDLA30, but it is not. |
42 | 32 | DFSYLUS0 | Find_QAB - Cannot find a QAB in the OTMA message prefix. |
42 | 33 | DFSYLUS0 | Find_RTIB - Cannot find an RTIB in the OTMA message prefix. |
42 | 34 | DFSYLUS0 | Find_TIB - Cannot find a TIB in the OTMA message prefix. |
42 | 35 | DFSYLUS0 | GetQabTib_Service - When OTMA returns to CLB, which should have YTIB/YQAB address, but DLAMSGIN is not pointing to the OTMA message prefix. |
42 | 36 | DFSYLUS0 | Copypf_Service - When OTMA copies a OTMA message prefix, DLAMSGIN is pointing to OTMA message prefix, but cannot find the TIB in the LUMBLK. |
42 | 37 | DFSYLUS0 | Copypf_Service - When OTMA copies a OTMA message prefix, DLAMSGIN is pointing to OTMA message prefix, but the LUMBLK_Ptr is zero. |
42 | 38 | DFSYLUS0 | Get_OTMA_Prefix - DFSPOOL cannot get storage for OTM prefix. |
42 | 39 | DFSYLUS0 | TibInfo_Service - When OTMA returns information in the YTIB, the LUMBLK_Ptr is pointing to the YTIB, but the address of LTERM (DLALTRMA) is zero. |
42 | 40 | DFSYLUS0 | Inqy_Service - OTMA is not returned information from OTMA Prefix or YQAB/YTIB. |
42 | 43 | DFSYLUS0 | Sync_Output - Failure to get Sync AWE storage. |
42 | 45 | DFSYLUS0 | Sync_Output - Failure to release Sync AWE storage. |
42 | 48 | DFSYLUS0 | Send_Deal_to_FE - Failure to get Sync AWE storage. |
42 | 49 | DFSYLUS0 | Send_DFS_Msg_To_FE - Failure to get Sync AWE storage. |
42 | 50 | DFSYLUS0 | Send_DFS_Msg_To_FE - Failure to get Sync AWE storage. |
42 | 51 | DFSYLUS0 | Send_DFS_Msg_To_FE - Failure to release Sync AWE storage. |
43 | 06 | DFSYCMD0 | INIT_PRE - Fail to call QMGR insert move message prefix. |
43 | 23 | DFSYCMD0 | INIT_PRE - DFSPOOL gets the LUMP pool, but failed. |
43 | 24 | DFSYCMD0 | INIT_PRE - DFSPOOL releases the LUMP pool, but failed. |
44 | DFSYCKP0 | OTMA CHECK POINT | |
45 | 29 | DFSYSLM0 | Reserved. |
45 | 30 | DFSYSLM0 | Move_Segment_Into_Buf - The LLZZ of segment length is exceeded the maximum size of 32k. |
45 | 57 | DFSYSLM0 | Get_Storage - DFSPOOL get LUMP, but failed. |
45 | 59 | DFSYSLM0 | Free_Storage - DFSPOOL releases LUMP, but failed. |
46 | DFSYRST0 | OTMA RESTART | |
46 | 01 | DFSYRST0 | Restart_4032 - A tpipe create failed for the 4032 log record. Restart continues without these blocks, but messages might be lost. |
46 | 02 | DFSYRST0 | Restart_4032 - HOLDQ create failed for the 4032 log record. Restart continues without these blocks, but messages might be lost. |
46 | 03 | DFSYRST0 | Restart_4032 - A YQAB token mismatch was found for a 4032 log record. Restart continues without these blocks, but messages might be lost. |
46 | 04 | DFSYRST0 | Restart_4032 - A HOLDQ token mismatch was found for a 4032 log record. Restart continues without these blocks, but messages might be lost. |
47 | 01 | DFSYIDC0 | Obtain storage below the Line for BPAM buffer and input block, but the interface STORAGE routine failed. |
47 | 02 | DFSYIDC0 | Get The Receive Buffer (3K), but DFSPOOL GET failed. |
47 | 03 | DFSYIDC0 | Release The Allocated Buffer, DFSPOOL REL failed. |
47 | 04 | DFSYIDC0 | Free the storage it has been allocated, but DFSPOOL REL failed. |
48 | 01 | DFSYQFX0 | Ixctl_To_Yrtib - Create a TIB ITASK by using the created RTIB, but failed. |
48 | 02 | DFSYQFX0 | Ixctl_To_Yrtib - Call DFSDST to create a YRTIB, but failed. |
48 | 03 | DFSYQFX0 | Ixctl_To_Yrtib - After creating RTIB ITASK, IXCTL run under YTIB ITASK, but failed. |
48 | 07 | DFSYQFX0 | Ixctl_From_Yrtib - IXCTL back to the PST, and delete the YRTIB ITASK, but failed with deleting the YRTIB ITASK. |
48 | 82 | DFSYQFX0 | If the OTMA was started, the MTO response is to issue /STOP OTMA, then issue /START OTMA. |
49 | OTMAYPRX | OTMA Destination Resolution user exit | |
50 | DFSYDRU0 | OTMA DEFAULT DRU EXIT DFSYDRU0 | |
51 | DFSYJL00 | OTMA JOIN/LEAVE-DFSYJL00 |
System action
Processing continues.
Programmer response
Contact IBM® Software Support and report the reason code xxyy and the output found in the OTMA trace. For more information, see the IBM diagnostic documentation.