SLU 2 bind parameters
You can use this table to search for the bind parameters for SLU 2 devices.
| Byte | Bit | Content | Description |
|---|---|---|---|
| 0 | X'01' | Format=0; BINDTYPE=COLD | |
| 1 | X'03' | FM Profile 3 | |
| 2 | X'03' | TS Profile 3 | |
| 3 | Primary NAU protocol | ||
| 0 | B'1' | Multiple RU chains | |
| 1 | B'0' | Immediate request | |
| 2-3 | B'11' | Any response | |
| 4-5 | Reserved | ||
| 6 | B'0' | No compression | |
| 7 | B'1' | Primary can send EB | |
| 4 | Secondary NAU protocol | ||
| 0 | B'1' | Multiple RU chains | |
| 1 | B'0' | Immediate request | |
| 2-3 | B'01' | Exception response | |
| 4-5 | Reserved | ||
| 6 | B'0' | No compression | |
| 7 | B'0' | Secondary cannot send EB | |
| 5 | Common NAU protocol | ||
| 0 | Reserved | ||
| 1 | B'0' | Message headers are not allowed | |
| 2 | B'1' | Brackets to be used | |
| 3 | B'1' | Bracket termination rule 1 (conditional) | |
| 4 | B'0' | No alternate code | |
| 5-7 | Reserved | ||
| 6 | Common NAU protocol | ||
| 0-1 | B'10' | FM transmission mode: HDX flip/flop | |
| 2 | B'0' | Primary ERP responsibility | |
| 3 | B'0' | Secondary station is the first speaker | |
| 4-6 | xxx | Reserved | |
| 7 | B'0' | For HDX-FF mode, secondary sends first when leaving data traffic reset state | |
| 7 | SLU Send Pacing count: Not changed by IMS | ||
| 8 | SLU Receive Pacing count: Not changed by IMS | ||
| 9 | SLU MAX RU send size: Set to Max receive any buffer size from IMS system definition | ||
| 10 | PLU MAX RU send size: Set from output buffer size specified at IMS system definition | ||
| 11-12 | Reserved: X'0000' should be specified | ||
| 13 | LU TYPE: Set to X'02' by IMS | ||
| 14-18 | Reserved: X'00' should be specified | ||
| 19-20 | User specified screen size if 3274/3276 device. Otherwise not changed. | ||
| 21-22 | Alternate screen size, X'00' should be specified. | ||
| 23 | Set to X'7E' if 3274/3276 NDS device or X'02' if non-NDS 3270 master terminal. Otherwise should be X'00'. | ||
| 24-25 | User specified: should be X'00' | ||
| 26 | PLU Name length | ||
| 27-34 | PLU name: IMS ACB name | ||
| 35 | User data length: Not supported, X'00' must be specified | ||
| Notes:
|
|||