Location codes for DFSCNXA0 error messages
Message DFS3672I contains the location codes of the DFSCNXA0 error messages and the message also identifies the exit routine in which the error occurred.
Message DFS3672I contains the location codes listed in the following table.
Session failures might occur that do not cause any DFS messages to be issued by DFSCNXA0. In these cases, only message DFS3672 appears.
The
format of the DFS3672I message is as follows:
DFS3672I SESSION ERROR. TYPE=aaa CODE=bb QUAL.=cc MSG=dddd- aaa
- is the VTAM® exit which was driven when the error occurred.
- bb
- is the location code of the error.
- cc
- is the location qualifier of the error.
| Location code (decimal) | Location code (hexadecimal) | Msg# (DFS) | Exit | Explanation |
|---|---|---|---|---|
| 19 | 13 | 3862 | LOG | Non-master terminal initiating a session on the alternate system. |
| 20 | 14 | 3100 | LOG | Node in FP input mode. |
| 21 | 15 | 3645 | LOG | Generic Resource name used but VGR for ISC was disabled. |
| 147 | 93 | 3645 | LOG | Parsing for userdata failed for AUTOSIGN terminal |
| 151 | 97 | 3644 | LOG | Could not get SOPB storage for AUTOSIGN terminal |
| 22 | 16 | 3645 | SCIP | Generic Resource name used but VGR for ISC was disabled. |
| 1 | 1 | N/A | LOST | No CID in VTAM parameter list. |
| 2 | 2 | N/A | LOST | CLB not found. |
| 3 | 3 | N/A | LOST | Stacked logon chaining error. |
| 4 | 4 | N/A | LOST | CLBs do not match (stacked logon situation). |
| 5 | 5 | N/A | LOST | CLBs do not match (nonstacked situation). |
| 1 | 1 | N/A | NSXT | No CLB in USERFLD of NIB (Cleanup RU). |
| 2 | 2 | N/A | NSXT | No CID. |
| 3 | 3 | N/A | NSXT | CLB not found (Cleanup RU). |
| 4 | 4 | N/A | NSXT | CLB addresses do not match. |
| 5 | 5 | N/A | NSXT | IMS APPLID not found in resolve in-doubt vector list. |
| 7 | 7 | N/A | NSXT | Polarity mismatch on MSC link. |
| 8 | 8 | N/A | NSXT | Polarity mismatch on MSC link. |
| 10 | A | N/A | NSXT | Not Cleanup, NSPE, or Notify—RU is invalid. |
| 11 | B | N/A | NSXT | Invalid session key for NSPE. |
| 12 | C | N/A | NSXT | Invalid vector key for NOTIFY. |
| 13 | D | N/A | NSXT | Invalid session key for NOTIFY. |
| 21 | 15 | 2061 | NSXT | NSPE/NOTIFY processed. |
| 22 | 16 | 2061 | NSXT | NSPE/NOTIFY processed, AHDR not cleaned up. |
| 23 | 17 | 2061 | NSXT | CLB not found (NOTIFY RU). |
| 1 | 1 | N/A | RELQ | VTCB not found. |
| 2 | 2 | N/A | RELQ | Terminal defined with NORELRQ option. |
| 3 | 3 | N/A | RELQ | No CID in nonparallel-session VTCB. |
| 4 | 4 | N/A | RELQ | No CID in any parallel-session VTCBs. |
| 1 | 1 | 1915 | SCIP | No pointer to RPL. |
| 2 | 2 | 1917 | SCIP | Node not found. |
| 3 | 3 | 3862 | SCIP | VTCB not found (XRF Alt.). |
| 4 | 4 | 3862 | SCIP | Invalid temporary VTCB (XRF Alt.). |
| 5 | 5 | 3862 | SCIP | BIND not on surveillance link (XRF Alt.). |
| 6 | 6 | 3101 | SCIP | BIND not from same APPLID. |
| 7 | 7 | 3101 | SCIP | BIND rejected after setting VLGFF. |
| 8 | 8 | 2104 | SCIP | Non-LU 6.1 node. |
| 9 | 9 | 3111 | SCIP | Node stopped. |
| 10 | A | 3101 | SCIP | Logoff requested. |
| 11 | B | 3101 | SCIP | SPQB already allocated. Another 3672 (code=2D) is sent, after the -resp is sent. |
| 12 | C | 3101 | SCIP | BIND not from same APPLID. |
| 13 | D | 3101 | SCIP | BIND rejected after setting CLBVLGFF flag. |
| 14 | E | 2104 | SCIP | CLEAR for non-ISC node. |
| 15 | F | 970 | SCIP | UNBIND entry message sent (after posting). |
| 16 | 10 | 1931 | SCIP | ASR processing begins. |
| 17 | 11 | 2104 | SCIP | SDT for non-ISC node. |
| 18 | 12 | 1915 | SCIP | Invalid command in RPL. |
| 22 | 16 | 79 | SCIP | Queues not available. |