FABH messages

Use the information in these messages to help you diagnose and solve IMS High Performance Unload problems.

FABH0001E
INVALID CARD TYPE
FABH0002E
INVALID NUMERIC FIELD
FABH0003E
CARD TYPE NOT FOLLOWED BY VALUE
FABH0004E
PARAMETER IS TOO LONG
FABH0005E
FIRST CARD SHOULD BE A "CABDD" CARD
FABH0011E
RANSIZE IS TOO LOW; MINIMUM IS 2 CABDD=xxxxxxxx
FABH0012E
RANSIZE IS TOO HIGH; MAXIMUM IS 255 CABDD=xxxxxxxx
FABH0013E
NBRSRAN IS TOO LOW; MINIMUM IS 3 CABDD=xxxxxxxx
FABH0015E
NBRDRAN IS TOO LOW; MINIMUM IS 2 CABDD=xxxxxxxx
FABH0016E
NBRDBUF IS TOO LOW; MINIMUM IS 2 CABDD=xxxxxxxx
FABH0017W
DDNAME NOT FOUND CABDD=ddname
FABH0018E
SPECIFY EITHER "YES" OR "NO"
FABH0019E
INVALID OVERFLOW SPECIFICATION
FABH0020E
OPEN OF HSSRCABP HAS FAILED
FABH0021E
NOGO SET BECAUSE OF ERRORS ON CAB CONTROL STATEMENTS
FABH0022E
NBRSRAN IS TOO HIGH; MAXIMUM IS 9999 CABDD=xxxxxxxx
FABH0023E
NBRDBUF IS TOO HIGH; MAXIMUM IS 255 CABDD=xxxxxxxx
FABH0024E
REQUESTED BUFFER TOO LARGE; DDNAME=ddname
FABH0025E
THE SECOND OPERAND OF THE PARTPROC STATEMENT MUST BE EITHER 'S' OR 'R' (DBD: dbdname)
FABH0026E
THE LENGTH OF THE THIRD OPERAND OF THE PARTPROC STATEMENT MUST BE LESS THAN FIVE (DBD: dbdname)
FABH0027W
THE DBD SPECIFIED ON THE PARTPROC STATEMENT IS NOT FOUND OR IS NOT FOR HALDB (DBD: dbdname)
FABH0028E
INCONSISTENT BUFFER HANDLERS ARE SPECIFIED FOR DSGROUP n OF HALDB dbdname
FABH0029E
SYNTAX ERROR IN A PARTPROC STATEMENT: reason
FABH0030E
THE THIRD OPERAND OF A PARTPROC STATEMENT IS NOT A NUMERIC (DBD: dbdname)
FABH0031E
DDNAME=ddname; DATA REQUEST OUTSIDE OF DATA SET LIMITS
FABH0032E
BUFFER HANDLER LOGIC ERROR
FABH0033E
BUFFER HANDLER LOGIC ERROR
FABH0034E
REQUESTED STORAGE FOR DBD=dbdname NOT AVAILABLE WITHIN THE REGION
FABH0035E
UNSUPPORTED LEVEL OF IMS IS BEING USED: xxx IMS LEVEL OF THIS RUN
FABH0036E
THIRD OPERAND FOR PARTPROC STATEMENT IS NOT ALLOWED IF THE SECOND OPERAND IS 'S' (DBD: dbdname)
FABH0037E
INCONSISTENT OVERFLOW BUFFERING OPTIONS FOR PHDAM dbdname
FABH0038E
INCONSISTENT PAGEFIX OPTIONS FOR DATA SETS OF DSGROUP n OF HALDB dbdname
FABH0039I
UNSUPPORTED LEVEL OF IMS IS BEING USED: xxx
FABH0041E
VSAM POINT ERROR DURING SEQUENTIAL ESDS I/O
FABH0042E
VSAM GET ERROR DURING SEQUENTIAL ESDS I/O
FABH0044W
WARNING: NUMBER OF VSAM BUFFERS NOT O.K.
FABH0045E
VSAM LOGICAL ERROR AFTER POINT MACRO
FABH0046E
VSAM PHYSICAL ERROR
FABH0047E
SHOULD NOT OCCUR ERROR AFTER VSAM CHECK MACRO
FABH0048E
SHOULD NOT OCCUR ERROR AFTER VSAM CHECK MACRO
FABH0049E
VSAM MACRO GENCB BLOCK=RPL FAILED
FABH0050E
VSAM MACRO MODCB RPL=... FAILED
FABH0053E
RANSIZE SHOULD BE THE SAME FOR ALL PCB'S REFERENCING THE SAME ESDS
FABH0054E
NUMBER OF VSAM BUFFERS NOT OK., PLHBFRNO=xxx
FABH0055W
SPECIFIED NUMBER OF BUFFERS IN A SEQ_BUF FOR DDNAME=ddname NOT OPTIMAL FOR ESDS
FABH0056W
NUMBER OF BUFFERS IN A SEQ_BUF xxx CHANGE TO yyy
FABH0057W
NUMBER OF VSAM BUFFERS IS OVERRIDDEN: PLHBFRNO=xxx
FABH0060E
DEVTYPE MACRO FAILED ON DDNAME: ddname RC=rc
FABH0061E
OPEN FAILED FOR DDNAME: ddname
FABH0062E
BLDL MACRO FAILED FOR MEMBER mbrname IN LIBRARY ddname (RC=rc,RSN=rsn)
FABH0063E
BSAM CLOSE HAS FAILED
FABH0064E
HDCB NOT FOUND
FABH0065E
DDNAME SPECIFIED IN DBD (dbdname) DOES NOT HAVE A CORRESPONDING MATCH WITH A DD STATEMENT
FABH0066E
INCORRECT DFSMDA MEMBER: xxxxxxxx
FABH0067E
DD: ddname INFORMATION OF DB: dbdname IS NOT FOUND IN DFSMDA MEMBER
FABH0068E
DYNAMIC ALLOCATION FAILURE OCCURRED FOR DB: dbdname DD: ddname RC=xx RSN=yyyy
FABH0070E
UNEXPECTED DEB LAYOUT
FABH0071E
UNEXPECTED DEB LAYOUT
FABH0072E
UNEXPECTED DEB LAYOUT
FABH0073E
UNSUCCESSFUL BSAM OPEN BY CAB BUFFER HANDLER
FABH0074E
INVALID ENTRY INTO BSAM EOV EXIT ROUTINE
FABH0075E
INVALID ENTRY INTO BSAM EODAD ROUTINE
FABH0076E
text
FABH0081I
I/O WILL BE PERFORMED
FABH0082I
BSIM NORMAL END OF PROCESSING
FABH0083E
HSSR ENVIRONMENT IS NOT ESTABLISHED
FABH0084E
SYSUT1 COULD NOT BE OPENED
FABH0085E
INVALID RECORD TYPE IN SYSUT1
FABH0086E
PCB-NBR STORED IN SYSUT1 RECORD DOES NOT EXIST IN PSB
FABH0087E
PCB-NBR STORED IN SYSUT1 RECORD IS NOT THE NUMBER OF A HSSR PCB
FABH0088E
BUFFER HANDLER CALL TYPE STORED IN SYSUT1 RECORD IS INVALID
FABH0089E
NOT NUMERIC FIELD ON SYSIN CARD
FABH0090E
INVALID HSSRPCB OR HSSRDBD STATEMENT IS SPECIFIED : reason
FABH0091W
UNABLE TO PROCESS THE FOLLOWING PCB AS AN HSSR PCB (REASON: rrrrrrrr)
FABH0091W
DBD=xxxxxxxx, PCB#=yyyy, PCBNAME=zzzzzzzz
FABH0092W
PROCOPT=R IS SPECIFIED ON THE FOLLOWING HSSR PCB:
FABH0092W
DBD=xxxxxxxx, PCB#=yyyy, PCBNAME=zzzzzzzz
FABH0101E
//CARDIN FILE CONTAINS AN INVALID FSU CONTROL STATEMENT
FABH0102E
OPEN-ERROR FOR //CARDIN OR //PRNTOUT
FABH0103E
'DBD' OR 'PSC' CONTROL CARD MISSING IN //CARDIN
FABH0104E
INVALID NBR OF 'PSB' CONTROL-STATEMENTS IN //CARDIN
FABH0105E
NOGO-SWITCH SET BECAUSE OF PREVIOUS ERROR IN //CARDIN CONTROL STATEMENTS
FABH0106E
INVALID 'SEQUENCE CHECK OPTION' ON 'DBD' CARD IN //CARDIN
FABH0107E
INVALID 'SEQUENCE ERROR OPTION' ON 'DBD' CARD IN //CARDIN
FABH0108E
INVALID 'SEQUENCE ERROR PRINT OPTION' ON 'DBD' CARD IN //CARDIN
FABH0109E
'SEQUENCE ERROR THRESHOLD' FIELD ON 'DBD' CARD IS NOT NUMERIC
FABH0110E
MULTIPLE 'DBD' CONTROL STATEMENTS NOT ALLOWED IN //CARDIN
FABH0111E
INVALID 'POINTER BYPASS OPTION' ON 'DBD' CARD
FABH0112E
FABHFSU CANNOT RUN WITH ACB'S
FABH0113E
MULTIPLE 'BLM' CONTROL CARDS ARE NOT SUPPORTED
FABH0114E
MULTIPLE 'ELM' CONTROL CARDS ARE NOT SUPPORTED
FABH0115E
INVALID 'LIMIT VALUE TYPE' ON 'BLM' OR 'ELM' CONTROL CARD
FABH0116E
'RBN LIMIT VALUE' NOT NUMERIC OR ZERO ON 'BLM' OR 'ELM' CONTROL CARD
FABH0117E
'LL' FIELD NOT NUMERIC OR ZERO ON 'BLM' OR 'ELM' CONTROL CARD
FABH0118E
'LL' FIELD GREATER THAN 74 ON 'BLM' OR 'ELM' CONTROL CARD
FABH0119E
HEXADECIMAL STRING FOR LIMIT VALUE DOES NOT CONTAIN EVEN NUMBER OF HEXA-CHARACTERS
FABH0120E
'PCB NR' FIELD ON THE 'PSB' CONTROL CARD IS NOT NUMERIC
FABH0121E
INVALID FORMAT-NAME ON THE 'PSB' CONTROL CARD
FABH0122E
INVALID 'SEGMENT MODIFICATION OPTION' ON PSB CARD
FABH0123E
INVALID 'CONCATENATED KEY OPTION' ON PSB CARD
FABH0124E
INVALID 'EXIT CONTROL OPTION' ON PSB CARD
FABH0125E
INVALID 'DBR SKIP OPTION' ON PSB CARD
FABH0126E
INVALID 'DATA CONVERSION' OPTION ON PSB CARD
FABH0127E
'PSB NAME' FIELD MUST BE SPECIFIED AS '*' WHEN RUNNING IN ULU REGION TYPE
FABH0128E
'PSB NAME' FIELD MUST SPECIFY THE PSBNAME OF THE //EXEC PARM-FIELD
FABH0129E
PSB HAS NO DB-PCB WITH THE REQUESTED DBDNAME AND/OR REQUESTED RELATIVE NUMBER
FABH0130E
PCB WITH SPECIFIED 'RELATIVE PCB NUMBER' DOES NOT REFER TO DBD NAMED ON DBD CARD
FABH0131E
INVALID 'DEC' OPTION
FABH0132E
THERE IS NO JCL DD-STATEMENT FOR THE SPECIFIED 'DDNAME' ON THE 'PSB' CONTROL CARD
FABH0133E
'COn' CONTROL CARD INVALID: NO MATCHING OUTPUT FORMAT
FABH0134E
THERE IS NO JCL DD-STATEMENT FOR THE SPECIFIED 'DDNAME' ON THE CONTROL CARD
FABH0135E
MULTIPLE 'PSC' CONTROL STATEMENTS NOT ALLOWED
FABH0136E
INVALID //CARDIN CONTROL STATEMENT FOR A PSC OPERATION
FABH0137E
'PSC' AND 'DBD' CONTROL STATEMENTS ARE MUTUALLY EXCLUSIVE
FABH0138E
OPEN ERROR FOR //CNTLDD
FABH0139E
INCORRECT 'PARALLEL SCAN NAME'
FABH0140E
INCORRECT 'DBD NAME'
FABH0141E
'EXPECTED NUMBER OF SCANS' ON 'PSC' CONTROL CARD IS INVALID
FABH0142E
'PHASE NUMBER' ON 'PSC' CONTROL CARD INVALID
FABH0143E
'POINTER BYPASS OVERRIDE' INVALID
FABH0144E
'RERUN INDICATOR' INVALID
FABH0145E
'EXPIRATION DATE OVERRIDE' NOT NUMERIC
FABH0146E
'PHASE NUMBER' HIGHER THAN 'EXPECTED NUMBER OF SCANS'
FABH0147E
UNEXPECTED LAYOUT OF //CNTLDD CONTROL RECORD
FABH0148E
UNEXPECTED LAYOUT OF //CNTLDD CONTROL RECORD
FABH0149E
UNEXPECTED LAYOUT OF //CNTLDD CONTROL RECORD
FABH0150E
INCORRECT 'EXPECTED NUMBER OF SCANS'
FABH0151E
COMPARE OPTION IS NOT ALLOWED
FABH0152I
COMPARE OPTION DEACTIVATED BY SEGMENT EXTENSION OPTION
FABH0153E
SEGMENT EXTENSION OPTION ONLY VALID WITH HDAM OR HIDAM
FABH0154E
'LENGTH OF EXTENDED AREA' FIELD ON 'PSB' CARD IS NOT NUMERIC
FABH0155E
'LENGTH OF EXTENDED AREA' FIELD ON 'PSB' CARD IS TOO HIGH: MAXIMUM IS 32767
FABH0156E
'DATA CONVERSION' OPTION FOR PSB CONTROL STATEMENT IS NOT ALLOWED
FABH0157W
COMPRESSED SEGMENTS MUST BE DECOMPRESSED BEFORE CONVERSION; DECN IS IGNORED
FABH0158I
COMPARE OPTION DEACTIVATED BY BLDLPCK CONTROL STATEMENT
FABH0159W
DECY FORCED SINCE KEY COMPRESSION OPTION IS SPECIFIED FOR THE ROOT SEGMENT OF HIDAM DB
FABH0161E
FABHFSU DOES NOT SUPPORT SECONDARY INDEX PROCESSING
FABH0162E
'LIMIT VALUE TYPE' ON BLM/ELM CONTROL STATEMENT INVALID FOR TYPE OF DB-ORG
FABH0164E
HIGH-KEY IS SPECIFIED ON BLM/ELM CONTROL STATEMENT
FABH0165E
BLM OR ELM CONTROL STATEMENT IS SPECIFIED FOR A HALDB
FABH0170E
HSSR ENGINE IS NOT INITIALIZED
FABH0171E
FABHFSU ENVIRONMENT NOT PROPERLY INITIALIZED
FABH0172E
'LIMIT VALUE TYPE' = 'R' IS ONLY VALID FOR HDAM
FABH0175E
UNEXPECTED PCB STATUSCODE
FABH0176E
DDN=ddname BLKSIZE OR LRECL IS TOO SMALL
FABH0177E
DDN=ddname OPEN HAS FAILED
FABH0178E
MIGRATION UNLOAD IS NOT SUPPORTED FOR THIS DATABASE TYPE
FABH0179E
TWO OR MORE PSB CANNOT BE SPECIFIED WITH THE MI OPTION
FABH0180E
INVALID SEGMENT LENGTH RETURNED FROM USER EXIT ROUTINE
FABH0181E
USER PROGRAMMING ERROR: LENGTH OF CURRENT OUTPUT RECORD IS TOO BIG
FABH0182E
INVALID RETURN CODE FROM USER ROUTINE
FABH0183E
DDN=ddname: OPEN HAS FAILED
FABH0184E
DDN=ddname OUTPUT AND INPUT STATISTIC RECORDS ARE NOT EQUAL
FABH0185E
DDN=ddname OUTPUT AND INPUT RECORDS NOT EQUAL
FABH0186E
DDN=ddname CONTAINS TOO MANY RECORDS
FABH0187E
DDN=ddname CONTAINS TOO FEW RECORDS
FABH0190E
DDN=ddname LENGTH OF INPUT AND OUTPUT RECORDS DIFFER
FABH0191E
DB ERROR ENCOUNTERED AND "POINTER BYPASS OPTION" NOT ACTIVATED
FABH0192E
SEQUENCE ERROR THRESHOLD EXHAUSTED
FABH0193E
ROOT-SEGMENT IS NOT SEQUENCED
FABH0194E
DDN=ddname: DSNAME IS NOT VALID
FABH0195E
RETURN CODE 4 FROM HDAM RANDOMIZER, RMOD=xxxxxxxx
FABH0201E
OPEN ERROR FOR //IMS DD
FABH0202E
FABHFSU ENCOUNTERED AN UNEXPECTED ERROR
FABH0203W
WARNING: SOME SEGMENTS WILL NOT BE DECOMPRESSED
FABH0204W
COMPARE OPTION CANNOT BE USED FOR THIS FABHFSU EXECUTION
FABH0205W
COMPARE OPTION CANNOT BE USED FOR THIS FABHURG1 EXECUTION
FABH0206I
SOME SEGMENTS WILL NOT BE DECOMPRESSED
FABH0211E
ENQ CONFLICT: OTHER JOB CURRENTLY ACTIVE FOR THE SAME PSC PHASE
FABH0212E
DATE FOR PSC RUN HAS ALREADY EXPIRED
FABH0213E
PSC PHASE HAS ALREADY BEEN STARTED
FABH0214E
DDN=ddname: BLOCKSIZE SHOULD NOT CHANGE
FABH0215I
ALL SCAN PHASES STARTED
FABH0216E
PARTITION DB IS NOT SUPPORTED IN PSF MODE
FABH0221E
UNEXPECTED LAYOUT OF PSC CONTROL-FILE RECORDS
FABH0222E
UNEXPECTED CONDITION ON PSC CONTROL FILE: PHASE ALREADY COMPLETED
FABH0223I
ALL SCAN PHASES COMPLETED
FABH0224W
NO SEGMENT WAS RETRIEVED
FABH0225W
NO SEGMENT WAS RETRIEVED IN THE CURRENT PSF PHASE
FABH0231E
PCB'S CANNOT BE FOUND
FABH0232E
PSB HAS NO DB-PCB'S
FABH0233E
SYSIN CANNOT BE OPENED
FABH0234E
INVALID TYPE OF CONTROL STATEMENT
FABH0235E
SPECIFIED PCB IS NEITHER A HSSR-PCB NOR A DL/I-DB-PCB
FABH0236E
SPECIFIED PCB-NUMBER NOT WITHIN PSB
FABH0237E
GU WITH SSA NOT POSSIBLE BECAUSE ROOT HAS NO KEY-FIELD
FABH0238E
THE 'NUMBER FIELD' IS NOT NUMERIC
FABH0239E
REPL STATEMENT IS NOT SUPPORTED FOR PARTITION DB
FABH0240E
UNEXPECTED CONTINUATION STATEMENT
FABH0241E
ILLEGAL CONTINUATION; KEY FIELD SHOULD END ON THIS CONTROL STATEMENT
FABH0242E
CONTINUATION CARD IS MISSING
FABH0243E
SYSPRINT CANNOT BE OPENED
FABH0248W
INCORRECT ROOT KEY IN GU-CALL (STATUS CODE FM)
FABH0249E
PCB WITH SPECIFIED DBDNAME NOT FOUND
FABH0250E
FABH001 HAS NOT BEEN PROPERLY INITIALIZED
FABH0251E
SYSPRINT COULD NOT BE OPENED
FABH0252E
INVALID STATEMENT WAS DETECTED
FABH0253E
PCB NUMBER IS NOT POSITIVE
FABH0254E
SPECIFIED HSSR PCB IS NOT FOUND
FABH0255E
NUMERIC FIELD IS NOT NUMERIC
FABH0256E
BLKSIZE OR LRECL OF ddname IS TOO SMALL
FABH0257E
OPEN OF ddname HAS FAILED
FABH0258E
THERE ARE NO HSSR PCBS
FABH0259E
USER PROGRAMMING ERROR: LENGTH OF CURRENT ddname RECORD IS TOO LARGE
FABH0260E
INVALID RETURN CODE FROM USER ROUTINE
FABH0261E
OPEN OF SYSUT1 HAS FAILED
FABH0262E
RECORDS OF ddname ARE NOT EQUAL
FABH0263E
SYSUT1 CONTAINS MORE DATA RECORDS THAN ddname
FABH0264E
SYSUT1 CONTAINS LESS DATA RECORDS THAN ddname
FABH0265W
SIZE OF STATISTIC TABLES ARE NOT THE SAME IN SYSUT1 AND ddname
FABH0266W
COMPARE OF SYSUT1 AND ddname STOPPED
FABH0267E
GG STATUS CODE ENCOUNTERED AND SKERROR OPTION WAS NOT ACTIVATED
FABH0268W
WARNING: NOT ALL SEGMENTS WERE SENSITIVE
FABH0269W
WARNING: SOME SEGMENTS HAVE BEEN SKIPPED BY USER ROUTINES
FABH0270W
WARNING: SOME SEGMENTS HAVE A VIRTUAL LOGICAL PARENT KEY
FABH0271W
WARNING: SEGMENTS MAY BE MISSING ON UNLOADED OUTPUT BECAUSE OF GG STATUS CODE
FABH0272I
DB UNLOAD COMPLETE
FABH0273I
nnn,nnn,nnn DB RECORDS RETRIEVED - DBD=dbdname PART=ddname
FABH0274E
RETURN CODE 4 FROM HDAM RANDOMIZER, RMOD=xxxxxxxx
FABH0275W
WARNING: NO SEGMENT WAS RETRIEVED
FABH0276I
USEGMAX STATEMENT IS IGNORED
FABH0278I
NOT ALL PARTITIONS ARE PROCESSED
FABH0279E
'DATA CONVERSION' OPTION FOR EXIT CONTROL STATEMENT IS NOT ALLOWED
FABH0280E
INVALID 'DATA CONVERSION' OPTION ON EXIT CONTROL STATEMENT
FABH0281E
OUTPUT FORMAT *CS IS NOT SUPPORTED FOR THIS DATABASE: DBD=dbdname
FABH0282E
[MIGRATION|FALLBACK] UNLOAD IS NOT SUPPORTED IN THIS REGION TYPE
FABH0283E
INVALID PART STATEMENT IS SPECIFIED: reason
FABH0284E
INCORRECT CHECKREC OPTION
FABH0285E
OUTPUT FORMAT *CP IS NOT SUPPORTED FOR THIS DATABASE: DBD=dbdname
FABH0286E
SPECIFIED DBVER IS NOT SUPPORTED
FABH0287E
LOAD FAILED FOR MODULE: module
FABH0288E
SINGLE PARTITION PROCESSING IS NOT SUPPORTED
FABH0289E
CEEPIPI ERROR OCCURRED. FUNC=function, RC=return_code
FABH0290E
MUTUALLY EXCLUSIVE CONTROL STATEMENTS ARE SPECIFIED: xxxxxxxx AND yyyyyyyy
FABH0291E
AN ERROR IS FOUND IN A 'PARTITION' CONTROL STATEMENT: reason
FABH0292E
MIGRATE CONTROL STATEMENT IS SPECIFIED FOR AN UNSUPPORTED DB TYPE
FABH0293E
FALLBACK CONTROL STATEMENT IS SPECIFIED FOR NON-HALDB
FABH0294E
INVALID UNLOAD FORMAT IS SPECIFIED FOR [MIGRATION|FALLBACK] UNLOAD
FABH0295E
USEGMAX CONTROL STATEMENT IS SPECIFIED FOR [MIGRATION|FALLBACK] UNLOAD
FABH0296E
LE OPTION IS NOT ALLOWED WHEN THE RUN TIME ENVIRONMENT EXIT ROUTINE IS BEING INVOKED
FABH0299I
UNLOAD FUNCTION ENDED, HIGHEST RETURN CODE IS xxx (REASON CODE: yyyy)
FABH0300E
ERROR IN OPENING SYSIN
FABH0301E
//EXEC PARM-FIELD SHOULD BEGIN WITH NAME OF REGION CONTROLLER FOLLOWED BY '/'
FABH0302E
NAME OF REGION CONTROLLER IN //EXEC PARM-FIELD IS LONGER THAN 8 BYTES
FABH0303E
PGM-NAME HAS NOT BEEN PROVIDED ON //EXEC PARM-FIELD
FABH0304E
PGM-NAME IN //EXEC PARM-FIELD IS LONGER THAN 8 BYTES
FABH0305E
DFSURGU0 ALREADY IN VIRTUAL STORAGE
FABH0306E
UNEXPECTED RETURN CODE FROM IDENTIFY
FABH0307E
LOAD MODULE FABH000 IS NOT REENTRANT
FABH0308E
MEMBER NAME DFSURGU0 IS INVALID FOR A JOB RUNNING IN ULU REGION
FABH0309E
FABH001 IS NOT REUSABLE
FABH0310E
MODULE FABH001 IS NOT REUSABLE; PLEASE INFORM YOUR IMS–SPECIALISTS
FABH0311E
DYNAMIC ALLOCATION FAILED FOR DD xxxxxxxx: RC=xx RSN=yyyy
FABH0312E
DFSVSAMP OPEN FAILURE OCCURRED
FABH0313E
SYNTAX ERROR IN SYSIN CONTROL STATEMENTS
FABH0314E
HSSR INITIALIZATION FAILED
FABH0315E
[GU/GHU/GN/GHN/GNP/GHNP] CALL SSA-n IS UNSUPPORTED: reason
FABH0316E
ERROR RETURN FROM IGWASYS (RC=xx, RSN=yy)
FABH0319E
GN WITH QUALIFIED SSA CALL IS ISSUED TO THE COMPRESSED ROOT KEY
FABH0320E
GB ON PCF OR TWIN-NOT-ROOT
FABH0321E
RBA OUT OF DB-RANGE
FABH0322E
S-C DOES NOT MATCH
FABH0324E
BAD RETURN-CODE FROM BUFFER HANDLER
FABH0325E
INVALID SEGMENT-CODE IN HISAM
FABH0326E
BAD RETURN-CODE FROM BUFFER-HANDLER (KSDS)
FABH0327E
BAD RETURN-CODE FROM BUFFER-HANDLER (ESDS/OSAM)
FABH0329E
REPLACE CALL WITHOUT PREVIOUS SUCCESSFUL GH CALL
FABH0330E
INVALID CALL-FUNCTION
FABH0331E
INVALID PARM-NUMBER IN GN-CALL
FABH0332E
SEGMENT-NAME IN SSA IS NOT ROOT-NAME
FABH0333E
SEGMENT-NAME IN SSA NOT FOLLOWED BY A BLANK
FABH0334E
ROOT-SEGMENT IS NOT (DATA-) SENSITIVE
FABH0335E
INTERNAL ERROR OCCURRED IN HSSR CALL HANDLER
FABH0336E
NO ERROR TEXT AVAILABLE
FABH0337E
ADDRESS-LIST OF HSSR CALL-PARAMETERS IS INVALID
FABH0338E
INCORRECT SEGMENT NAME IN SSA
FABH0339E
A DEPENDENT SEGMENT IS NOT (DATA-) SENSITIVE
FABH0340E
EXECUTION IN AN ONLINE REGION IS NOT SUPPORTED
FABH0341E
PST LAYOUT HAS CHANGED
FABH0342E
LANGUAGE OF PSB IS NOT SUPPORTED
FABH0343E
HSSR INITIALIZATION HAS INTERCEPTED A PGM CHECK
FABH0344E
LAYOUT OF PCPARMS AND/OR RCPARMS HAS CHANGED
FABH0346E
DB-ACCESS NOT AUTHORIZED BY DBRC
FABH0347E
INVALID PSB OR DBD CONTROL-BLOCKS FOR FABHFSU
FABH0348E
INTERNAL ERROR OCCURRED IN HSSR CALL ANALYZER
FABH0349E
PSB HAS NO PCB'S
FABH0350W
HSSR CALLS FALL BACK TO DL/I FOR [NAMED DBD|ALL DBD'S] BECAUSE OF FOLLOWING PROBLEM IN DBD=dbdname
FABH0351W
SYSTEM PERFORMANCE WILL SLOW DOWN, PLEASE INFORM YOUR IMS SPECIALISTS
FABH0352E
THE FALL BACK IS ABORTED BECAUSE HSSRSNAP DD IS NOT SPECIFIED
FABH0353E
GET-BY-RBA CALL IS NOT SUPPORTED FOR THE PARTITIONED DB: DBD=xxxxxxxx
FABH0354E
REPL CALL IS NOT SUPPORTED FOR THE PARTITIONED DB: DBD=xxxxxxxx
FABH0355E
DBRC REQUIRED FOR THIS EXECUTION
FABH0356E
COMMAND CODE IS NOT SUPPORTED FOR HALDB DB: DBD=dbdname
FABH0358E
REPL CALL IS ISSUED FOR THE FOLLOWING HSSR PCB:
FABH0358E
[DBD=xxxxxxxx | DBD=xxxxxxxx(PARTITIONED)], PCB#=yyyy, PCBNAME=zzzzzzzz
FABH0360E
INVALID STATEMENT IN HSSROPT DD HAS BEEN IGNORED
FABH0361E
INVALID KEYWORD ON TRHC STATEMENT WAS DETECTED
FABH0362E
START KEYWORD ON TRHC STATEMENT SHOULD BE FOLLOWED BY A COMMA OR BLANK
FABH0363E
INVALID START KEYWORD ON TRHC STATEMENT WAS DETECTED
FABH0364E
INVALID TRXC STATEMENT HAS BEEN IGNORED
FABH0365E
INVALID BUF STATEMENT HAS BEEN IGNORED
FABH0366E
INVALID DBSTATS STATEMENT HAS BEEN IGNORED
FABH0368E
INVALID RETRY STATEMENT HAS BEEN IGNORED
FABH0369E
INVALID KEYWORD ON GOTRETRY STATEMENT WAS DETECTED
FABH0370E
RETRY NUMBER EXCEEDS MAXIMUM VALUE
FABH0371E
WAIT TIME EXCEEDS MAXIMUM VALUE
FABH0372E
NUMERIC FIELD SHOULD BE FOLLOWED BY A COMMA OR BLANK
FABH0373E
NUMERIC FIELD IS TOO LONG
FABH0374E
INVALID SKERROR STATEMENT HAS BEEN IGNORED
FABH0375E
INVALID KEYCHECK STATEMENT HAS BEEN IGNORED
FABH0376E
INVALID KEYWORD ON DIAGG STATEMENT WAS DETECTED
FABH0377E
INVALID CABSTAT CONTROL STATEMENT IS SPECIFIED
FABH0378W
DATXEXIT YES IS IGNORED BECAUSE OF IMS LEVEL
FABH0379E
AN INVALID OPERAND IS SPECIFIED FOR THE PARTINFO CONTROL STATEMENT
FABH0380W
BUFFER TRACE WILL NOT BE TAKEN FOR HALDB: dbdname
FABH0381E
DBD IS NOT A PHYSICAL DBD
FABH0382E
SEGMENT CODE IN SDB'S ARE NOT ASCENDING
FABH0383E
SEGMENTS ARE NOT ALL IN SAME DATABASE
FABH0384I
PROCSEQ=indexdbd IS SPECIFIED IN PCB#=nnn
FABH0386E
MORE THAN 10 DATA SET GROUPS NOT SUPPORTED
FABH0387E
DMB POINTERS TO PSDB'S OR AMP NOT OK
FABH0388E
UNSUPPORTED DBD: IMS/ESA® PARTITION SUPPORT PRODUCT
FABH0389E
MORE SDB'S THAN PSDB'S
FABH0390E
LENGTH OF PSDB'S NOT OK
FABH0391E
SEGMENT CODE OF PSDB'S NOT ASCENDING
FABH0393E
SDBPSDB DOES NOT POINT TO PSDB
FABH0394E
NUMBER OF DSG'S CALCULATED FROM MASTER DMB IS UNEQUAL TO THE NUMBER CALCULATED FROM DMB FOR PARTITION ppppppp
FABH0395E
PREFIX SIZE IN PSDB NOT OK
FABH0396E
SENSITIVE VIRTUAL LOGICAL CHILD (segmname) IS FOUND IN PCB#=nnnn
FABH0397E
UNSUPPORTED DATABASE ORG
FABH0398E
INDEX DMB NOT FOUND
FABH0399I
HALDB dbdname IS DEFINED AS OSAM8G
FABH0400I
DB HAS VIRTUAL LOGICAL CHILD SEGMENT (segmname)
FABH0403E
SEC LIST FOR INDEXED-SEGM NOT FOUND
FABH0404E
PCB WITH FIELD SENSITIVITY NOT SUPPORTED
FABH0405E
INDEX DMB dbdname IS NOT FOUND
FABH0406E
INDEX DBD dbdname IS NOT SUPPORTED
FABH0407E
DMB dbdname IS NOT CORRECT
FABH0411E
SEGMENT CODE IN SDB AND HSDB DISAGREE
FABH0412E
VIRTUAL PAIRED SEGMENTS NOT SUPPORTED
FABH0413E
INVALID SEGMENT SENSITIVITY FOR AN HSSR PCB
FABH0415E
SOMETHING WRONG WITH NUMBER OF HPTRS
FABH0416E
SOMETHING WRONG WITH NUMBER OR LENGTH OF HSDB
FABH0420W
WARNING: SEGMENT segname HAS A VIRTUAL LOGICAL PARENT KEY
FABH0421E
REPLACE PROCOPT NOT SUPPORTED FOR DB-ORGANIZATION OF DB=dbdname
FABH0422E
REPLACE PROCOPT NOT SUPPORTED FOR BLOCK-LEVEL SHARED DB=dbdname
FABH0423E
REPLACE PROCOPT NOT SUPPORTED FOR PHYSICAL PAIRED SEGMENT=segname
FABH0424E
REPLACE PROCOPT NOT SUPPORTED FOR INDEX-SOURCE SEGMENT-TYPE=segname
FABH0425E
REPLACE PROCOPT NOT SUPPORTED WITH VIRTUAL LP-KEY, SEGMENT-TYPE=segname
FABH0426E
OTHER PCB'S MAY NOT HAVE AN UPDATE PROCESSING OPTION, SEGMENT-TYPE=segname
FABH0430W
DB WILL BE READ BY HSSR WITHOUT READ-INTEGRITY
FABH0433W
RBN VALUE IS LARGER THAN THE SIZE OF THE PARTITION DATA SET (DDNAME: ddname)
FABH0441E
STATISTIC PRINTER GOT INVALID CALL
FABH0451E
SKIP-COUNT EXHAUSTED
FABH0452W
HSSR CALL HANDLER RETURNS FIRST GG STATUS CODE
FABH0453E
UNEXPECTED ENTRY INTO FABH080
FABH0457E
HSSR DETECTED AN UNEXPECTED ERROR SITUATION
FABH0461E
COMPARE OPTION HAS DETECTED AN INEQUALITY BETWEEN HSSR AND DL1
FABH0462E
THE PARTITIONS SELECTED BY HSSR AND DL/I ARE UNEQUAL; HSSR-PID=xxxx (NAME: xxxxxxx), DL/I-PID=xxxx (NAME: xxxxxxx)
FABH0463E
HSSR REACHED THE END OF THE PARTITION ppppppp EARLIER THAN DL/I
FABH0465E
AN UNSUPPORTED HSSR CALL WAS ISSUED FOR NON-HD DATABASE xxxxxxxx
FABH0471E
OPEN OF DDNAME=HSSRBUTR HAS FAILED
FABH0473E
INTERNAL ERROR OCCURRED IN HSSR CALL HANDLER
FABH0475E
INTERNAL ERROR OCCURRED IN HSSR CALL HANDLER
FABH0477E
INTERNAL ERROR OCCURRED IN HSSR CALL HANDLER
FABH0479E
INTERNAL ERROR OCCURRED IN HSSR BUFFER HANDLER
FABH0480E
INVALID DATABASE ORGANIZATION
FABH0481E
INVALID PARAMETER NUMBER IN CALL
FABH0482E
INCORRECT CALL FUNCTION
FABH0483E
INCORRECT SEGMENT NAME IN SSA
FABH0484E
INCORRECT FIELD NAME IN SSA
FABH0485E
LEFT PARENTHESIS IN SSA IS MISSING OR AT WRONG POSITION
FABH0486E
RELATIONAL OPERATOR IN SSA IS INCORRECT
FABH0487E
RIGHT PARENTHESIS IN SSA IS MISSING OR AT WRONG POSITION
FABH0488E
DB ORG IS NOT HIDAM OR HDAM
FABH0489E
UNSUPPORTED COMMAND CODE
FABH0490E
SEGMENT CODE OF RETRIEVED RBA IS NOT THE SEGMENT CODE OF REQUESTED SEGMENT
FABH0491E
REQUESTED RBA NOT IN DATA SET
FABH0492E
ROOT HAS NO SEQUENCE FIELD
FABH0499E
INTERNAL ERROR OCCURRED IN HSSR CALL HANDLER
FABH0501E
DATA SET GROUP NUMBER NOT POSITIVE
FABH0502E
DATA SET GROUP NUMBER DOES NOT EXIST
FABH0503E
PCB IS NOT SENSITIVE TO ANY SEGMENT OF SPECIFIED DATA SET GROUP
FABH0504E
NO OSAM/ESDS IN DATABASE
FABH0505E
RBA NOT WITHIN SPECIFIED DATA SET
FABH0506E
BUFFER HANDLER IO-ERROR
FABH0507E
INVALID SUBTYPE OF *Z COMMAND CODE
FABH0511E
POINTER IN INDEX TO ROOT-SEGMENT IS ZERO
FABH0512E
INVALID RETURN-CODE FROM BUFFER-HDLR
FABH0513E
SEGMENT-CODE NOT 01
FABH0515E
CANNOT POSITION THE FIRST SEGMENT IN THE DB
FABH0516E
LAST SEGM IN PRIMARY INDEX DOES NOT POINT TO SEGMENT WITH A KEY OF ALL X'FF'S
FABH0517E
HSSR CALL HANDLER DETECTED UNEXPECTED ERROR SITUATION
FABH0521E
POINTER DESCRIBED BY HSDB1-HPTR1 IS NOT A ROOT-TWIN- POINTER
FABH0523E
SEGMENT-CODE OF LOCATED SEGMENT NOT 01
FABH0524E
BLM BLOCK-NUMBER NOT WITHIN RAA
FABH0525E
RETURN CODE 8 FROM HDAM RANDOMIZER, RMOD=xxxxxxxx
FABH0526E
RETURN CODE 8 FROM RANDOMIZER: DBFxxxxx
FABH0527E
INVALID PARTITION NUMBER 'xxxxxxxx' RETURNED FROM THE RANDOMIZER: DBFyyyyy
FABH0528E
INVALID RELATIVE RAP NUMBER 'xxxxxxxx' FOR PART#:nnn RETURNED FROM RANDOMIZER: DBFyyyyy
FABH0541E
SEGMENT CODE OF ROOT NOT 01
FABH0547E
INVALID RETURN CODE FROM BUFFER HANDLER
FABH0551E
INVALID S-C OR D-F IN SPLIT DATA SEGM
FABH0552E
INVALID RC FROM BUF HDLR
FABH0553E
USER COMPRESSION ROUTINE HAS RETURNED A TOO LONG SEGMENT
FABH0554E
SEGMENT ssssssss IN DATA BASE dddddddd HAS INVALID VALUE FOR THE LENGTH FIELD
FABH0555E
KEYCHECK OPTION HAS DETECTED A SEQUENCE ERROR; ABEND FOLLOWS
FABH0556E
AN OCCURRENCE OF SEGMENT segmname IN DBD dddddddd OVER THE BLOCK BOUNDARY
FABH0557W
HSSR CALL HANDLER RETURNS FIRST GX STATUS CODE
FABH0559E
INTERNAL ERROR OCCURRED IN HSSR CALL HANDLER
FABH0560E
STATUSCODE=xx ENCOUNTERED DURING INTERNAL ASMTDLI CALL
FABH0561E
REPL CALL WITHOUT REPLACE PROCESSING OPTION
FABH0562E
REPL CALL WITHOUT IOAREA
FABH0563E
REPL CALL WITH SSA
FABH0564E
STATUSCODE=xx ENCOUNTERED DURING INTERNAL GHU ASMTDLI CALL
FABH0565E
STATUSCODE=xx ENCOUNTERED DURING INTERNAL REPL ASMTDLI CALL
FABH0566E
INTERNAL HSSR OR DL1 ERROR DURING PROCESSING OF REPL CALL
FABH0567E
PCB-FEEDBACK: DBDNAME=dbdname SEGNAME = segname
FABH0568I
FIRST REPL CALL IS BEING ISSUED FOR PCB=xxxxxxxx
FABH0569E
REPL CALL WITHOUT PCB
FABH0570E
text
FABH0572E
INTERNAL ERROR --- MODCB FOR KSDS NOT SUCCESSFUL
FABH0573E
INTERNAL ERROR --- RPL FOR KSDS NOT INACTIVE
FABH0574E
VSAM LOGICAL ERROR --- RPL-FDBK-CODE IS IN R3
FABH0575E
INTERNAL ERROR --- ENDREQ FAILED
FABH0576E
DDNAME=ddname; DATA REQUEST OUTSIDE OF THE DATASET LIMITS
FABH0577E
RETRY OF KSDS I/O OPERATIONS NOT ENABLED
FABH0578E
UNEXPECTED RETURN CODE FROM ATTACH
FABH0579E
UNEXPECTED RETURN CODE FROM DETACH
FABH0581E
OPEN OF DBD=dbdname DDN=ddname --- "yyyy" "text"
FABH0591E
OPEN OF DBD=dbdname ---- "yyyy" "text"
FABH0592E
UNACCEPTABLE VSAM LOGICAL ERROR (RPLREQ=xx, RPLFDBWD=xxxxxxxx)
FABH0595E
STATUSCODE=XX ENCOUNTERED DURING INTERNAL ASMTDLI CALL (segmname)
FABH0596E
STATUSCODE=XX ENCOUNTERED DURING INTERNAL ASMTDLI CALL (segmname)
FABH0597E
STATUSCODE=XX ENCOUNTERED DURING INTERNAL ASMTDLI CALL (segmname)
FABH0598E
STATUSCODE=XX ENCOUNTERED DURING INTERNAL ASMTDLI CALL (segmname)
FABH0602E
BAD RETURN CODE FROM OSAM MACRO ... PLEASE REFER TO PRECEDING DFS730I MESSAGE
FABH0603E
ddname DD-STATEMENT IS MISSING; UNABLE TO OPEN DATA SET
FABH0604E
DATA SET IS NOT INITIALIZED AND IS EMPTY: DB=dbdname, DD=ddname
FABH0605E
RDJFCB MACRO FAILED ON DDNAME: ddname (RC=xx)
FABH0606E
OBTAIN MACRO FAILED ON DDNAME: ddname (RC=xx)
FABH0607I
DD=dd_name BLOCK SIZE IS NOT SIZE DEFINED IN RECON
FABH0608E
RANSIZE IS TOO LOW: MINIMUM IS nnn
FABH0611E
OPEN OF DBD=dbdname DDN=ddname --- ESDS GEN BLOCK= RPL FAILED
FABH0621E
PAGE-FIXING HAS FAILED
FABH0622E
HSSR FAILED IN PARTITION SELECTION; REQUEST=xxxxxx, RC=yy, RSN=zzzzz
FABH0623E
SELECTED PARTITION ppppppp OF DATABASE dddddddd IS NOT AVAILABLE
FABH0624E
TARGET PARTITION ppppppp IS NOT FOUND
FABH0625E
USER PARTITION SELECTION FAILED (SELECTION TYPE=aaaaaa)
FABH0626E
PARTITION SELECTION EXIT ROUTINE REQUESTED A PSEUDO ABEND (SELECTION TYPE=aaaaaa, RC=xx)
FABH0627E
EXIT ROUTINE xxxxxxxx RETURNED RC=03 ALTHOUGH PARTITION AND CO STATEMENTS ARE SPECIFIED
FABH0628E
EXIT ROUTINE xxxxxxxx RETURNED RC=16 ALTHOUGH PARTITION AND CO STATEMENTS ARE SPECIFIED
FABH0629W
PARTITION ppppppp IS SKIPPED BECAUSE OF AN ERROR IN PARTITION SELECTION
FABH0630E
CANNOT PROCESS THE PARTITION NEXT TO ppppppp BECAUSE OF STATUS CODE 'GG' FROM THE PRIOR DL/I CALL
FABH0631E
PROBLEMS WITH DL/I-STAT CALL
FABH0632E
CLOSE FAILED
FABH0633E
TARGET PARTITION IS NOT FOUND FOR THE SPECIFIED KEY
FABH0634E
ONLINE REORG RUNNING FOR PARTITION=pppppppp (DBD=dddddddd)
FABH0635W
ONLINE REORG ACTIVE FOR PARTITION=pppppppp (DBD=dddddddd)
FABH0636E
UNSUPPORTED OPTION FOR OLR ACTIVE PARTITIONS: option
FABH0637W
HSSR CALLS FALL BACK TO DL/I FROM PARTITION=pppppppp (DBD=dddddddd)
FABH0638W
SPECIFIED DBVER IS NOT SUPPORTED. HSSR CALLS FALL BACK TO DL/I
FABH0639E
IMS TOOLS CATALOG INTERFACE ERROR: FUNCTION=func RC=rc RSN=rsn
FABH0640E
DBD=dbdname IS NOT FOUND IN THE IMS DIRECTORY DATA SETS
FABH0641E
VSAM PHYSICAL I/O ERROR
FABH0642E
VSAM LOGICAL ERROR; RPL-FDBK-CODE IS IN R3
FABH0643E
SHOWCB OF RPL-FDBK-CODE FAILED
FABH0645I
ZIIP TIME (HH:MM:SS.THMIJU) WAS: hh:mm:ss.thmiju
FABH0646E
ERROR RETURNED FROM GEXAPI00: FUNC=xxxxxxx, SERVICE CODE=xxxx, RC=xxxx, RSN=xxxx
FABH0653E
OSAM I/O ERROR, DDNAME=ddname DECB-STATUS=xxx...20
FABH0654E
MEDIA MANAGER function ERROR, RC=rc
FABH0655E
MEDIA MANAGER I/O ERROR, RC=rc
FABH0656I
MEDIA MANAGER IS USED TO ACCESS DB: dbdname
FABH0657E
STEPLIB IS NOT APF-AUTHORIZED
FABH0658W
"HPIO YES" IS IGNORED DUE TO IMS HD UNLOAD COMPATIBILITY MODE
FABH0659E
SPECIFIED DBVER IS NOT SUPPORTED
FABH0660W
COMPAUTH YES IS IGNORED IN UNAUTHORIZED PROGRAM
FABH0661E
RBA REQUEST BEYOND ORIGINAL DATA SET LIMITS DDNAME=ddname
FABH0662E
OPEN OF DBD=dbdname DDN=ddname --- ESDS "text"
FABH0663E
RETRYING KSDS I/O OPERATIONS
FABH0664E
OPEN OF DBD=dbdname DDN=ddname --- KSDS "text"
FABH0670W
DB-ACCESS NOT AUTHORIZED BY DBRC: DB=dbdname
FABH0671W
DB (xxxxxxxx) PCB IS NOT A VALID HSSR PCB, RC=yyyyyyy
FABH0672E
INVALID NUMBER OF PARAMETERS FOR PLIHSSR CALL
FABH0673E
INCORRECT PCB ADDRESS WAS PASSED BY APPLICATION PROGRAM
FABH0674E
ERROR FOUND IN HSSR CALL STATEMENT, INVALID xxxxxx
FABH0675E
ROOT SEGMENT POSITION IS NOT ESTABLISHED
FABH0676E
INCORRECT COMPAUTH CONTROL STATEMENT IS SPECIFIED
FABH0677E
INVALID SKIPAUTH CONTROL STATEMENT IS SPECIFIED
FABH0678E
INCORRECT HPIO CONTROL STATEMENT IS SPECIFIED
FABH0679E
INCORRECT SKIPVLC CONTROL STATEMENT IS SPECIFIED
FABH0680E
FABHKEYX CANNOT PROCESS THE COMPRESSED ROOT KEY
FABH0681E
INCORRECT APISET CONTROL STATEMENT IS SPECIFIED
FABH0682E
xxxxxxxx CANNOT BE SPECIFIED WHEN APISET 3 IS SELECTED
FABH0683E
INCORRECT PCBLIST CONTROL STATEMENT IS SPECIFIED
FABH0684I
DD=ddname01 HIGHKEY=KeyString SEGMENT=segname1 n,nnn,nnn,nnn OCCURRENCES *TOTAL n,nnn,nnn,nnn OCCURRENCES
FABH0685E
INCORRECT STATEMENT IS FOUND IN FABHKEYX DATA SET
FABH0686E
HIGH KEY VALUES ARE NOT SPECIFIED IN ASCENDING ORDER
FABH0687E
OPEN FAILED FOR DDNAME: ddname
FABH0688E
BLKSIZE OR LRECL OF ddname IS TOO SMALL
FABH0689E
MIGRATE CONTROL STATEMENT IS NOT SPECIFIED
FABH0690E
ROOT SEGMENT HAS NO SEQUENCE-FIELD
FABH0691E
STATUS CODE=xx RETURNED ON AN INTERNAL DL/I CALL
FABH0692E
ERROR RETURN CODE xx IN RESPONSE TO A DL/I REQUEST ON DDNAME ddname FOR FUNCTION yy
FABH0693E
STATUS CODE=xx RETURNED ON AN INTERNAL DL/I CALL
FABH0695I
DL/I CALLS TO HSSR PCB (PCB#=nnnn) ARE PASSED TO IMS DL/I
FABH0696I
"SKIPAUTH YES" IS APPLICABLE ONLY TO HALDB
FABH0697E
INCORRECT CABBASE CONTROL STATEMENT IS SPECIFIED
FABH0698E
INCORRECT ZIIPMODE CONTROL STATEMENT IS SPECIFIED
FABH0700E
FIRST CONTROL STATEMENT ID IS NOT MAP
FABH0701E
DBDNAME IS MISSING OR HAS IMBEDDED BLANKS
FABH0702E
INDEX DBDNAME HAS IMBEDDED BLANKS
FABH0703E
THIS SEGMENT ENTRY IS NOT ROOT SEGMENT
FABH0704E
NO FIELD IS PRESENT IN DBD
FABH0705E
KEY FIELD IS NOT FOUND IN DBD
FABH0708E
KEY TYPE IS NOT C, X, OR BLANK
FABH0709E
SELECT KEY OPTION IS NOT A, D, E, N, V, Y, OR BLANK
FABH0710E
RELATIVE BLOCK IS MISSING OR HAS IMBEDDED BLANKS
FABH0711E
DELTA IS MISSING OR HAS IMBEDDED BLANKS
FABH0712E
INVALID INDEX DBD NAME
FABH0713E
END CONTROL STATEMENT IS MISSING OR OUT OF PLACE
FABH0714E
INDEX TARGET SEGMENT IS NOT A ROOT SEGMENT
FABH0715E
NO HIDAM INDEX DBD NAME IS SPECIFIED
FABH0716E
INDEX FIELD NAME IS NOT FOUND IN BASE DBD FIELD TABLE
FABH0717E
INDEX FIELD IS NOT AN XFLD IN BASE DBD
FABH0719E
FIRST VSAM INDEX RECORD POINTER IS ZERO
FABH0720E
DBD IS NOT HIDAM OR HDAM
FABH0721E
VSAM INDEX FAILURE ON OPEN, SHOWCB OR MODCB
FABH0722E
FIND FAILED FOR MEMBER xxxxxxxx IN DBDLIB - R15:yy - R0:zz
FABH0723I
INDEX DBD LRECL IS NOT ACTUAL LRECL
FABH0724E
VSAM DATABASE I/O FAILURE
FABH0725E
VSAM INDEX I/O FAILURE
FABH0727I
DBD BLOCK SIZE IS NOT ACTUAL BLOCK SIZE
FABH0729E
FABHPSFM INTERNAL ERROR
FABH0730I
NO MULTIPLE EXTENTS - USE SELECT KEY OPTION
FABH0734I
INDEX RECORD POINTER IS ZERO
FABH0735I
NO MULTIPLE VOLUMES - USE OTHER SELECT KEY OPTIONS
FABH0736E
GETMAIN FAILURE
FABH0737E
OBTAIN MACRO FAILED FOR DDNAME ddname (RC=xx)
FABH0738E
RDJFCB MACRO FAILED FOR DDNAME ddname (RC=xx)
FABH0740E
FIRST CONTROL STATEMENT ID IS NOT DBD
FABH0741E
DBDNAME IS MISSING OR HAS IMBEDDED BLANKS
FABH0742E
INDEX DBDNAME HAS IMBEDDED BLANKS
FABH0743E
SEQUENCE CHECK OPTION IS NOT Y, N, OR BLANK
FABH0744E
SEQUENCE ERROR PRINT OPTION IS NOT Y, N, OR BLANK
FABH0745E
SEQUENCE ERROR OPTION IS NOT A, B, OR BLANK
FABH0746E
SEQUENCE ERROR THRESHOLD IS NOT NUMERIC
FABH0747E
INVALID OPTION FIELD IS USED
FABH0748E
PSB NAME IS MISSING OR HAS IMBEDDED BLANKS
FABH0749E
PCB NUMBER IS NOT NUMERIC
FABH0750E
OUTPUT FORMAT IS NOT SPECIFIED
FABH0751E
DDNAME IS MISSING OR HAS IMBEDDED BLANKS
FABH0752E
EXIT ROUTING NAME HAS IMBEDDED BLANKS
FABH0753E
SEGMENT MODIFICATION OPTION IS NOT Y, N, OR BLANK
FABH0754E
CONCATENATED KEY OPTION IS NOT Y, N, OR BLANK
FABH0755E
EXIT ROUTINE CONTROL OPTION IS NOT Y, N, OR BLANK
FABH0756E
DBR SKIP OPTION IS NOT Y, N, OR BLANK
FABH0758E
END CONTROL STATEMENT IS MISSING OR OUT OF PLACE
FABH0759E
NO PSB CONTROL STATEMENT IS PRESENT
FABH0760E
SCAN CONTROL DATA SET RECFM IS NOT VB
FABH0761E
FIND FAILED FOR MEMBER xxxxxxxx IN DBDLIB - R15:yy - R0:zz
FABH0765E
INVALID OPTION FIELD IS USED
FABH0766E
INCORRECT CONTROL STATEMENT PLACEMENT
FABH0767E
PARALLEL SCAN NAME IS INVALID
FABH0768E
SCAN CONTROL DATA SET EXPIRATION DATE IS NOT VALID
FABH0769E
NUMBER OF PARALLEL SCANS IS NOT VALID
FABH0770E
DSN SEQUENCE OFFSET IN NOT VALID
FABH0771E
FABHPSFC INTERNAL ERROR
FABH0772E
FABHPSFC INTERNAL ERROR
FABH0773E
PHASE COUNT AND NODE POINT OR HIGH KEY ARE MISMATCH
FABH0774E
LIMIT FIELD IS NOT NUMERIC
FABH0775E
SPECIFIED KEY IS TOO LONG OR ZERO LENGTH
FABH0776E
NODE POINT VALUE TYPE IS NOT R, C, OR X
FABH0777E
INVALID OPTION FIELD IS USED
FABH0778E
POINTER BYPASS OPTION IS NOT 1, 2, OR BLANK
FABH0779E
INCORRECT CONTROL STATEMENT PLACEMENT
FABH0780E
FABHPSFC INTERNAL ERROR
FABH0781E
DBD IS NOT HIDAM OR HDAM
FABH0782E
SEGMENT TABLE BUILD ERROR
FABH0783E
INVALID OPTION FIELD IS USED
FABH0784E
NUMBER OF PARALLEL SCANS IS NOT EQUAL NUMBER OF NPT PLUS ONE
FABH0785E
DSN CHECK OPTION IS NOT Y, N, OR BLANK
FABH0786E
WTO OPTION IS NOT Y, N, OR BLANK
FABH0787E
INCONSISTENT TYPES OF NODE POINT OR HIGH KEY VALUE
FABH0788E
HDAM RELATIVE BLOCK NUMBER IS SPECIFIED BEYOND RAA
FABH0789E
HDAM RELATIVE BLOCK NUMBER IS NOT IN ASCENDING SEQUENCE
FABH0790E
HDAM RELATIVE BLOCK NUMBER IS ZERO OR NEGATIVE
FABH0791E
VALUE TYPE C OR X IS NOT VALID FOR HDAM WITHOUT INDEX
FABH0792E
NODE POINT KEY OR HIGH KEY IS NOT IN ASCENDING SEQUENCE
FABH0793E
BLOCK SIZE IS TOO SMALL FOR CONTROL SCAN PHASES
FABH0794E
SEPARATE HEADER OPTION IS NOT Y, N, OR BLANK
FABH0795E
GETMAIN FAILURE
FABH0796E
NUMBER OF PARALLEL SCANS IS NOT EQUAL TO THE NUMBER OF HKY
FABH0797E
A HIGH KEY CANNOT BE SPECIFIED FOR THIS UNLOAD FORMAT
FABH0800E
FIRST CONTROL STATEMENT ID IS NOT SUM
FABH0801E
DBDNAME IS NOT VALID
FABH0802E
SCAN NAME IS NOT VALID
FABH0803E
SUM OPTION IS NOT STATUS, RERUN, OR FORCE
FABH0804E
HEADER/TRAILER RE-CREATE OPTION IS NOT Y, N, H, T, OR BLANK
FABH0806E
END CONTROL STATEMENT IS MISSING OR OUT OF PLACE
FABH0807E
DBD IS NOT HIDAM OR HDAM
FABH0808E
INVALID SEGMENT WAS FOUND
FABH0810E
HEADER/TRAILER DATA SET RECFM IS NOT VB
FABH0811E
TRAILER DATA SET RECFM IS NOT VB
FABH0812E
FIND FAILED FOR MEMBER xxxxxxxx IN DBDLIB - R15:yy - R0:zz
FABH0813E
END CONTROL STATEMENT IN SCAN CONTROL DATA SET IS NOT FOUND
FABH0814E
SEGMENT NAME IS MISMATCH
FABH0815E
READ JFCB FAILURE
FABH0816E
HEADER/TRAILER DSN IS NOT VALID
FABH0817I
TRAILER PREVIOUSLY CREATED - NO RERUN OPTION SPECIFIED
FABH0818E
FABHPSFS INTERNAL ERROR
FABH0819E
SCAN NAME IS MISMATCH ON SCAN CONTROL DATA SET
FABH0820E
DBD NAME IS MISMATCH ON SCAN CONTROL DATA SET
FABH0821E
SCAN CONTROL DATA SET OPEN FAILURE
FABH0822E
HEADER DATA SET OPEN FAILURE
FABH0823E
TRAILER DATA SET OPEN FAILURE
FABH0824E
GETMAIN FAILURE
FABH0825I
FORCE OPTION REJECTED - A STARTED PHASE INCOMPLETE
FABH0826I
RUN TIME ENVIRONMENT EXIT ROUTINE IS BEING INVOKED, MODULE=xxxxxxxx
FABH0827E
ERROR OCCURRED IN RTEXIT, MODULE=xxxxxxxx, FUNC=yyyy, RC=zz
FABH0828W
NO SEGMENT WAS RETRIEVED
FABH0829W
INCONSISTENT DEC OPTIONS WERE SPECIFIED IN SCAN PHASES
FABH0830E
FIRST PCB IS NOT A VALID HSSR PCB
FABH0831E
AN INVALID STATEMENT IS FOUND IN SYSIN DATA SET
FABH0832E
NON-POSITIVE NUMBER IS SPECIFIED FOR xxxxxxxx CONTROL STATEMENT
FABH0833E
THE OPERAND OF xxxxxxxx CONTROL STATEMENT IS NOT NUMERIC
FABH0834E
OPEN OF SYSUT1 HAS FAILED
FABH0835E
INVALID PARAMETER IS FOUND IN AN LOUT CONTROL STATEMENT
FABH0836E
A NON-NUMERIC VALUE IS SPECIFIED IN HSSRLDEF DATA SET
FABH0837E
A NUMERIC FIELD IS TOO LONG IN HSSRLDEF DATA SET
FABH0838E
LENGTH-DEFINITIONS IN HSSRLDEF ARE NOT IN ASCENDING SEQUENCE
FABH0839I
work_area EXCEEDS 4GB (yyyyyyyyyyyyyyyyyy)
FABH0840E
FABHEXTR FAILED TO OPEN HSSREXTR DATA SET
FABH0841E
INVALID STATEMENT IS FOUND IN HSSREXTR DATA SET
FABH0842E
NUMERIC FIELD IS NOT NUMERIC
FABH0843E
NUMBER OF DB RECORDS TO BE EXTRACTED IS [NOT POSITIVE|TOO LARGE]
FABH0844E
NEITHER EXTR NOR PARTEXTR IS SPECIFIED
FABH0845E
DATABASE IS EMPTY
FABH0846E
TOO MANY DB RECORDS ARE SKIPPED
FABH0847E
xxxxxxxx IS SPECIFIED FOR NON-HALDB
FABH0848E
DUPLICATE STATEMENTS: xxxxxxxx
FABH0849E
MUTUALLY EXCLUSIVE CONTROL STATEMENTS ARE SPECIFIED: xxxxxxxx AND yyyyyyyy
FABH0850E
LOAD FAILED FOR RTEXIT (xxxxxxxx), CC=yyyy, RC=zz
FABH0851E
LOAD FAILED FOR APPL PGM (xxxxxxxx), CC=yyyy, RC=zz
FABH0852E
LOAD FAILED FOR MODULE DFSDBUX1
FABH0853E
IMODULE ERROR (rc) function COMPRESSION EXIT (xxxxxxxx)
FABH0854E
LOAD FAILED FOR FABHRCEX EXIT, CC=xxxx, RC=yy
FABH0855E
COMPRESSION EXIT ROUTINE nnnnnnnn INITIALIZATION ERROR - Uaaaa REASON rrrrrrrr
FABH0856E
LOAD FAILED FOR GEXAPI00
FABH0860E
X'FF' IS SET IN SRCHFLAG BY DFSDBUX1
FABH0861I
DBDGEN REQUIRED FOR DATABASE xxxxxxxx TO SET DATXEXIT INDICATOR
FABH0862E
NON-ZERO RC (xx) RETURNED FROM CONV EXIT
FABH0870E
LOAD FAILED FOR IDCAMS
FABH0871E
LISTCAT FAILED FOR DATA SET dsname (dbdname, partname, ddname), RC=rc
FABH0872I
DATA SET dsname IS NOT CATALOGED (DDN=ddname)
FABH0873I
PARTITION partname OF HALDB dbdname WILL NOT BE PROCESSED
FABH0881I
applname ENDED WITH RC=xx, WHICH MIGHT BE CHANGED BY FABHRCEX EXIT
FABH1000I
DFSISVI0 EXIT IS CALLED BUT FABHURG1 CANNOT BE INVOKED
FABH1001I
DFSISVI0 EXIT IS CALLED AND FABHURG1 IS BEING INVOKED
FABH2001E
INVALID COMPAT= PARAMETER IS SPECIFIED
FABH2002E
INVALID DIAGG= PARAMETER IS SPECIFIED
FABH2003E
INVALID CABSTAT= PARAMETER IS SPECIFIED
FABH2004E
INVALID LSR= PARAMETER IS SPECIFIED
FABH2005E
INVALID URG1DEC= PARAMETER IS SPECIFIED
FABH2006E
INVALID FSUDEC= PARAMETER SPECIFIED
FABH2007E
DUPLICATED FABHTOPT STATEMENTS ARE FOUND
FABH2008E
INVALID BUFDEFAULT= PARAMETER IS SPECIFIED
FABH2009E
INVALID CABDEFAULT= PARAMETER IS SPECIFIED
FABH2010E
INCORRECT APISET= PARAMETER IS SPECIFIED
FABH2011E
INCORRECT PCBLIST= PARAMETER IS SPECIFIED
FABH2012E
INCORRECT URG1BUFNO= PARAMETER IS SPECIFIED
FABH2013E
INCORRECT FSUBUFNO= PARAMETER IS SPECIFIED
FABH2014E
INCORRECT URG1CHKRC= PARAMETER IS SPECIFIED
FABH2015E
INCORRECT COMPAUTH= PARAMETER IS SPECIFIED
FABH2016E
INCORRECT CABBASE_xx= PARAMETER IS SPECIFIED
FABH2017E
INCORRECT ZIIPMODE= PARAMETER IS SPECIFIED

Parent topic: Messages