FPX messages

The following information is about messages and codes that begin with FPX.

FPX0000E
Unable to load message table FPXMSG00.
FPX0001E
Invalid EXIT parameter for IBMTOOL function.
FPX0002E
Specified DD statement not found.
FPX0003E
Error(s) processing dataset.
FPX0004E
Invalid or inconsistent parameters in DCB.
FPX0005E
Authorization failure ENTITY = <imsid.dbname.areaname> SAF RC = aa RACF® RC =bb RACF RSN =dd
FPX0006W
IMS Version 5 SDEP CI encountered, CI was skipped.
FPX0007I
SDEP Logical Begin Time Stamp is: DBRC FORMAT = ccyy.ddd.hh.mm.ss.t STCK format = 16-digit_hexadecimal_STCK_timestamp
FPX0008W
Selected SDEP timestamp is prior to the IMS SDEP Logical Begin Time Stamp: SDEP LBTS: DBRC FORMAT = ccyy.ddd.hh.mm.ss.t STCK FORMAT = 16-digit_hexadecimal_STCK_timestampAFTERTIME: DBRC FORMAT = ccyy.ddd.hh.mm.ss.t STCK FORMAT = 16-digit_hexadecimal_STCK_timestamp
FPX0009E
AIB INQY call failed, AIBRETRN xxxxxxxx AIBREASN xxxxxxxx
FPX0010E
Unsupported IMS release.
FPX0011E
DL/I #FPU call call error, status = SC, module = modname (cont) First RBA of requested CI is rba, number of CIs is nnnn
FPX0012I
FPXTRACT resource cleanup complete.
FPX0013I
Default output file //FPXOFILE detected.
FPX0014I
Input file //FPXCTL detected: Run-level control established.
FPX0015E
No active IMS.
FPX0016E
Terminating errors during parameter analysis. Run aborted.
FPX0017E
Failure to acquire storage.
FPX0018E
Error(s) processing dataset: DCB and DCBE snapped.
FPX0019W
In-doubt SDEP segment(s) skipped. First at RBA nnnnnnnn
FPX0020E
Invalid characters detected in control card.
FPX0021E
Control statement expected. Must start in column 1.
FPX0022E
At least 1 blank after control statement required.
FPX0023E
Continuation not found for previous card.
FPX0024E
Invalid keyword.
FPX0025W
Keyword specification exceeds range. Default value substituted.
FPX0026E
Keyword specification NOT within range.
FPX0027E
Invalid data type in keyword value specification.
FPX0028E
Invalid boolean operator specified.
FPX0029E
Parameter values not properly enclosed by parenthesis.
FPX0030E
Invalid time-stamp specification.
FPX0031E
Invalid control statement.
FPX0032E
No keyword or continuation specified.
FPX0033I
No overriding control cards. All defaults apply.
FPX0034E
Segment xxxxxxxx does not exist.
FPX0035E
Cannot specify both SEG=ALL and SEG=seg_name for the same area / run.
FPX0036W
# of SELECT statements limit exceeded. Card ignored.
FPX0037W
Selection of SEG=ALL in effect. Additional keywords were ignored.
FPX0038E
Not preceded with required keyword.
FPX0039I
Starting Online Fast Path utility processing: AREA name = areaname AREA number = area#
FPX0040E
OUTPUT=UR | TFMT mutually exclusive to SORT=YES.
FPX0041E
OUTPUT=UR | DBT | TFMT mutually exclusive to FIELDS=ss, ll
FPX0042E
Invalid sub-parameter. Should be "KEY,".
FPX0043E
Data comparison length/position exceeds range.
FPX0044E
Sub-parameter of NULL value specified.
FPX0045E
Too many / un-even # of characters.
FPX0046E
# of FIELD= / ANDFIELD= / FIELDS= keywords limit exceeded.
FPX0047E
Comparison data not properly enclosed by apostrophes.
FPX0048E
Invalid KEY specification. DBD does not have key defined.
FPX0049I
(FPXIN, FPXCTL, or DASYSIN input card image)
FPX0050W
OUTPUT data specification is beyond segment length. SEGMENT seg_name RBA rba actual length is seg_length
FPX0051E
Neither default nor explicit output file specification detected. Cannot process this area.
FPX0052W
# of SELECT block limit exceeded. Selection/Extraction specification discarded.
FPX0053W
Invalid keyword for non-SDEP segment. Keyword ignored.
FPX0054I
Area level statistics: statistics data
FPX0055I
Extract process completed successfully.
FPX0056I
Database level statistics: DEDB NAME = dbdname
FPX0057E
Inconsistent EXIT parameter for IBMTOOL function.
FPX0058E
Cannot process more than 1 Area per run with ANALYZE function.
FPX0059E
Invalid record type found by FPXAEPR0.
FPX0060E
Mandatory DD statements not allocated.
FPX0062E
MAXERROR Threshold has been reached.
FPX0063E
Compression exit exit_name not available for segment segment_name
FPX0064W
Randomizer is not loaded. Full area scan will be used.
FPX0065W
Randomizer returned correct area # but invalid RAP number. Full area scan will be used.
FPX0066I
All root segment SELECTs are full key EQ, optimized access using randomizer is in effect.
FPX0067W
Randomizer is AMODE(24). Must be AMODE(31).
FPX0068E
IC requested, but no DD statement for primary IC output found.
FPX0069W
No IC requested. DBRC registration suppressed.
FPX0070E
Required DD statements for run type not found.
FPX0071E
Fatal DBRC error during DBRC [INIT | EOD | ATTACH XRT | LIST.RECON | LIST.DBDS | NOTIFY.IC] call.
FPX0071E
The image copy [of AREA name = areaname] not registered with DBRC due to pointer errors or premature utility termination.
FPX0072W
CI SNAP limit reached, no further CIs will be snapped.
FPX0073W
Area has pointer errors that are not related to orphan SDEP segments.
FPX0074I
Image Copy [using compression_routine] completes. [Record count nnnnnnnn]
FPX0075E
Segment twin chain loop. Fatal Error. R15 at abend= last segment RBA processed.
FPX0076W
Extraction of SDEP segments suppressed: Output is in UNLOAD/RELOAD format.
FPX0077E
IC1OUTDD and IC2OUTDD refer to the same DD name.
FPX0078E
Not all segments in hierarchic path selected with UNLOAD/RELOAD format.
FPX0079W
STARTUOW and/or STOPUOW utility statement detected: Request for IC ignored.
FPX0080E
The image copy data set of AREA name = areaname contains pointer errors.
FPX0081E
New IOVF size is greater than area size.
FPX0082E
SDEP portion of the area will decrease by xxxxxxx
FPX0083I
SDEP portion of the area will decrease by xxxxxxx
FPX0084E
Changes that alter RAP portion of area not permitted.
FPX0085E
IOVF expansion requires IOVF size to be increased via DBD source.
FPX0086E
Area is RSR covered.
FPX0087E
VSO Area not allowed.
FPX0088E
IOVF and SDEP keywords cannot both be specified.
FPX0089E
EXIT EXTEND statement must specify IOVF on this restart.
FPX0090I
OAE has been restarted from a prior failure.
FPX0091E
OAE restart not processed. Follow the RESTART procedure in the OAE User's Guide.
FPX0092E
OAE Restart is required. Include RESTART parameter on the EXIT EXTEND statement.
FPX0093E
Either IOVF or SDEP keyword must be specified.
FPX0094E
Active SDEP segments in the CSC portion of area.
FPX0095E
Failure reading data set information from catalog. Reason code: xxx Return code: yyy Dataset: data set name
FPX0096E
INVALID FPXIN keyword: xxxxxxxx
FPX0096E
DUPLICATE FPXIN keyword: xxxxxxxx
FPX0096E
FPXIN keyword parameter error: xxxxxxxxxx
FPX0097W
Utility completed successfully in TEST mode with no database updates.
FPX0098W
Statistics may be incomplete due to processing errors.
FPX0099I
Online Area Extender statistics: statistics data
FPX0100E
The DBD name specified in the PARM does not match the member indicated by the ACBLIB DD statement.
FPX0101E
Unable to open the ACBLIB DD statement.
FPX0103E
CREATE utility did not complete successfully. See accompanying DFS messages for additional information.
FPX0104E
Changes that alter CIs per UOW not permitted.
FPX0105E
Changes that alter DOVF CIs per UOW not permitted.
FPX0106E
Changes that alter CI size not permitted.
FPX0107E
SDEPHIER keyword is specified with mutually exclusive keyword value or against no SDEP defined DB.
FPX0109E
SDEPHIER=YES is not supported by current IMS APAR level.
FPX0110I
CI formatted by Create utility was encountered, CI was skipped. RBA of CI: nnnnnnnn
FPX0111E
Incorrect keyword for SDEP segment.
FPX0112E
Selection of DEPENDENTS in effect. No optional keyword permitted.
FPX0113E
Incorrect DEPENDENTS/BOTH specification. This segment has no dependent segment.
FPX0114I
SDEP segment ignored for SORT=YES option: AREA NAME=areaname AREA NUMBER=area#
FPX0115W
No SDEP segments found-SDEP processing bypassed for area.
FPX0116W
Area may have orphan SDEP segments.
FPX0117I
Return code user exit FPXRCEX0 is called.
FPX0118I
Return code user exit FPXRCEX0 completed. Original RC = aa, returned RC = bb
FPX0119I
Return code user exit FPXRCEX0 is not called because of message table GETMAIN failure.
FPX0120W
-Warning only:
FPX0120W
Segment checksum error in SDEP portion.
FPX0120W
Segment code: 02 Segment name: xxxxxxxx Checksum value: xxxxxxxxxxxxxxxx
FPX0121I
OAE replaced ROOT= parameter from (aaaaa,bbbbb) to (ccccc,fffff)
FPX0122W
Incorrect OLRECL xxxxx specification. Default value xxxxx substituted.
FPX0123E
module is not loaded. Abend code: Sxxxx reason code: yyyy.
FPX0124I
(One of the texts listed in Explanation)
FPX0125I
OAE created a temporary ADS. DDNAME ddname, DSNAME dsname
FPX0125I
OAE deleted a temporary ADS. DDNAME ddname, DSNAME dsname
FPX0126I
An ADS was registered with DBRC. DDNAME ddname, DSNAME dsname
FPX0126I
An ADS was deleted with DBRC. DDNAME ddname, DSNAME dsname
FPX0127E
DUMMY or NULLFILE is specified for ddname DD statement.
FPX0128I
parameter parameter of FPXIN DD is ignored.
FPX0129I
OAE deleted and created an original ADS by extension.
FPX0130E
Dynamic allocation failed for(cont) DDNAME: ddname, DSNAME: dsname(cont) RC: rc, RSN: S99ERROR(eeee), S99INFO(iiii), S99ERSN(rrrr).
FPX0131I
Status of original ADS was changed into AVAIL. DDNAME: ddname, AREA: areaname, DBDNAME: dbdname
FPX0132I
LISTCAT information of the area data set before extending: (cont) - AREA: areaname (cont) - ADSDD: ddname ADSDS: dsname
FPX0133E
One or both of ddname specified by DDNAME parameter and dsname specified by DSNAME parameter are already regist (cont) ered with DBRC. (cont) - AREA: areaname (cont) - ADSDDN(registered): ddname (cont) - ADSDSN(registered): dsname
FPX0134E
Either IOVF_UOW, IOVF_ROOT, or SDEP_CI keyword must be specified.
FPX0135E
The number of [VOLUME | VOLUME_EXT] keyword limit exceeded.
FPX0136W
The OAE restart process extended the temporary ADS. It did not copy the temporary ADS back to the original ADS.
FPX0137I
OAE RESTART process determines the original area data set with the DBRC available ADS. (cont) - AREA: areaname (cont) - AVAIL ADS (cont) - ADSDD: ddname ADSDS: dsname (cont) - ADSDD: ddname ADSDS: dsname : (cont) - UNAVAIL ADS(cont) - ADSDD: ddname ADSDS: dsname :
FPX0138E
Incorrect RC received from Access method service process called by FPXBTOA0.
FPX0139E
Fatal DBRC error occurred during OAE.
FPX0140E
Mandatory keyword keyword is not specified in FPXIN DD.
FPX0141E
Extended ADS size specified with IOVF_UOW, IOVF_ROOT, or SDEP_CI keyword exceeds the maximum ADS size.
FPX0142E
AREA=ALL is not allowed for xxxxxxxx control statement in FPXIN DD.
FPX0143E
No extension specified with SDEPCI=0 and no IOVF_ROOT in FPXIN DD.
FPX0144E
FPXIN command must be specified at first except comment statements.
FPX0145E
FPXIN DD and SYSIN DD are mutually exclusive.
FPX0146I
DEDB UTILITY xxxxxxxx STARTED, DB dbname AREA areaname
FPX0147E
INVALID VALIDATION CALL, CODE=xx
FPX0148E
UTILITY STOPPED PRIOR TO COMPLETION DUE TO STOP REGION OR SYSTEM TERMINATION COMMAND
FPX0149E
CREATE UTILITY FAILED DUE TO IN-DOUBT SEGMENT IN AREA DATA SET
FPX0150E
VALIDATION CALL FAILED FOR AREA=areaname DD=ddname CODE=xx
FPX0151E
Incorrect FPXBINTP file was specified. incorrect interface item
FPX0152E
AREA areaname DOES NOT EXIST
FPX0153E
OTHER UTILITY ACTIVE IN AREA areaname
FPX0154E
CHANGE OF UTILITY FOR THIS AREA
FPX0155E
OPEN FAILED FOR AREA=areaname
FPX0156E
INVALID DISCONNECT CALL
FPX0157E
WRONG PROGRAM NAME
FPX0158E
ROOT SEGMENT HAS NO SEQUENTIAL DEPENDENT SEGMENTS
FPX0159E
XX STATUS FROM I/O PROCESS IN AREA
FPX0160E
GET AREA LOCK FAILED, AREA=areaname
FPX0161E
GETMAIN FAILED, AREA=areaname
FPX0162E
FAILED TO CONNECT THE AREA
FPX0163E
UNABLE TO OBTAIN AUTHORIZATION FOR DATA BASE=xxxxxxxx AREA=areaname. REASON CODE=xx
FPX0164E
DMAC SYNCHRONIZATION FAILED FOR AREA=areaname
FPX0165E
UTILITY=xxxxxxxx TERMINATED BECAUSE AREA=areaname STOPPED
FPX0165E
UTILITY=xxxxxxxx SKIPPED PROCESSING FOR AREA=areaname BECAUSE AREA IS STOPPED
FPX0166E
AREA=xxxxxxxx NOT REGISTERED IN RECON D/S
FPX0167E
The name of the IMS Tools KB server XCF group must be specified on the ITKBSRVR keyword when [SENSOR=YES | ITKBDATA=UTILHIST] is specified.
FPX0168E
[Original | Temporary] ADS could not be [created | deleted]. DDNAME: adsdd DSNAME: dsname
FPX0169E
[Original | Temporary] ADS DDNAME: ddname DSNAME: dsname could not be stopped.
FPX0170E
Maximum number of area data sets has been reached in DBRC. AREA=areaname
FPX0171W
-> Warning:Possible loop in segment twin chain.Source SC seg-code Name seg-name RBA x'xxxxxxxx'Target SC seg-code Name seg-name RBA x'xxxxxxxx'Root SC seg-code Name seg-name RBA x'xxxxxxxx'Root key value:xxxxxxxxxxxxMaximum 255 bytes of contents of source segment: xxxxxxxxxxxx
FPX0172E
Failed to load module: xxxxxxxx (Sccc-rr).
FPX0173I
process_name process started.
FPX0174I
proces_name process ended with RC=00. (Elapsed Time: hh:mm:ss.tt)
FPX0175E
process_name process ended with RC=nn. (Elapsed Time: hh:mm:ss.tt)
FPX0176E
The FPO utility could not process because no areas were available.
FPX0177W
Area xxxxxxxx is stopped. Process for the area will be bypassed.
FPX0178E
[ICEXTEND | ICEXTEND=YES] is not supported by the current IMS APAR level.
FPX0181I
The process_name process for AREA name = areaname completed successfully.
FPX0182W
The process_name process for AREA name = areaname ended with warnings.
FPX0183E
The process_name process for AREA name = areaname ended with errors.
FPX0184E
process_name process ended abnormally.
FPX0185W
process_name process ended with RC=nn. (Elapsed Time: hh:mm:ss.tt)
FPX0186E
Number of total CIs per UOW exceeded the maximum value nnnn.
FPX0187I
OAE interface parameter file was generated as follows:interface data
FPX0188E
Load module library is not APF-authorized.
FPX0189E
FPXIN control statement error. No keywords specifiedUnknown keywordInvalid xxxxxxxx= control statement xxxxxxxx= control statement previously processed
FPX0190E
TOSI API failed. FUNCTION: xxxxxxxxx, RC: rc, RSN: rsn
FPX0191E
TOITIME time over. REQUEST command=xxxxxxxx
FPX0192I
AREA stopped. AREA: areaname, IMSID: imsid
FPX0193I
Original ADS deleted. DDNAME: ddname, DSNAME: dsname
FPX0194I
Temporary ADS renamed as original ADS (RENAME target).DDNAME: ddnameCLUSTER NAME: cluster nameDATA NAME: data name
FPX0195I
The following IMS command issued:content of the command
FPX0197I
Active IMS list as follows:imsid:
FPX0198I
/RMxxxxxx command completed.
FPX0199E
/RMxxxxxx command failed with RC=xx
FPX0200I
Temporary ADS in RECON is deleted. DDNAME: ddname, AREA: areaname, DBDNAME: dbdname
FPX0201E
SORT ended with internal error. SORT may issue the message to SYSOUT DD. SORT return code is: nnnn
FPX0202I
Site default options are specified.
FPX0203I
xxx processing options in effect:
FPX0204E
PDS processing failed for xxxxxxxx: FUNC=yyyyyy, RC=nnnn, RSN=nnnn.
FPX0205E
Site default options cannot be specified for keywords of SELECT and OUTPUT control statements.
FPX0206I
Global level site default values have been read from the following member: PROCLIB: dsn MEMBER: member name
FPX0207I
xxxx-level site default values have been read from the following member: yyyPARMLIB: dsn MEMBER: mbr_name
FPX0208I
Keywords are specified as follows:
FPX0209I
See message FPX0049I for the following control statements:
FPX0210I
Parameter analysis for the global site default options started ...
FPX0211I
Parameter analysis for the AREA/DB level site default options started ...
FPX0212I
Parameter analysis for control statements specified in the JCL stream started ...
FPX0213E
DYNALLOC failed for DSNAME: dsname, MVS RET. RSN codes are: rc + rsn
FPX0214I
Processing ends because of PCHKONLY=YES.
FPX0215E
Length error for xxxxxxxxxxx detected in FPXCFG00.
FPX0216E
Incorrect specification detected in FPXCFG00.
FPX0217I
Starting keyword analysis: AREA name = areaname, AREA number=area#
FPX0218I
Completed keyword analysis: AREA name = areaname, AREA number=area#
FPX0219I
AREA level site default values are not read because of run-level control.
FPX0220E
keyword1=value1 and keyword2=value2 are mutually exclusive.
FPX0221E
AREA must be specified in FPXIN.
FPX0222E
IC was not requested, but IC1OUTDD or IC2OUTDD was specified.
FPX0223E
PDS processing failed for site default.
FPX0224E
Site default options cannot be specified for the keyword keyword.
FPX0225E
Global site default options exceed nnnn lines.
FPX0226E
Area/DB site default options exceed nnnn lines.
FPX0228E
Errors were detected in XXXXXXXX parameter analysis for global site default.
FPX0229E
Errors were detected in XXXXXXXX parameter analysis for area or DB site default.
FPX0230E
Errors were detected in XXXXXXXX parameter analysis for FPXIN JCL stream.
FPX0231E
A syntax error was detected in the global site default.
FPX0232E
A syntax error was detected in area or DB site default.
FPX0233E
A syntax error was detected in FPXIN JCL stream.
FPX0234I
The following control statements were specified in //FPXIN:
FPX0235E
The site default configuration in FPXCFG00 must start in column 1.
FPX0236E
Duplicate value: xxxxxxxx is specified in the xxxxxxxx keyword.
FPX0237E
EXTRACT is not supported by the current IMS APAR level.
FPX0238E
Duplicate specification: ALL and area names.
FPX0239W
SDEP_ORPHAN_MSGLVL is ignored because SDEP=NO was specified.
FPX0240E
The first non-comment line of a site default member must start with the xxxxxxxx command
FPX0241E
The error is at the position marked with '*' or in the preceding keyword parameter.
FPX0242E
The following comment line is specified in parentheses.
FPX0243E
The right parenthesis that corresponds to the left parenthesis is not found.
FPX0244E
A comma or a blank is expected at the position marked with '*'.
FPX0245E
The value for a keyword parameter must immediately follow the equal sign.
FPX0246E
A value, not null, must be specified within the parentheses.
FPX0247I
ERRORACT=ABEND will not be effective for the reorganization step.
FPX0248E
Incorrect duplicate keyword specification.
FPX0249E
AREA=ALL is not supported by the current IMS APAR level.
FPX0250I
The following control statements were specified in //FPXOPTS:
FPX0251I
Suppressed messages:
FPX0252E
Command or keyword xxxxxxxx is missing for FPXOPTS DD.
FPX0253E
Duplicate specification is not allowed for FPXOPTS DD.
FPX0254E
Incorrect keyword was specified for FPXOPTS DD.
FPX0255E
Keyword specification was NOT within range for FPXOPTS DD.
FPX0256E
Incorrect data type for keyword value specification was detected in FPXOPTS DD.
FPX0257E
A syntax error was detected in FPXOPTS DD.
FPX0258E
The operating mode specified is not supported in multiple area processing.
FPX0259I
PROC_AFT_ERROR=NEXTAREA is ignored because only one area is specified.
FPX0260E
Image copy output function cannot be used. - IMS HP Image Copy module: modulename is not found. - IMS HP Image Copy version check module ended with error: nn - The PTF level of the IMS HP Image Copy module is not high enough. - Product information: product_information
FPX0261W
An error was detected in the IMS HP Image Copy processing. - Area name: areaname, Area number: area_number, Function: function, Return code: return_code, Reason code: reason_code.
FPX0262W
Failed to take an image copy of this area. Processing continues with the next area.
FPX0263W
Processing continues, but no image copy is taken in the subsequent processing because image copy processing has failed.
FPX0264E
Processing ended because errors were detected in ICEIN DD of IMS HP Image Copy.
FPX0265I
The image copy data set generated within this job cannot be used for database recovery. - ICNOTIFY=NO is specified - Area is not defined in RECON: DBDNAME=dbdname AREANAME=areaname
FPX0266W
Concurrent image copy of a non-recoverable database is not supported.
FPX0267W
RECON access failed: FUNC=function RC=return_code RSN=reason_code
FPX0269E
Image Copy dataset is incomplete.
FPX0270E
Incorrect UOW range specified: STARTUOW=nnnnn, STOPUOW=mmmmm
FPX0271E
Mandatory keyword keyword is not specified in statement name statement.
FPX0272E
GLOBAL command must be specified as a first command.
FPX0273I
The ITKBLOAD parameter was ignored because no server name was specified.
FPX0274I
SORT=YES was internally changed to SORT=NO because OUTPUT=USER was specified.
FPX0275E
The built-in variable ROOT_KEY or SEGMENT_CKEY is not valid for SDEP segments when SDEPHIER=NO is specified.
FPX0276E
Image copy dataset (ddname DD) cannot be defined as SYSOUT when ICNOTIFY=YES is specified.
FPX0277I
The REPORT control statement is ignored.
FPX0278I
FULLSTEP=YES must be specified in order to generate the analysis reports.
FPX0279I
DUMMY or NULLFILE or SYSOUT is specified for the ddname DD statement.
FPX0280W
Due to errors, no image copy data set was extended.
FPX0281W
The output data set for the extended image copy is not specified. Specify the ddname DD statement.
FPX0282W
The image copy record is not found in RECON.
FPX0283W
The image copy data set is incorrect. [IC1 | IC2] DSN= data_set_name- The format is incorrect. - The DBD name is incorrect. DBD name: dbd_name - The area name is incorrect. AREA name: area_name - The CI size is incorrect. CI size: xxxxx - An unsupported compression routine is used. Routine: routine_name - The timestamps that are recorded in RECON and image copy header record do not match. (cont) Primary image copy data set: (cont) RECON yyyy/ddd HH:MM:DD thmiju +x (cont) IC Header yyyy/ddd HH:MM:DD thmiju +x (cont) Secondary image copy data set: (cont) RECON yyyy/ddd HH:MM:DD thmiju +x (cont) IC Header yyyy/ddd HH:MM:DD thmiju +x
FPX0283W
The image copy data set is incorrect. - The numbers of records are different. (cont) IC1 DSN= data_set_name (x,xxx,xxx,xxx) (cont) IC2 DSN= data_set_name (x,xxx,xxx,xxx)
FPX0284I
Image copy [IC1 | IC2] is not registered in RECON. The following specification is ignored: (cont) DDN=FPXBIC0x DSN= data_set_name
FPX0285W
The following error occurred while extending the image copy data set: (cont) - The image copy data set that is registered in RECON does not exist. [IC1 | IC2] DSN= data_set_name (cont) - Function = typ DD name = ddname MVS RET and RSN codes are: rc + rsn (cont) - I/O error. [IC1 | IC2 | FPXBIC01 | FPXBIC02] DSN= data_set_name
FPX0286I
OAE invalidated the entry for the following image copy data set in RECON: (cont) [IC1 | IC2] DSN= data_set_name
FPX0287W
Create an image copy of the extended DEDB area immediately.
FPX0288I
OAE extended the image copy data set.
FPX0289I
Create an image copy of the extended DEDB area immediately.
FPX0291W
The data set names on the FPXBIC01 DD, the FPXBIC02 DD, the IC1 and the IC2 fields in RECON must be different. (cont) DSN= data_set_name
FPX0292E
OAE restart is not required. Remove the RESTART parameter from the EXTEND statement.
FPX0293I
The process_name process ended.
FPX0295W
The function function of compression exit routine exit-routine-name failed with RC= nn.
FPX0296W
The image copy that is registered in RECON cannot be supported.
FPX0297W
The image copy data set was extended, but the DBRC RECON data sets were not updated.
FPX0298W
ICEXTEND keyword is ignored because RESTART keyword is specified.
FPX0299E
The process_name process ended with errors.
FPX0300I
Area Sensor process started.
FPX0301I
Area Sensor process ended normally. (Elapsed Time: hh:mm:ss.tt)
FPX0302E
Area Sensor process ended with errors
FPX0303E
A serious error was detected in the CI at RBA: xxxxxxxx during the Area Sensor process.
FPX0308I
UOW xxxxxxxxxx process started.
FPX0309I
UOW xxxxxxxxxx process ended normally.(Elapsed Time: hh:mm:ss.tt)
FPX0310E
UOW Ranking process ended with an error.
FPX0311E
Name/Token service xxxxxxx failed. Name: name RC=nn.
FPX0312W
UOW Ranking process ended normally, but the number of UOWs to be reorganized is zero.
FPX0313I
Reorganization process starts.
FPX0314I
Reorg was attempted for UOW nnnnnnn (resulttxt); No. of free IOVF CIs after reorg: xxxxxxx (yyy% free)
FPX0315I
Reorganization attempted from UOW nnnnnnn to UOW mmmmmmm (Number of UOWs: xxxxxxx).
FPX0316I
(Several lines that indicate reorganization statistics)
FPX0317E
Reorganization failed in UOW xxxxxxx; reason: cc, reason_text
FPX0318E
Reorganization ended at UOW xxxxxxx; reason: reason_text
FPX0319E
Unexpected status code: xx, reason_text
FPX0320W
Previous reorg process failed - reorg will be restarted from the UOW that failed in the last reorg.
FPX0321I
Reorganization process ended with RC=ccc.(Elapsed Time: hh:mm:ss.tt)
FPX0322E
Failure count has exceeded the MAXFAILS number.
FPX0323I
The online pointer scan process for AREA name = areaname started.
FPX0324I
The online pointer scan process for AREA name = areaname completed successfully. (Elapsed Time: hh:mm:ss.tt)
FPX0325E
The online pointer scan process for AREA name = areaname ended with errors. (Elapsed Time: hh:mm:ss.tt)
FPX0326W
The online pointer scan process for AREA name = areaname ended with warnings. (Elapsed Time: hh:mm:ss.tt)
FPX0327E
The number of pointer errors that are detected in AREA name = areaname is nnn.
FPX0328E
OAE process stopped due to ICERR_CONT=NO option.
FPX0329W
The process_name process ended with warnings.
FPX0330I
LISTCAT information of the temporary area data set after extending: (cont) - AREA: areaname (cont) - ADSDD: ddname ADSDS: dsname
FPX0331I
LISTCAT information of the area data set after extending: (cont) - AREA: areaname (cont) - ADSDD: ddname ADSDS: dsname
FPX0332I
The main process completed for all the specified areas. Subordinate processes are still in progress.
FPX0334E
Data set name error.
FPX0335E
Specify a mask variable for the TARDSNMASK keyword parameter.
FPX0337I
OLRECL=SEGMENT is ignored because OUTPUT= parameter was specified.
FPX0338I
statement control statement is ignored because keyword=value is specified.
FPX0339E
Incorrect RBA value in CI at RBA xxxxxxxx. (cont) RBA value: yyyyyyyy Offset: zzzz
FPX0340E
[OPEN | GET] failed for VSAM data set. (cont) - DSNAME: dsname(cont) - Return code is rc (hex_rc), [ACB error flag code | RPL feedback area] is rsn (hex_rsn).
FPX0341E
TRKCALC macro failed. RC=rc
FPX0342E
The maximum number of volumes for the [original | temporary] ADS is 1, but the size of the extended ADS exceeds the total number of CIs available for the device.
FPX0343E
The VOLUME keyword must be supplied in a non-SMS environment.
FPX0344E
The VOLUME_EXT keyword is not supported when the original ADS is a MADS.
FPX0345E
Specify a volume with sufficient space to contain the temporary ADS.
FPX0346I
64 bit storage used for utility private buffers.
FPX0347I
FPBP64U=YES is not supported by the current IMS APAR level.
FPX0348I
The following control statements were specified in //INDD:
FPX0349E
INDD DD card error: error_message_text ROW: nnnn - error_card_image
FPX0350I
ERRACTN=parm was internally changed to ERRACTN=TERM.
FPX0351E
BLDL failed for dynamic allocation member: member_name
FPX0352E
DFSMDA member member_name was not found.
FPX0353E
Incorrect dynamic allocation member: member_name
FPX0354E
Dynamic allocation failed for DDNAME: ddname, DSNAME: dsname, RC= code, RSN=eeeeiiii
FPX0356I
SDEP segment data is not extracted because of OUTPUT, SORT, and SDEPHIER keyword specifications.
FPX0357W
SDEP segment data is not extracted because of OUTPUT, SORT, and SDEPHIER keyword specifications.
FPX0358I
AREA areaname is flagged as empty.
FPX0359I
Found SDEP pointers that point to the IOVF portion.
FPX0360I
The number of informational messages in the Online Pointer Scan report exceeded the limit.
FPX0361E
Compression exit exit_name returned an error for segment segment_name at RBA X'xxxxxxxx'Abend code = Unnnn Reason code = X'xxxxxxxx'
FPX0362I
The DBLKF1SDEP_FULL flag is not turned on. AREA: areaname, RBA OF CI: rba, IMSID: ims_id
FPX0363W
The DBLKF1SDEP_FULL flag is not turned on. AREA: areaname, RBA OF CI: rba, IMSID: ims_id
FPX0400E
The number of members in the XCF group exceeded the maximum.
FPX0401W
Error in call to randomizer routine rmodnameFUNCTION: function_name. Full area scan will be used. (cont) RETURN CODE: xxx REASON CODE: X'xxxxxxxx'
FPX0402W
The RBA of the current overflow CI in the first DOVF CI is null. RBA: rba, UOW#: nnnnn
FPX1001E
Invalid function code function_code passed to FPXGXDR.
FPX1002E
GET call prior to INI call to FPXGXDR.
FPX1003E
Invalid suffix on function_code call to FPXGXDR (SUFFIX = suffix).
FPX1004W
Duplicate INIT or INIx call to FPXGXDR.
FPX1005E
Unable to open file DDname
FPX1006E
Unrecognized file format for file DDname
FPX1007W
EOJ or EOJx call without prior INIT or INIx call to FPXGXDR.
FPX1008I
Statistics for DDNAME DDNAME
FPX1010E
Parameter 2 or 3 missing on GET or GETx call to FPXGXDR.
FPX1011E
End of file encountered during call processing before end of control records.

Parent topic: Messages