Process Summary report

The Process Summary report summarizes the result of processing for each area.

This report is generated by the UNLOAD command and the RELOAD command.

The following figures are examples of the Process Summary report.

Figure 1. Process Summary report generated by the UNLOAD command

IMS HPFP UTILITIES - FPA UNLOAD                           "Process Summary Report"                                     PAGE:       1
5698-FPP V2R1                                                                                                    2021-11-22 18:55:26


                        +---------------------------------------------------------------------------------+
                        | CHECKPOINT MODE                                                                 |
                        |  # indicates the area that is to be reprocessed in the next restart processing  |
                        +---------------------------------------------------------------------------------+
                        | UL: UNLOAD   IC: HPIC   IC REG: NOTIFY.IC                                       |
                        +---------------------------------------------------------------------------------+

  DBDNAME  AREANAME AREA NO   UL    IC IC   STATUS (If not blank, see messages in HFPPRINT/ICEPRINT.)
                              RC    RC REG
  -------- -------- -------   -- -- -- ---  ---------------------------------------------------------------
  DEDBJN22 DB22AR1        1   00    00 REG
  DEDBJN22 DB22AR2        2   00    00 REG
  DEDBJN22#DB22AR3        3   08            Processing ended with errors.
  DEDBJN22#DB22AR4        4   08            Processing ended with errors.
  DEDBJN22#DB22AR5        5   00    08      Processing ended with errors.
  DEDBJN22#DB22AR6        6   00    08      Processing ended with errors.
  DEDBJN22#DB22AR7        7   08            Processing ended with errors.
  DEDBJN22 DB22AR8        8   00    00 REG
  DEDBJN22 DB22AR9        9   00    00 REG

Figure 2. Process Summary report generated by the RELOAD command

IMS HPFP UTILITIES - FPA RELOAD                           "Process Summary Report"                                     PAGE:       1
5698-FPP V2R1                                                                                                    2021-07-13 19:03:00
                        +---------------------------------------------------------------------------------+              
                        | RESTART MODE ( 1ST RUN IN RESTART MODE)                                         |              
                        |  # indicates the area that is to be reprocessed in the next restart processing  |              
                        +---------------------------------------------------------------------------------+              
                        | RL: RELOAD   AN:ANALYZE   IC: HPIC   IC REG: NOTIFY.IC                          |              
                        +---------------------------------------------------------------------------------+              
  DBDNAME  AREANAME AREA NO   RL AN IC IC   STATUS (If not blank, see messages in HFPPRINT/ICEPRINT.)                    
                              RC RC RC REG                                                                               
  -------- -------- -------   -- -- -- ---  ---------------------------------------------------------------              
  DEDBJN23#DB23AR1        1   00 00 08      Processing ended with errors.                                                
  DEDBJN23 DB23AR2        2   00 00 00 REG                                                                               
  DEDBJN23#DB23AR3        3   00 00 08      Processing ended with errors.                                                
  DEDBJN23 DB23AR4        4   00 00 00 REG

DBDNAME

Shows the name of the database.

AREANAME

Shows the name of the area. The area names are displayed in the order that they were defined.

When RESTART=NO is specified, or RESTART=YES is specified and the job runs in checkpoint mode, all the areas that are specified for the IAREA keyword of the UNLOAD command or for the OAREA keyword of the RELOAD command are shown.
When RESTART=YES is specified and the job runs in restart mode, only the areas that are reprocessed in the restart processing are shown.
When RESTART=YES is specified, a number sign (#) at the beginning of AREANAME indicates the area that is to be reprocessed in the next restart processing.

AREA NO

Shows the area number.

UL RC

Shows the return code of the unload processing for the area. If the area was unloaded successfully in the previous run, NA is shown.

RL RC

Shows the return code of the reload processing for the area. If the area was reloaded successfully in the previous run, NA is shown.

AN RC

Shows the return code of the analyze processing for the area. If the area was analyzed successfully in the previous run (return code is 8 or lower), NA is shown.

IC RC

Shows the return code of the image copy processing for the area. If the image copies were taken successfully in the previous run, NA is shown.

IC REG

Shows whether the image copies for the area were successfully registered to DBRC RECON.

REG: The image copies were successfully registered to DBRC.
BYP: Registration to DBRC was bypassed because of errors.

STATUS

Shows the processing result for each area.

If FPA function ended successfully without errors, this column is blank. Otherwise, one of the following messages is displayed in this column:

Processing ended with warnings.

This message indicates that the processing ended with return code of 4.

Processing ended with errors.

This message indicates that the processing ended with return code of 8.

Processing did not complete.

This message indicates that the processing for the area did not complete because the processing ended abnormally.

Processing was skipped.

This message indicates that the processing for this area was skipped due to one of the following situations:

A different area, which has been unloaded to the same unload data set, has an error.
All input tasks ended abnormally. No more input tasks to process.
The NOTIFY.IC commands for the precedent areas were issued, but ended with an error.
Another image copy, which has been written to the same stack, has an error.

For details about these messages, see the HFPSYSIN data set, and when ICOUT=YES is specified, also see the ICEPRINT data set.

The following information is also displayed in this report when RESTART=YES is specified:

Processing mode (whether the job was run in checkpoint mode or in restart mode). When the job was run in restart mode, the count of the restart processing is also displayed.
The explanation for the number sign (#) indicator. The # character is shown at the beginning of AREANAME to indicate the area to be reprocessed in the next restart processing.