Work with channel status on IBM® i

You can work with the channel status from the Work with Channel Status panel.

Use the WRKMQMCHST command to display the first of a set of panels showing the status of your channels. You can view the status panels in sequence when you select Change-view (F11).

Alternatively, selecting option 8 (Work with Status) from the Work with MQM Channels panel also displays the first status panel.

Figure 1. First of the set of channel status panels


MQSeries Work with Channel Status

Type options, press Enter.
5=Display  13=Ping  14=Start  15=End  16=Reset  17=Resolve


Opt Name         Connection      Indoubt   Last Seq
CARTS_CORSAIR_CHAN  GBIBMIYA.WINSDOA1    NO        1
CHLNIC        9.20.2.213       NO        3
FV.CHANNEL.PETER2   9.20.2.213       NO      6225
JST.1.2        9.20.2.201       NO       28
MP_MUST_TO_CORS    9.20.2.213       NO       100
MUSTANG.TO.CORSAIR  GBIBMIYA.WINSDOA1    NO       10
MP_CORS_TO_MUST    9.20.2.213       NO       101
JST.2.3        9.5.7.126        NO       32
PF_WINSDOA1_LU62   GBIBMIYA.IYA80020    NO       54
PF_WINSDOA1_LU62   GBIBMIYA.WINSDOA1    NO       500
ST.JCW.EXIT.2TO1.CHL 9.20.2.213       NO       216

Bottom
Parameters or command
===>
F3=Exit  F4=Prompt  F5=Refresh  F6=Create  F9=Retrieve  F11=Change view
F12=Cancel  F21=Print

The options available in the Work with Channel Status panel are:

Menu option	Description
5=Display	Displays the channel settings.
13=Ping	Initiates a Ping action, where appropriate.
14=Start	Starts the channel.
15=End	Stops the channel.
16=Reset	Resets the channel sequence number.
17=Resolve	Resolves an in-doubt channel situation, manually.