Create Device Desc (Printer) (CRTDEVPRT)
Where allowed to run: All environments (*ALL) Threadsafe: No |
Parameters Examples Error messages |
The Create Device Description (Printer) (CRTDEVPRT) command creates a device description for a printer device.
Notes:
- Parameters no longer supported as of V7R4M0: MAXLENRU
Restriction: You must have input/output system configuration (*IOSYSCFG) special authority to use this command.
Top |
Parameters
Keyword | Description | Choices | Notes |
---|---|---|---|
DEVD | Device description | Name | Required, Key, Positional 1 |
DEVCLS | Device class | *LCL, *RMT, *VRT, *SNPT, *LAN | Required, Key, Positional 2 |
TYPE | Device type | 3287, 3812, 4019, 4201, 4202, 4207, 4208, 4214, 4216, 4224, 4234, 4245, 4247, 5204, 5219, 5224, 5225, 5256, 5262, 5553, 5583, 6252, 6404, 6408, 6412, *IPDS | Required, Key, Positional 3 |
MODEL | Device model | 0, 1, 2, 3, 4, 10, 13, 200, 301, 302, 3E3, *ASCII, *POST, AS8, B01, CTA, D1, D2, T08, T12, T20, *IPDS, *LU3, 0000, 0001, 0002, 0003, 0004, 0010, 0013, 0200, 0301, 0302 | Required, Key, Positional 4 |
LANATTACH | LAN attachment | *LEXLINK, *IP, *USRDFN | Optional |
SWTLINLST | Switched line list | Values (up to 8 repetitions): Name | Optional |
ADPTADR | LAN remote adapter address | 000000000001-FFFFFFFFFFFE | Optional |
ADPTTYPE | Adapter type | *INTERNAL, *EXTERNAL | Optional |
ADPTCNNTYP | Adapter connection type | *PARALLEL, *SERIAL | Optional |
EMLDEV | Emulated twinaxial device | 3812, 5219, 5224, 5256 | Optional |
AFP | Advanced function printing | *NO, *YES | Optional |
AFPATTACH | AFP attachment | *WSC, *APPC | Optional |
PORT | Port number | 0-65535 | Optional |
SWTSET | Switch setting | 0, 1, 2, 3, 4, 5, 6 | Optional |
LOCADR | Local location address | 00-FE | Optional |
AUXPRT | Auxiliary printer | *YES, *NO | Optional |
EMLASCII | Emulating ASCII device | *NO, *YES | Optional |
ATTACH | Physical attachment | *DIRECT, *PTT, *MODEM, *WIRE3, *WIRE4, *EIA422 | Optional |
ONLINE | Online at IPL | *YES, *NO | Optional |
CTL | Attached controller | Name | Optional |
LNGTYPE | Language type | *SYSVAL, AGB, AGI, ALI, BGB, BLI, BRB, CAB, CAI, CLB, CSB, CYB, DMB, DMI, ESB, FAB, FAI, FNB, FNI, GKB, GNB, HNB, ICB, ICI, IRB, ITB, ITI, JPB, LTB, LVB, MKB, NCB, NEB, NEI, NWB, NWI, PKB, PLB, PRB, PRI, RMB, ROB, RUB, SFI, SGI, SKB, SPB, SPI, SQB, SSB, SSI, SWB, SWI, THB, TKB, TRB, UAB, UKB, UKI, USB, USI, YGI | Optional |
PRTQLTY | Print quality | *STD, *DRAFT, *NLQ | Optional |
FONT | Font | Element list | Optional |
Element 1: Identifier | Character value, 2, 3, 5, 8, 10, 11, 12, 13, 18, 19, 20, 21, 25, 26, 30, 31, 38, 39, 40, 41, 42, 43, 44, 46, 49, 50, 51, 52, 55, 61, 62, 63, 66, 68, 69, 70, 71, 72, 74, 75, 76, 80, 84, 85, 86, 87, 91, 92, 95, 96, 98, 99, 101, 102, 103, 109, 110, 111, 112, 154, 155, 157, 158, 159, 160, 162, 163, 164, 167, 168, 173, 174, 175, 178, 179, 180, 181, 182, 183, 186, 187, 188, 189, 190, 191, 194, 195, 204, 205, 211, 212, 221, 222, 223, 225, 226, 229, 230, 232, 233, 234, 244, 245, 247, 248, 249, 252, 253, 254, 255, 256, 258, 259, 279, 281, 282, 285, 290, 300, 400, 434, 435, 751, 752, 753, 754, 755, 756, 757, 758, 759, 760, 761, 762, 763, 764, 765, 1051, 1053, 1056, 1351, 1653, 1803, 2103, 4407, 4427, 4535, 4919, 4939, 5047, 5067, 5687, 5707, 5815, 5835, 5943, 6199, 6219, 6327, 6347, 8503, 8523, 8631, 8651, 8759, 8779, 8887, 8907, 12855, 12875, 16951, 16971, 17079, 17099, 33335, 33355, 33463, 33483, 33591, 33601, 33719, 33729, 34103, 34123, 34231, 34251, 37431, 41783, 41803 | ||
Element 2: Point size | 0.1-999.9, *NONE | ||
FORMFEED | Form feed | *TYPE, *CONT, *CONT2, *CUT, *AUTOCUT | Optional |
SEPDRAWER | Separator drawer | 1-255, *FILE | Optional |
SEPPGM | Separator program | Single values: *NONE Other values: Qualified object name |
Optional |
Qualifier 1: Separator program | Name | ||
Qualifier 2: Library | Name, *LIBL, *CURLIB | ||
NBRDRAWER | Number of drawers | 1, 2, 3 | Optional |
PRTERRMSG | Printer error message | *INQ, *INFO | Optional |
MSGQ | Message queue | Single values: *CTLD, *SYSOPR Other values: Qualified object name |
Optional |
Qualifier 1: Message queue | Name, QSYSOPR | ||
Qualifier 2: Library | Name, *LIBL, *CURLIB | ||
APPTYPE | Application type | *NONE, *NRF, *DEVINIT, *APPINIT | Optional |
ACTTMR | Activation timer | 1-2550, 170, *NOMAX | Optional |
INACTTMR | Inactivity timer | 1-30, *ATTACH, *NOMAX, *SEC15, *SEC30 | Optional |
SNPTDEV | SNA pass-through device desc | Name, *NONE | Optional |
SNPTGRP | SNA pass-through group name | Name, *NONE | Optional |
LOGON | Host signon/logon command | Character value, *NONE | Optional |
PACING | Pacing | 1-7, 7 | Optional |
LINESPEED | Line speed | *TYPE, 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600, 19200, 38400 | Optional |
WORDLEN | Word length | *TYPE, 7, 8 | Optional |
PARITY | Type of parity | *TYPE, *EVEN, *ODD, *NONE, *MARK, *SPACE | Optional |
STOPBITS | Stop bits | *TYPE, 1, 2 | Optional |
TRANSFORM | Host print transform | *NO, *YES | Optional |
MFRTYPMDL | Manufacturer type and model | Character value | Optional |
PPRSRC1 | Paper source 1 | *MFRTYPMDL, *LETTER, *LEGAL, *EXECUTIVE, *LEDGER, *A3, *A4, *A5, *B4, *B5, *CONT80, *CONT132, *NONE | Optional |
PPRSRC2 | Paper source 2 | *MFRTYPMDL, *LETTER, *LEGAL, *EXECUTIVE, *LEDGER, *A3, *A4, *A5, *B4, *B5, *CONT80, *CONT132, *NONE | Optional |
ENVELOPE | Envelope source | *MFRTYPMDL, *MONARCH, *NUMBER9, *NUMBER10, *B5, *C5, *DL, *NONE | Optional |
ASCII899 | ASCII code page 899 support | *NO, *YES | Optional |
IMGCFG | Image configuration | Character value, *NONE | Optional |
MAXPNDRQS | Maximum pending requests | 1-31, 6 | Optional |
PRTCVT | Print while converting | *NO, *YES | Optional |
PRTRQSTMR | Print request timer | 1-3600, *NOMAX | Optional |
FORMDF | Form definition | Qualified object name | Optional |
Qualifier 1: Form definition | Name, F1C10110 | ||
Qualifier 2: Library | Name, *LIBL, *CURLIB | ||
CHRID | Character identifier | Single values: *SYSVAL Other values: Element list |
Optional |
Element 1: Graphic character set | 1-32767 | ||
Element 2: Code page | 1-32767 | ||
RMTLOCNAME | Remote location | Element list | Optional |
Element 1: Name or address | Character value | ||
LCLLOCNAME | Local location | Communications name, *NETATR | Optional |
MODE | Mode | Communications name, QSPWTR, *NETATR | Optional |
IGCFEAT | DBCS feature | Element list | Optional |
Element 1: Device features | Character value | ||
Element 2: Last code point | 4141-FFFE | ||
USRDFNOPT | User-defined options | Single values: *NONE Other values (up to 4 repetitions): Character value |
Optional |
USRDFNOBJ | User-defined object | Single values: *NONE Other values: Element list |
Optional |
Element 1: Object | Qualified object name | ||
Qualifier 1: Object | Name | ||
Qualifier 2: Library | Name, *LIBL, *CURLIB | ||
Element 2: Object type | *DTAARA, *DTAQ, *FILE, *USRIDX, *PSFCFG, *USRQ, *USRSPC | ||
USRDTATFM | Data transform program | Single values: *NONE Other values: Qualified object name |
Optional |
Qualifier 1: Data transform program | Name | ||
Qualifier 2: Library | Name, *LIBL, *CURLIB | ||
USRDRVPGM | User-defined driver program | Single values: *NONE Other values: Qualified object name |
Optional |
Qualifier 1: User-defined driver program | Name | ||
Qualifier 2: Library | Name, *LIBL, *CURLIB | ||
SYSDRVPGM | System driver program | Character value, *HPPJLDRV, *IBMPJLDRV, *NETSTNDRV, *IBMSNMPDRV, *IBMIPPDRV | Optional |
SECURECNN | Secure connection | *NO, *YES | Optional |
VLDL | Validation list | Single values: *NONE Other values: Qualified object name |
Optional |
Qualifier 1: Validation list | Name | ||
Qualifier 2: Library | Name, *LIBL, *CURLIB | ||
SNMPUSR | SNMP user name | Character value, *NONE | Optional |
SNMPCNTX | SNMP context name | Character value, *NONE | Optional |
PUBLISHINF | Publishing information | Element list | Optional |
Element 1: Support duplex | *UNKNOWN, *SIMPLEX, *DUPLEX | ||
Element 2: Support color | *UNKNOWN, *NOCOLOR, *COLOR | ||
Element 3: Pages per minute black | 1-32767, *UNKNOWN | ||
Element 4: Pages per minute color | 1-32767, *UNKNOWN | ||
Element 5: Location | Character value, *BLANK, X'' | ||
Element 6: Data streams supported |
Single values: *UNKNOWN Other values (up to 5 repetitions): *PCL, *PS, *PDF, *IPDS, *SCS |
||
TEXT | Text 'description' | Character value, *BLANK | Optional |
DEPLOCNAME | Dependent location name | Communications name, *NONE | Optional |
RMTNETID | Remote network identifier | Communications name, *NETATR, *NONE | Optional |
WSCST | Workstation customizing object | Single values: *NONE Other values: Qualified object name |
Optional |
Qualifier 1: Workstation customizing object | Name | ||
Qualifier 2: Library | Name, *LIBL, *CURLIB | ||
AUT | Authority | Name, *CHANGE, *ALL, *USE, *EXCLUDE, *LIBCRTAUT | Optional |
Top |
Device description (DEVD)
Specifies the name of the device description.
This is a required parameter.
Top |
Device class (DEVCLS)
Specifies the device class for this display station or printer.
- *LCL
This device description is for a device connected to a local work station controller.
- *RMT
This device description is for a device connected to a remote work station controller.
- *VRT
This device description is for a virtual device.
- *SNPT
This device description is for a printer connected to an SNA pass-through advanced program-to-program communications (APPC) controller. SNA pass-through support allows the user to connect this printer with host logical unit (LU) types 0 through 3 applications.
- *LAN
The device description is for a printer connected directly to a local area network (LAN).
Top |
Device type (TYPE)
Specifies the type of device this description represents.
This is a required parameter.
The valid values are:
- 3287
- 3812
- 4214
- 4234
- 4245
- 4247
- 5219
- 5224
- 5225
- 5256
- 5262
- 5553 (double-byte character set printer)
- 5583 (double-byte character set printer)
- 6252
- 6404
- 6408
- 6412
- *IPDS
For ASCII devices only: The following device types are listed with their more common descriptions:
- Type
- Description
- 4019
- IBM LaserPrinter
- 4201
- IBM Proprinter II
- 4202
- IBM Proprinter XL
- 4207
- IBM Proprinter X24
- 4208
- IBM Proprinter XL24
- 4216
- IBM Personal Pageprinter
- 4224
- IBM 4224 Printer
- 4234
- IBM 4234 Printer
- 5204
- IBM Quickwriter
- 6252
- IBM ImpactWriter
Note: Proprinter, Quickwriter, and ImpactWriter are registered trademarks of International Business Machines.
Top |
Device model (MODEL)
Specifies the model number of the device for this description.
- TYPE
- MODEL
- 3287
- 0
- 3812
- 1
- 4214
- 2
- 4234
- 2
- 4245
- T12, T20
- 4247
- CTA
- 5219
- D1, D2
- 5224
- 1, 2
- 5225
- 1, 2, 3, 4
- 5256
- 1, 2, 3
- 5262
- 1
- 5553
- B01
- 5583
- 200
- 6252
- T08
- *IPDS
- 0
- 6404
- CTA
- 6408
- CTA
- 6412
- CTA
For ASCII devices only:
- *ASCII
Specify this value if the model number cannot be easily determined for this printer. The system will assign a model number (if the device has a model number). The model number assigned by the system may not be the actual model number of your printer; see the following table to determine the model number which will be assigned by using *ASCII. It is recommended that you determine your printer's model number if at all possible, and enter that number.
The possible choices are:
- TYPE
- MODEL
- 4019
- 1 (*ASCII)_
- 4201
- 2 (*ASCII), 3
- 4202
- 1 (*ASCII), 2, 3
- 4207
- 1 (*ASCII), 2
- 4208
- 1 (*ASCII), 2
- 4216
- 10 (*ASCII)
- 4224
- 301 (*ASCII), 302, 3E3
- 4234
- 13 (*ASCII)
- 5204
- 1 (*ASCII)
- 6252
- AS8 (*ASCII)
Top |
LAN attachment (LANATTACH)
Specifies the attachment of a printer when DEVCLS(*LAN) is specified.
- *LEXLINK
The printer is attached to lexlink.
- *IP
The printer is attached to TCP/IP.
- *USRDFN
The printer attachment is user-defined; either lexlink or TCP/IP.
Top |
Switched line list (SWTLINLST)
Specifies the name of the switched lines to which the printer is associated when DEVCLS(*LAN) and LANATTACH(*LEXLINK) or LANATTACH(*USRDFN) are specified. The types of switched lines this printer may associate with are: Ethernet IEEE 802.3, and Ethernet with all standards specified.
A maximum of 8 switched lines can be specified.
Top |
LAN remote adapter address (ADPTADR)
Specifies the 12-character hexadecimal LAN address of the remote printer when DEVCLS(*LAN) and LANATTACH(*LEXLINK) or LANATTACH(*USRDFN) are specified. Valid values range from 000000000001 through FFFFFFFFFFFE.
Top |
Adapter type (ADPTTYPE)
Specifies the type of LAN printer adapter to be used when DEVCLS(*LAN) and LANATTACH(*LEXLINK) or LANATTACH(*USRDFN) are specified.
- *INTERNAL
The printer has an internal LAN adapter card.
- *EXTERNAL
The printer has an internal LAN adapter card.
Top |
Adapter connection type (ADPTCNNTYP)
Specifies the type of ports supported by the external LAN printer adapter when DEVCLS(*LAN) and ADPTTYPE(*EXTERNAL) are specified.
Note: This parameter is ignored when ADPTTYPE(*INTERNAL) is specified.
- *PARALLEL
The LAN printer adapter supports one or more parallel ports.
- *SERIAL
The LAN printer adapter supports one or more serial ports.
Top |
Emulated twinaxial device (EMLDEV)
Specifies, for ASCII printers, the twinaxial printer type that the ASCII printer will emulate.
- 3812
3812 model 1 emulation is valid for the following ASCII printers: 4019, 4216, and 5204.
- 5219
5219 model D2 emulation is valid for all ASCII printers except 4201, 4202, and 4234.
- 5224
5224 model 1 emulation is valid for all ASCII printers.
- 5256
5256 model 3 emulation is valid for all ASCII printers.
Top |
Advanced function printing (AFP)
Specifies whether or not this printer does advanced function printing. Most IPDS printers can be configured with AFP(*YES) or AFP(*NO). Most non-IPDS printers can be configured only with AFP(*NO). This parameter is only used if *LCL, *RMT, or *LAN is specified on the Device class (DEVCLS) parameter and *IPDS is specified on the Device type (TYPE) parameter.
- *NO
This printer is not used for advanced function printing.
- *YES
This printer is used for advanced function printing.
Top |
AFP attachment (AFPATTACH)
Specifies the type of attachment used for a printer. This parameter is used only if *YES is specified for the Advanced function printing (AFP) parameter.
- *WSC
3812 or 3816 printers are attached to a local or remote work station controller.
- *APPC
3820, 3825, 3827, or 3835 printers are attached by LU 6.2 using APPC/APPN.
Top |
Port number (PORT)
Specifies the port number for printer devices. Valid values range from 0 through 65535. Some printer devices may further restrict the valid value range.
For twinaxial attached printers: Valid values range from 0 through 7.
For printers attached to a TCP/IP network, where DEVCLS(*LAN), TYPE(3812), and LANATTACH(*IP) are specified:
Note: If the device supports the Simple Network Management Protocol (SNMP), SYSDRVPGM(*IBMSNMPDRV), or the HP Printer Job Language (PJL), SYSDRVPGM(*IBMPJLDRV), refer to the device's documentation, or contact the device manufacturer to determine the port number.
If the device supports the Internet Printing Protocol (IPP), SYSDRVPGM(*IBMIPPDRV), the well known port number is 631.
For printers attached to the ASCII workstation controller: Valid values range from 0 through 17 and indicate the port of the ASCII workstation controller to which the printer is attached. Without the 12-port expansion feature, only ports 0 through 5 are valid. With the 12-port expansion feature, ports 6 through 17 are added.
For printers attached to a LAN, where DEVCLS(*LAN) TYPE(3812), and LANATTACH(*LEXLINK) or LANATTACH(*USRDFN):
Note: If ADPTTYPE(*EXTERNAL) is specified, the port number value indicates which parallel or serial port to use, if there is more than one port on the external LAN adapter. Valid values range from 0 - 17.
If ADPTTYPE(*INTERNAL) is specified, the port number is not required.
Top |
Switch setting (SWTSET)
Specifies the switch setting for local twinaxial devices.
Valid values range from 0 to 6.
Top |
Local location address (LOCADR)
Specifies the local location address for this device.
The possible values range from 00 to FE. The type of controller to which the device is being attached determines which values are valid.
- Controller
- Valid Values
- 5251
- 00, 02-09
- 5294
- 00-1B
- 5394
- 00-14
- 5494
- 00-37
- 3174
- 02-41
- 3274
- 02-41
- SNA Host
- 01-FE
- 4701
- 02-FE
- 4702
- 02-FE
- 4680
- 02-54
- 4684
- 02-FE
- FBSS
- 02-FE
Top |
Auxiliary printer (AUXPRT)
Specifies, for ASCII printers, whether or not this printer description is for an auxiliary printer. An auxiliary printer is attached to an ASCII display station, instead of being physically cabled to the ASCII work station controller. All data sent to the printer passes through the display station.
- *YES
Specifies that this printer is attached to the auxiliary port of an ASCII display.
- *NO
Specifies that this printer is physically cabled to the ASCII work station controller.
For auxiliary printers, the following parameters must match those specified for the ASCII display to which this printer is attached:
- ATTACH (Physical attachment)
- LINESPEED (Line speed)
- WORDLEN (Word length)
- PARITY (Type of parity)
- STOPBITS (Stop bits)
Top |
Emulating ASCII device (EMLASCII)
Specifies, for ASCII devices, whether the device being configured is emulating a supported ASCII device type (TYPE parameter). When an ASCII device is configured, choices for the following parameters are restricted to the valid range for that device:
- ATTACH (Physical attachment)
- LINESPEED (Line speed)
- WORDLEN (Word length)
- PARITY (Type of parity)
- STOPBITS (Stop bits)
For ASCII devices emulating supported ASCII device types, these restrictions may not be applicable (the emulating device might have a wider range of choices for these parameters than the emulated ASCII device does). When EMLASCII(*YES) is specified, these parameter restrictions are not enforced; the user is allowed to enter the full range of values for these parameters, but also is responsible for verifying that the values selected are valid for the device being configured.
- *NO
Specifies that the device being configured is one of the supported ASCII device types Device type (TYPE) parameter, and that the device-specific restrictions for the physical attachment, line speed, word length, type of parity, and stop bits parameters are to be enforced.
- *YES
Specifies that the device being configured is emulating one of the supported ASCII device types (TYPE parameter), and that the device-specific restrictions for the physical attachment, line speed, word length, type of parity, and stop bits parameters are not enforced.
Top |
Physical attachment (ATTACH)
Specifies, for ASCII display stations, the physical attachment of the display station to the ASCII work station controller.
- *EIA422
The EIA-422 attachment (valid only for models 3101, 3151, 3161, 3162, 3163, and 3164) is used.
- *DIRECT
Specifies EIA-232 Direct attachment.
- *MODEM
Specifies EIA-232 modem attachment.
- *PTT
Specifies Post Telephone and Telegraph (PTT) attachment.
- *WIRE3
Specifies EIA-232 3-wire attachment.
- *WIRE4
Specifies EIA-232 4-wire attachment.
Top |
Online at IPL (ONLINE)
Specifies whether this object is automatically varied on at initial program load (IPL).
- *YES
This device is varied on automatically at IPL.
- *NO
This device is not varied on automatically at IPL.
Top |
Attached controller (CTL)
Specifies the name of the controller description to which this device is attached.
Note: To use this device for communicating with a remote location that resides on the same system as the local location, specify a controller description that was created with LINKTYPE (*LOCAL) specified.
Top |
Language type (LNGTYPE)
For ASCII printers, describes the default country keyboard language identifier for this printer.
The following languages can be used by ASCII devices only if either host print transform or work station customization are also used: ALI, BGB, CSB, ESB, HNB, IRB, JPB, LTB, LVB, MKB, PKB, PLB, RMB, RUB, SKB, SQB, TRB, UAB, and YGI.
- *SYSVAL
The system uses the QKBDTYPE system value.
- language-type
Specify the correct country keyboard language identifier for this printer from the following table.
- Identifier
- Language(Country) - ASCII Device Groups
- ALI
- Albania
- CLB
- Arabic X/Basic - D*
- AGB
- Austria/Germany - A, B
- AGI
- Austria/Germany Multinational - A, B
- BLI
- Belgium Multinational - B
- BRB
- Brazilian Portuguese
- BGB
- Bulgaria
- CAB
- Canadian French - A, B
- CAI
- Canadian French Multinational - A, B
- SPB
- Catalan
- YGI
- Croatia/Serbia (Latin)/Slovenia
- CYB
- Cyrillic
- CSB
- Czech Republic
- DMB
- Denmark - B
- DMI
- Denmark Multinational - B
- ESB
- Estonia
- FNB
- Finland/Sweden - B
- FNI
- Finland/Sweden Multinational - B
- FAB
- France (Azerty) - A, B
- FAI
- France (Azerty) Multinational - A, B
- GNB
- Greek (see note)
- NCB
- Hebrew - D*
- HNB
- Hungary
- ICB
- Iceland
- ICI
- Iceland Multinational
- IRB
- Iran (Farsi)
- ITB
- Italy - A, B
- ITI
- Italy Multinational - A, B
- JPB
- Japan Latin Extended
- ROB
- Latin-2/ROECE
- LVB
- Latvia
- LTB
- Lithuania
- MKB
- FYR Macedonia (Former Yugoslav Republic)
- NEB
- Netherlands
- NEI
- Netherlands Multinational
- NWB
- Norway - B
- NWI
- Norway Multinational - B
- PLB
- Poland
- PRB
- Portugal - B
- PRI
- Portugal Multinational - B
- RMB
- Romania
- RUB
- Russia
- SQB
- Serbia (Cyrillic)
- SKB
- Slovakia
- SPB
- Spain - B
- SPI
- Spain Multinational - B
- SSB
- Spanish Speaking - B
- SSI
- Spanish Speaking Multinational - B
- SWB
- Sweden - B
- SWI
- Sweden Multinational - B
- SFI
- Switzerland/France Multinational - B
- SGI
- Switzerland/Germany Multinational - B
- THB
- Thailand
- TKB
- Turkey (Qwerty)
- TRB
- Turkey (F)
- UAB
- Ukraine
- UKB
- United Kingdom - A, B
- UKI
- United Kingdom Multinational - A, B
- USB
- United States/Canada - A, B, C
- USI
- United States/Canada Multinational - A, B, C
- PKB
- Urdu
- YGI
- Languages of the former Yugoslavia
Note: The GNB code is the current identifier for Greece. The GKB code was used prior to V2R1, and continues to be supported, but provides fewer characters than the recommended GNB code.
Top |
Print quality (PRTQLTY)
Specifies whether the default print quality for ASCII printers should be draft (*DRAFT), standard (*STD), or near-letter quality (*NLQ), from least to best quality. All ASCII printer types (with all emulations) support this parameter. If the printer is emulating a 5219 (EMLDEV parameter), this quality setting is overridden by individual printer files sent to this printer.
Note: All twinaxial printer emulations support this parameter. If the ASCII printer is emulating a 5219 twinaxial printer, then this print quality setting can be overridden by individual print files sent to this printer.
- *STD
Specifies standard quality setting.
- *DRAFT
Specifies draft quality setting.
- *NLQ
Specifies near letter quality setting.
Top |
Font identifier (FONT)
Specifies the font identifier and the point size used by the 3812, 3816, 5219 printers (including ASCII printers emulating the 5219 printer), and IPDS printers. A font identifier (up to 10 digits) is used with this printer file. Each font identifier has an implied characters-per-inch (CPI) value.
Note: Some fonts may be substituted by the printer. Consult the various printer reference guides for details.
Element 1: Font identifier
- identifier
Specify the font identifier associated with this printer.
Element 2: Point size
- *NONE
The point size is supplied by the system and is determined by the specified font identifier.
- point-size
Specify a point size ranging from 0.1 through 999.9.
Top |
Form feed (FORMFEED)
Specifies the form feed attachment used for this spooled file. This parameter determines how forms are fed into the printer. Not all printers support this parameter. Refer to the Create Printer File (CRTPRTF) command to determine if this parameter is supported.
Note: The FORMFEED parameter is overridden by the value specified on the PPRSRC1 parameter when the host print transform function is enabled.
- *TYPE
Form feed value is determined by the system based on printer type.
For MODEL(*IPDS), this value cannot be determined accurately. You must select a value that is appropriate for the printer: *CONT, *CONT2, *CUT, or *AUTOCUT.
- *CONT
Continuous forms are used by the printer. Some printers (3812, 4216) don't have tractor feed attachments (they don't actually support continuous forms). But in some cases, *CONT must be specified to match what the emulated twinaxial printer supports.
- *CONT2
Continuous forms are used by the printer. The form is fed from the secondary tractor feed attachment. The secondary tractor feed attachment must be on the printer device. This value is allowed for 4214, 4234, 4247, and *IPDS printers.
- *CUT
Single-cut sheets are used by the printer. For cut sheets, the forms alignment message is not sent. This value is valid for all ASCII printers, except the 4216 Printer emulating a SCS 5219 Printer.
- *AUTOCUT
Single-cut sheets are fed into the printer automatically. The printer must have the sheet feed attachment. The *AUTOCUT feature is valid for 4207, 4208, 4216, 4224, and 5204 printers that are emulating a 5219 printer.
Top |
Separator drawer (SEPDRAWER)
Specifies which drawer is selected for printing separators.
- *FILE
The separator pages are printed on paper from the same drawer as the rest of the spooled file.
- separator-drawer
Specify a value ranging from 1 through 255 to indicate the drawer from which the separator pages are printed.
Note: For some printers, SEPDRAWER(3) implies an envelope drawer.
Top |
Separator program (SEPPGM)
Specifies a style of separator page by allowing you to call a user exit program while printing job and file separators.
- *NONE
The separator pages are not changed.
- exit-program-name
Specify an exit program name.
The possible library values are:
- *LIBL
- All libraries in the library list for the current thread are searched until the first match is found.
- *CURLIB
The current library for the job is used to locate the exit program. If no library is specified as the current library for the job, the QGPL library is used.
- library-name
Specify the name of the library where the exit program is located.
Top |
Number of drawers (NBRDRAWER)
Specifies, for ASCII printers defined with *AUTOCUT for the form feed (FORMFEED parameter), whether the printer's sheet feed attachment supports 1, 2, or 3 drawers. This parameter is not applicable if form feed is *CONT or *CUT.
Note: The number of drawers parameter specifies how many drawers the printer physically supports, not which drawer the paper is selected from. The individual print files sent to the printer will dictate which drawer is selected.
- 1
One drawer is physically supported.
- 2
Two drawers are physically supported.
- 3
Three drawers are physically supported.
For the printers that support FORMFEED(*AUTOCUT), the following number of drawers are supported:
- For 4207-1 and 4208 printers, only NBRDRAWER(1) is valid.
- For a 4224 printer, only NBRDRAWER(3) is valid.
- For 4207-2, 4216, and 5204 printers, NBRDRAWER values of 1, 2, and 3, are supported.
Note: NBRDRAWER(3) implies that two paper drawers and an envelope drawer are used.
Top |
Printer error message (PRTERRMSG)
Specifies whether the device has inquiry messages or informational messages for recoverable errors. This parameter is not applicable for printers attached to ASCII work station controllers.
- *INQ
Inquiry messages are sent for recoverable errors.
- *INFO
Informational messages are sent for recoverable errors.
Top |
Message queue (MSGQ)
Specifies the message queue to which operational messages for this device are sent.
- *CTLD
- Messages are sent to the message queue defined in the attached controller. The message queue is determined when the device is varied on.
- *SYSOPR
- Messages are sent to the system operator message queue (QSYS/QSYSOPR).
- message-queue-name
Specify the name of the message queue to which operational messages are sent.
- *LIBL
All libraries in the job's library list are searched until the first match is found.
- *CURLIB
The current library for the job is searched. If no library is specified as the current library for the job, the QGPL library is used.
- library-name
Specify the name of the library to be searched.
Top |
Application type (APPTYPE)
Specifies the application type used by this device.
- *NONE
The device is not used for any application.
- *NRF
The device is used for the Network Routing Facility application.
- *DEVINIT
The device starts (initiates) the session.
- *APPINIT
The application program starts (initiates) the session.
Top |
Activation timer (ACTTMR)
Specifies the amount of time (in seconds) to wait for the device to respond to the activation request from the host IBM i. If the device does not respond within this time, it is considered not available.
Note: This parameter is valid only on switched lines and when *SNPT is specified for the DEVCLS parameter.
- 170
The device waits 170 seconds.
- *NOMAX
The device waits forever.
Note: *NOMAX is valid only when DEVCLS(*LAN) and AFP(*YES) are specified.
- activation-timer
Specify a number indicating the number of seconds before the device is considered not available.
Note: If LANATTACH is *LEXLINK, and the specified number of seconds has elapsed, an inquiry message is issued.
Top |
Inactivity timer (INACTTMR)
Specifies an inactivity timer (time-out) value. This parameter also specifies what happens when the time-out value is exceeded, dependent on other attributes of the device:
- For devices connected using SNA pass-through (SNPT) support, the user is informed by a message to QSYSOPR and the session is ended when the amount of time that the device is not bound to a host application exceeds the time-out value. The user must reestablish the connection and session.
- For devices with an application type value of *APPINIT, *DEVINIT, or *NRF, the session is ended when the device is inactive (the file opened against the device is closed and no additional requests to open files are received for the device) for a period of time that exceeds the time-out value.
Note: This timer is not used by devices allocated to a subsystem (normal interactive use) because the subsystem always has a file open for the device. The timer is used by batch jobs that open and close files for the device.
For all other attachments, valid values range from 1 through 30 minutes.
- *ATTACH
This value varies by the value on the physical attachment (ATTACH parameter) and certain values on the device class (DEVCLS) and application type (APPTYPE) parameters.
- For DEVCLS(*SNPT) or APPTYPE(*DEVINIT) support, *ATTACH maps to *NOMAX.
- For DEVCLS(*LAN), *ATTACH maps to *SEC15.
- For APPTYPE(*NRF) and APPTYPE(*APPINIT) support, *ATTACH maps to 1 minute.
- *NOMAX
No maximum inactivity time is tracked (no inactivity timer is to be enforced).
- *SEC15
A 15-second time-out period is used.
- *SEC30
A 30-second time-out period is used.
- inactivity-timer
Specifies a time-out value in minutes.
Top |
SNA pass-through device desc (SNPTDEV)
Specifies the name of the associated SNA pass-through device that is attached to a host or advanced program-to-program communications (APPC) controller.
- *NONE
No name is specified.
- associated-device-name
Specify the name of a device that is attached to a host or an APPC controller that is associated with this device.
Top |
SNA pass-through group name (SNPTGRP)
Specifies the name configured for a group of host devices in a configuration list (see CRTCFGL command). This indicates that this device is associated with any one of the devices in that group which is available.
- *NONE
No name is specified.
- group-name
Specify the name configured for a group of host devices that must be associated with this device.
Top |
Host signon/logon command (LOGON)
Specifies the sign-on (logon) text. This parameter is allowed when DEVCLS(*SNPT) or APPTYPE(*NRF) is specified. APPTYPE(*NRF) specifies the logon string that is sent to the host system when a request is made to establish a session. DEVCLS(*SNPT) specifies the sign-on (logon) text that is sent to the host system after starting SNA pass-through support.
This parameter also specifies the logon string that is sent to the system services control point (SSCP) on the host network when the file is opened for *NRF.
- *NONE
No text is sent to the host system.
- host-logon-command
Specify text that is sent to the host system. The text must be enclosed in apostrophes if it contains blanks or other special characters. All apostrophes within the text must be represented by two apostrophes. A maximum of 256 characters can be specified.
Top |
Pacing value (PACING)
Specifies the SNA pacing value used for request/response units (RUs).
- 7
Specifies 7-bit word lengths.
- pacing-value
Specify a value, ranging from 1 through 7.
Top |
Line speed (LINESPEED)
Specifies the line speed in bits per second (bps).
- *TYPE
- The system uses the suggested setting for this device type. *TYPE will select 19200 bits per second for all printers.
- line-speed
Specify the line speed. Valid values are: 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600, 19200, or 38400.
Top |
Word length (WORDLEN)
Specifies, for ASCII devices, the word length (bits per character) used to communicate over the attachment between the ASCII work station controller and the device. For modem and Post Telephone and Telegraph (PTT) attachments, the word length must be the same as the word length selected for the modem. For auxiliary printers connected to the auxiliary port of a display station, the word length must be the same as the word length specified for the display's device description.
Some devices do not support all word lengths; verify that your device supports the word length you intend to use.
- *TYPE
The system uses the suggested setting for this device type.
*TYPE selects 8-bit word lengths for all printers.
- 7
Specifies 7-bit word lengths.
- 8
Specifies 8-bit word lengths.
Top |
Type of parity (PARITY)
Specifies, for ASCII devices, the type of parity used to communicate over the attachment between the ASCII work station controller and the device. For modem and Post Telephone and Telegraph (PTT) attachments, the type of parity must be the same as the type of parity selected for the modem. For auxiliary printers connected to the auxiliary port of a display station, the type of parity must be the same as the type of parity specified for the display's device description.
Some devices do not support all types of parity; verify that your device supports the type of parity you intend to use.
- *TYPE
The system uses the suggested setting for this device type.
*TYPE will select *EVEN (Even parity) for all printers.
- *EVEN
Specifies Even parity.
- *ODD
Specifies Odd parity.
- *NONE
Specifies that no parity bit is used.
- *MARK
Specifies Mark parity (1 is used for the parity).
- *SPACE
Specifies Space parity (0 is used for the parity).
Top |
Stop bits (STOPBITS)
Specifies, for ASCII devices, the number of stop bits used to communicate over the attachment between the ASCII work station controller and the device. For modem and Post Telephone and Telegraph (PTT) attachments, the number of stop bits must be the same as the number of stop bits selected for the modem. For auxiliary printers connected to the auxiliary port of a display station, the number of stop bits must be the same as the number of stop bits specified for the display's device description.
Some devices do not support all numbers of stop bits; verify that your device supports the number of stop bits you intend to use.
- *TYPE
The system uses the suggested setting for this device type.
*TYPE will select 1 stop bit for all printers.
- 1
Specifies 1 stop bit.
- 2
Specifies 2 stop bits.
Top |
Host print transform (TRANSFORM)
Specifies whether the printer uses host print transform support.
- *NO
The printer does not use host print transform support.
- *YES
The printer uses host print transform support.
Top |
Manufacturer type and model (MFRTYPMDL)
Specifies the manufacturer, type, and model for a printer using the host print transform function.
- character-value
- Specify the corresponding manufacturer, type, and model for a printer.
The following list shows the values to be specified for the device you are using:
Note: If *WSCSTxxx is specified for MFRTYPMDL, a workstation customizing object must be specified.
Manufacturer Type and Model Table
*IBM2380 IBM 2380 Personal Printer Series II IBM 2380 Plus Printer *IBM2381 IBM 2381 Personal Printer Series II IBM 2381 Plus Printer *IBM2390 IBM 2390 Personal Printer Series II IBM 2390 Plus Printer *IBM2391 IBM 2391 Personal Printer Series II IBM 2391 Plus Printer *IBM3112 IBM 3112 Page Printer *IBM3116 IBM 3116 Page Printer *IBM3130 IBM 3130 Advanced Function Printer *IBM3812 IBM 3812 Pageprinter *IBM3816 IBM 3816 Pageprinter *IBM3912HP IBM 3912 Page Printer (HP Mode) *IBM3916HP IBM 3916 Page Printer (HP Mode) *IBM39302 IBM 39302 IBM 3930-02S Page Printer IBM 39302 IBM 3930-02D Page Printer *IBM39303 IBM 39303 IBM 3930-03S Page Printer IBM 39303 IBM 3930-03D Page Printer *IBM4019 IBM 4019 LaserPrinter IBM 4019E LaserPrinter E *IBM4019HP IBM 4019 LaserPrinter (HP Mode) IBM 4019E LaserPrinter E (HP Mode) *IBM4029 IBM 4029-010 LaserPrinter 5E IBM 4029-020 LaserPrinter 6 IBM 4029-030 LaserPrinter 10 IBM 4029-040 LaserPrinter 10L *IBM4029HP IBM 4029-010 LaserPrinter 5E (HP Mode) IBM 4029-020 LaserPrinter 6 (HP Mode) IBM 4029-030 LaserPrinter 10 (HP Mode) IBM 4029-040 LaserPrinter 10L (HP Mode) *IBM4037 IBM 4037 5E Printer *IBM4039HP IBM 4039 LaserPrinter 10D (HP Mode) IBM 4039 LaserPrinter 10D Plus (HP Mode) IBM 4039 LaserPrinter 10R (HP Mode) IBM 4039 LaserPrinter 10R Plus (HP Mode) IBM 4039 LaserPrinter 12R (HP Mode) IBM 4039 LaserPrinter 12R Plus (HP Mode) IBM 4039 LaserPrinter 12L (HP Mode) IBM 4039 LaserPrinter 12L Plus (HP Mode) IBM 4039 LaserPrinter 16L (HP Mode) IBM 4039 LaserPrinter 16L Plus (HP Mode) *IBM4070 IBM 4070 IJ (IBM Mode) *IBM4070EP IBM 4070 IJ (Epson Mode) *IBM4072 IBM 4072 ExecJet *IBM4076 IBM 4076 ExecJet II Printer (HP Mode) *IBM42011 IBM 4201-1 Proprinter *IBM42012 IBM 4201-2 Proprinter II *IBM42013 IBM 4201-3 Proprinter III *IBM42021 IBM 4202-1 Proprinter XL *IBM42022 IBM 4202-2 Proprinter II XL *IBM42023 IBM 4202-3 Proprinter III XL *IBM42071 IBM 4207-1 Proprinter X24 *IBM42072 IBM 4207-2 Proprinter X24E *IBM42081 IBM 4208-1 Proprinter XL24 *IBM42082 IBM 4208-2 Proprinter XL24E *IBM4212 IBM 4212 Proprinter 24P *IBM4216 IBM 4216-10 Personal Pageprinter *IBM4226 IBM 4226-302 Printer *IBM4230 IBM 4230-4S3 Printer (IBM Mode) IBM 4230-4I3 Printer (IBM Mode) *IBM4232 IBM 4232-302 Printer (IBM Mode) *IBM4244ASF IBM 4244 Printer (single tractor feed and ASF) *IBM4244DUAL IBM 4244 Printer (dual tractor feeds) *IBM4244MAN IBM 4244 Printer (single form feed or manual selection) *IBM4247ASF IBM 4247 Printer (single tractor feed and ASF) *IBM4247DUAL IBM 4247 Printer (dual tractor feeds) *IBM4247MAN IBM 4247 Printer (single form feed or manual selection) *IBM4308 IBM Infoprint Color 8 *IBM4312 IBM Network Printer 12 *IBM4317 IBM Network Printer 17 *IBM4320 IBM Infoprint 20 *IBM4322 IBM Infoprint 21 *IBM4324 IBM Network Printer 24 *IBM4332 IBM Infoprint 32 *IBM4340 IBM Infoprint 40 *IBM47121 IBM 4712-1 Transaction Printer *IBM47122 IBM 4712-2 Transaction Printer *IBM47221 IBM 4722-1 Document Printer *IBM47222 IBM 4722-2 Document Printer *IBM4770 IBM 4770 InkJet Transaction Printer *IBM4912 IBM Infoprint 12 *IBM5152 IBM 5152 Graphics Printer *IBM5201 IBM 5201-2 Quietwriter *IBM5202 IBM 5202-1 Quietwriter III *IBM5204 IBM 5204-1 Quickwriter *IBM5216 IBM 5216 Wheelprinter *IBM5575 IBM 5579-H02 Printer IBM 5579-K02 Printer IBM 5577-T02 Printer IBM 5579-S02 Printer IBM 5577-K02 Printer IBM 5577-J02 Printer IBM 5577-G02 Printer IBM 5577-H02 Printer IBM 5577-F02 Printer IBM 5577-B02 Printer IBM 5575-H02 Printer IBM 5575-F02 Printer (with SBCS Cartridge) IBM 5575-B02 Printer (with SBCS Cartridge) IBM 5573-K02 Printer IBM 5573-J02 Printer IBM 5573-H02 Printer IBM 5573-G02 Printer IBM 5572-B02 Printer IBM 5417-011 Printer IBM 5407-011 Printer IBM 5327-011 Printer IBM 4208-502 Printer *IBM5575AMOV IBM 5575 Printer Series (alternate version) *IBM6400 IBM 6400 Printers (IBM Mode) *IBM6400EP IBM 6400 Printers (Epson Mode) *IBM6404 IBM 6404 Printers (IBM Mode) *IBM6404EP IBM 6404 Printers (Epson Mode) *IBM6408 IBM 6408-A00 Printer (IBM Mode) IBM 6408-CTA Printer (IBM Mode) *IBM6408EP IBM 6408-A00 Printer (Epson Mode) IBM 6408-CTA Printer (Epson Mode) *IBM6412 IBM 6412-A00 Printer (IBM Mode) IBM 6412-CTA Printer (IBM Mode) *IBM6412EP IBM 6412-A00 Printer (Epson Mode) IBM 6412-CTA Printer (Epson Mode) *IBMPAGES IBM 5589-H01 Printer IBM 5588-H02 Printer IBM 5587-H01 Printer IBM 5586-H02 Printer IBM 5585-H01 Printer IBM 5584-K02 Printer IBM 5584-H02 Printer IBM 5584-G02 Printer *IBMPAGESNPB Same as *IBMPAGES, but without text positioning adjustments for a no-print border *IBMPAGES300 IBM Network Printer 12 (with PAGES feature) IBM Network Printer 17 (with PAGES feature) IBM Network Printer 24 (with PAGES feature) IBM Infoprint 20 (with PAGES feature) IBM Infoprint 32 (with PAGES feature) IBM Infoprint 40 (with PAGES feature) *IBMPAGES300NPB Same as *IBMPAGES300, but without text positioning adjustments for a no-print border *INFOPRINT8C IBM Infoprint Color 8 *INFOPRINT12 IBM Infoprint 12 *INFOPRINT20 IBM Infoprint 20 *INFOPRINT21 IBM Infoprint 21 *INFOPRINT32 IBM Infoprint 32 *INFOPRINT40 IBM Infoprint 40 *INFOPRINT70 IBM Infoprint 70 *INFOPRINT85 IBM Infoprint 2085 *INFOPRINT105 IBM Infoprint 2105 *INFOPRINT1116 IBM Infoprint 1116 *INFOPRINT1120 IBM Infoprint 1120 *INFOPRINT1125 IBM Infoprint 1125 *INFOPRINT1130 IBM Infoprint 1130 *INFOPRINT1140 IBM Infoprint 1140 *INFOPRINT1145 IBM Infoprint 1145 *INFOPRINT1220C IBM Infoprint Color 1220 *INFOPRINT1222 IBM Infoprint 1222 *INFOPRINT1226 IBM Infoprint 1226 *INFOPRINT1228C IBM Infoprint Color 1228 *INFOPRINT1312 IBM Infoprint 1312 *INFOPRINT1332 IBM Infoprint 1332 *INFOPRINT1334C IBM Infoprint Color 1334 *INFOPRINT1352 IBM Infoprint 1352 *INFOPRINT1354C IBM Infoprint Color 1354 *INFOPRINT1357C IBM Infoprint Color 1357 *INFOPRINT1372 IBM Infoprint 1372 *INFOPRINT1400C IBM Infoprint Color 14xx Series Printer *INFOPRINT1410 IBM Infoprint 1410 MFP *INFOPRINT1412 IBM Infoprint 1412 *INFOPRINT1422 IBM Infoprint 1422 *INFOPRINT1500 IBM Infoprint 15xx Series Printer *INFOPRINT1500C IBM Infoprint Color 15xx Series Printer *INFOPRINT1600 IBM Infoprint 16xx Series Printer *INFOPRINT1600C IBM Infoprint Color 16xx Series Printer *INFOPRINT2000 IBM Infoprint 2000 *INFOPRINT2085 IBM Infoprint 2085 *INFOPRINT2105 IBM Infoprint 2105 *INFOPRINT2190 IBM Infoprint 2190 *INFOPRINT2210 IBM Infoprint 2210 *INFOPRINT2235 IBM Infoprint 2235 *INFOPRINT2705 IBM Infoprint 2105 *INFOPRINT2706 IBM Infoprint 2105ES *INFOPRINT2761 IBM Infoprint 2060ES *INFOPRINT2775 IBM Infoprint 2075ES *INFOPRINT2785 IBM Infoprint 2085 *INFOPRINT2790 IBM Infoprint 2090ES *INFOPRINT4247 IBM Infoprint 4247 Printer Series *INFOPRINT6500 IBM Infoprint 6500 (Epson Mode) *CANLIPS3 Canon LIPS3 DBCS Printers *CANLIPS3NPB Same as *CANLIPS3, but without text positioning adjustments for a no-print border *CPQPM15 COMPAQ PageMark 15 (HP Mode) *CPQPM20 COMPAQ PageMark 20 (HP Mode) *EPAP2250 Epson ActionPrinter 2250 *EPAP3250 Epson ActionPrinter 3250 *EPAP5000 Epson ActionPrinter 5000 *EPAP5500 Epson ActionPrinter 5500 *EPDFX5000 Epson DFX-5000 *EPDFX8000 Epson DFX-8000 *EPEPL7000 Epson EPL-7000 *EPEPL8000 Epson EPL-8000 *EPFX850 Epson FX-850 *EPFX870 Epson FX-870 *EPFX1170 Epson FX-1170 *EPLQ510 Epson LQ-510 *EPLQ570 Epson LQ-570 *EPLQ860 Epson LQ-860 *EPLQ870 Epson LQ-870 *EPLQ1070 Epson LQ-1070 *EPLQ1170 Epson LQ-1170 *EPLQ2550 Epson LQ-2550 *EPLX810 Epson LX-810 *EPSQ870 Epson SQ-870 *EPSQ1170 Epson SQ-1170 *ESCPDBCS Epson ESC/P DBCS Printers *HPII HP LaserJet Series II *HPIID HP LaserJet IID *HPIIP HP LaserJet IIP *HPIII HP LaserJet III *HPIIID HP LaserJet IIID *HPIIIP HP LaserJet IIIP *HPIIISI HP LaserJet IIISi *HP4 HP LaserJet 4 *HP5 HP LaserJet 5 series *HP5SI HP LaserJet 5Si *HP6 HP LaserJet 6 series *HP310 HP DeskJet 310 *HP320 HP DeskJet 320 *HP500 HP DeskJet 500 *HP520 HP DeskJet 520 *HP540 HP DeskJet 540 *HP550C HP DeskJet 550C *HP560C HP DeskJet 560C *HP1100 HP LaserJet 1100 series *HP1200C HP DeskJet 1200C *HP1600C HP DeskJet 1600C *HP4000 HP LaserJet 4000 series *HP5000 HP LaserJet 5000 series *HP8000 HP LaserJet 8000 series *HPCOLORLJ HP Color LaserJet 5 *HPDBCS HP LaserJet-compatible printers for Double Byte Character Set (DBCS) input *HPPAINT HP PaintJet HP PaintJet XL HP PaintJet XL300 *LEX2380 Lexmark Forms Printer 2380 Plus *LEX2381 Lexmark Forms Printer 2381 Plus *LEX2390 Lexmark Forms Printer 2390 Plus *LEX2391 Lexmark Forms Printer 2391 Plus *LEX4227 Lexmark 4227 Forms Printer *LEXMARKC Lexmark C Series Printer *LEXMARKC510 Lexmark C510 Color Printer *LEXMARKC750 Lexmark C750 Color Printer *LEXMARKC752 Lexmark C752 Color Printer *LEXMARKC910 Lexmark C910 Color Printer *LEXMARKC912 Lexmark C912 Color Printer *LEXMARKE Lexmark E Series Printer *LEXMARKE322 Lexmark E322 Printer *LEXMARKE323 Lexmark E323 Printer *LEXMARKE330 Lexmark E330 Printer Lexmark E332n Printer *LEXMARKT Lexmark T Series Printer *LEXMARKT420 Lexmark T420 Printer *LEXMARKT520 Lexmark T520 Printer *LEXMARKT522 Lexmark T522 Printer *LEXMARKT620 Lexmark T620 Printer *LEXMARKT622 Lexmark T622 Printer *LEXMARKT630 Lexmark T630 Printer *LEXMARKT632 Lexmark T632 Printer *LEXMARKT634 Lexmark T634 Printer *LEXMARKW Lexmark W Series Printer *LEXMARKW812 Lexmark W812 Printer *LEXMARKW820 Lexmark W820 Printer *LEXMARKX422 Lexmark X422 MFP *LEXOPTRA Lexmark Optra Family (HP Mode) *LEXOPTRAC Lexmark Optra C Color Printer *LEXOPTRAN Lexmark Optra N Printer *LEXOPTRAS Lexmark Optra S Printer family *LEXOPTRASC Lexmark Optra SC Color Printer Lexmark Optra Color 1200 Printer *LEXOPTRAT Lexmark Optra T Printer series *LEXOPTRAW Lexmark Optra W Printer series *NECP2 NEC P2 Pinwriter *NECP2200 NEC P2200 Pinwriter *NECP2200XE NEC P2200 XE Pinwriter *NECP5200 NEC P5200 Pinwriter *NECP5300 NEC P5300 Pinwriter *NECP6200 NEC P6200 Pinwriter *NECP6300 NEC P6300 Pinwriter *NECPCPR201 NEC PC-PR101 DBCS Printer NEC PC-PR201 DBCS Printer *NONE Printer supports page-descriptor language generated by the CVTIMG API. NOTE: Spoolfiles with device type of *SCS or *AFPDS cannot be processed by the Host Print Transform function for these printers. *OKI184IBM Okidata Microline 184 Turbo (IBM Mode) *OKI320IBM Okidata Microline 320 (IBM Mode) *OKI321IBM Okidata Microline 321 (IBM Mode) *OKI390IBM Okidata Microline 390 Plus (IBM Mode) *OKI391IBM Okidata Microline 391 Plus (IBM Mode) *OKI393IBM Okidata Microline 393 Plus (IBM Mode) *OKI590IBM Okidata Microline 590 (IBM Mode) *OKI591IBM Okidata Microline 591 (IBM Mode) *OKI400 Okidata OL400 LED Page Printer *OKI800 Okidata OL800 LED Page Printer *OKI810 Okidata OL810 LED Page Printer *OKI820 Okidata OL820 LED Page Printer *OKI3410 Okidata Pacemark 3410 *PAN1123EP Panasonic KX-P1123 (Epson Mode) *PAN1124EP Panasonic KX-P1124 (Epson Mode) *PAN1124IEP Panasonic KX-P1124i (Epson Mode) *PAN1180EP Panasonic KX-P1180 (Epson Mode) *PAN1180IEP Panasonic KX-P1180i (Epson Mode) *PAN1191EP Panasonic KX-P1191 (Epson Mode) *PAN1624EP Panasonic KX-P1624 (Epson Mode) *PAN1654EP Panasonic KX-P1654 (Epson Mode) *PAN1695EP Panasonic KX-P1695 (Epson Mode) *PAN2123EP Panasonic KX-P2123 (Epson Mode) *PAN2124EP Panasonic KX-P2124 (Epson Mode) *PAN2180EP Panasonic KX-P2180 (Epson Mode) *PAN2624EP Panasonic KX-P2624 (Epson Mode) *PAN4410HP Panasonic KX-P4410 (HP Mode) *PAN4420HP Panasonic KX-P4420 (HP Mode) *PAN4430HP Panasonic KX-P4430 (HP Mode) *PAN4450IHP Panasonic KX-P4450i (HP Mode) *PAN4451HP Panasonic KX-P4451 (HP Mode) *PANASONIC2310 Panasonic DP-2310 Printer *PANASONIC3010 Panasonic DP-3010 Printer *PANASONIC3510 Panasonic DP-3510 Printer *PANASONIC3520 Panasonic DP-3520 Printer *PANASONIC4510 Panasonic DP-4510 Printer *PANASONIC4520 Panasonic DP-4520 Printer *PANASONIC6010 Panasonic DP-6010 Printer *PANASONIC6020 Panasonic DP-6020 Printer *PDF Portable Document Format *PDFEMBEDTT Portable Document Format. All TrueType font references are embedded in the output document. *PDFIBMWT Portable Document Format. References to IBM WorldType fonts shipped with the system are mapped to standard PDF font references. *RICOH1515 Ricoh Aficio 1515 Printer Series *RICOH2015 Ricoh Aficio 2015 Printer Series *RICOH2018 Ricoh Aficio 2018 Printer Series *RICOH2022 Ricoh Aficio 2022 Printer Series *RICOH2027 Ricoh Aficio 2027 Printer Series *RICOH2032 Ricoh Aficio 2032 Printer Series *RICOH2035 Ricoh Aficio 2035 Printer Series *RICOH2045 Ricoh Aficio 2045 Printer Series *RICOHAP400 Ricoh Aficio AP400 Printer Series *RICOHAP600N Ricoh Aficio AP600N Printer Series *RICOHAP900 Ricoh Aficio AP900 Printer Series *RICOHAP3200 Ricoh Aficio AP3200 Printer Series *RICOHAP4510 Ricoh Aficio AP4510 Printer Series *RICOHCL2000 Ricoh Aficio CL2000 Color Printer Series *RICOHCL3100 Ricoh Aficio CL3000e Color Printer Series Ricoh Aficio CL3100N Color Printer Series *RICOHCL4000 Ricoh Aficio CL4000 Color Printer Series *RICOHCL5000 Ricoh Aficio CL5000 Color Printer Series *RICOHCL7000 Ricoh Aficio CL7000 Color Printer Series *RICOHCL7100 Ricoh Aficio CL7100 Color Printer Series *RICOHMP1100 Ricoh Aficio MP1100 Printer Series *RICOHMP1350 Ricoh Aficio MP1350 Printer Series *RICOHMP2352 Ricoh Aficio MP2352 Printer Series *RICOHMP2500 Ricoh Aficio MP2500 Printer Series *RICOHMP5000 Ricoh Aficio MP5000 Printer Series *RICOHMP9000 Ricoh Aficio MP9000 Printer Series *RICOHSP4100N Ricoh Aficio SP4100N Printer Series Ricoh Aficio SP4110N Printer Series *RICOHSP5200S Ricoh Aficio SP5200S Printer Series *RICOHSP6330N Ricoh Aficio SP6330N Printer Series *RICOHSP8200DN Ricoh Aficio SP8200DN Printer Series *RICOHSP9100DN Ricoh Aficio SP9100DN Printer Series *RICOHSPC430DN Ricoh Aficio SPC430DN Color Printer Series *RICOHSPC811DN Ricoh Aficio SPC811DN Color Printer Series *WORKIO_BL Panasonic WORKiO DP-23xx Series Printer Panasonic WORKiO DP-30xx Series Printer *WORKIO_BM Panasonic WORKiO DP-35xx Series Printer *WORKIO_CR Panasonic WORKiO DP-Cxxx Series Color Printer *XRX4215MRP Xerox 4215/MRP (HP Mode) *XRX4219MRP Xerox 4219/MRP (HP Mode) *XRX4220MRP Xerox 4220/MRP (HP Mode) *XRX4230MRP Xerox 4230/MRP (HP Mode) *XRX4235 Xerox 4235 LaserPrinting (HP Mode) *XRX4700II Xerox 4700 II Color Document Printer (HP Mode) *WSCSTA3 Printer not listed (A3-sized paper) *WSCSTA4 Printer not listed (A4-sized paper) *WSCSTA5 Printer not listed (A5-sized paper) *WSCSTB4 Printer not listed (B4-sized paper) *WSCSTB5 Printer not listed (B5-sized paper) *WSCSTCONT80 Printer not listed (8 inch continuous forms) *WSCSTCONT132 Printer not listed (13.2 inch continuous forms) *WSCSTEXECUTIVE Printer not listed (executive-sized paper) *WSCSTLEDGER Printer not listed (ledger-sized paper) *WSCSTLEGAL Printer not listed (legal-sized paper) *WSCSTLETTER Printer not listed (letter-sized paper) *WSCSTNONE Printer not listed (paper size not specified) *WSCST Printer not listed
Top |
Paper source 1 (PPRSRC1)
Specifies the type of paper used in paper source one.
- *MFRTYPMDL
The system uses the suggested setting for this printer.
- *LETTER
The paper for this source is letter-sized (8.5 x 11 inches).
- *LEGAL
The paper for this source is legal-sized (8.5 x 14 inches).
- *LEDGER
The paper for this source is ledger-sized (11 x 17 inches).
- *EXECUTIVE
The paper for this source is executive-sized (7.25 x 10.5 inches).
- *A3
The paper for this source is A3-sized (297mm x 420mm).
- *A4
The paper for this source is A4-sized (210mm x 297mm).
- *A5
The paper for this source is A5-sized (148 x 210mm).
- *B4
The paper for this source is B4-sized (257mm x 364mm).
- *B5
The paper for this source is B5-sized (182 x 257mm).
- *CONT80
The paper for this source is continuous form (8.0 inches).
- *CONT132
The paper for this source is continuous form (13.2 inches).
- *NONE
No paper source number one is specified.
Top |
Paper source 2 (PPRSRC2)
Specifies the type of paper used in paper source two.
- *MFRTYPMDL
The system uses the suggested setting for this printer.
- *LETTER
The paper for this source is letter-sized (8.5 x 11 inches).
- *LEGAL
The paper for this source is legal-sized (8.5 x 14 inches).
- *LEDGER
The paper for this source is ledger-sized (11 x 17 inches).
- *EXECUTIVE
The paper for this source is executive-sized (7.25 x 10.5 inches).
- *A3
The paper for this source is A3-sized (297mm x 420mm).
- *A4
The paper for this source is A4-sized (210mm x 297mm).
- *A5
The paper for this source is A5-sized (148 x 210mm).
- *B4
The paper for this source is B4-sized (257mm x 364mm).
- *B5
The paper for this source is B5-sized (182 x 257mm).
- *NONE
No paper source number one is specified.
Top |
Envelope source (ENVELOPE)
Specifies the type of envelopes used in the third paper source.
- *MFRTYPMDL
The system uses the suggested setting for this printer.
- *MONARCH
The envelopes for this source are monarch-sized (3.875 x 7.5 inches).
- *NUMBER9
The envelopes for this source are number 9-sized (3.875 x 8.875 inches).
- *NUMBER10
The envelopes for this source are number 10-sized (4.125 x 9.5 inches).
- *B5
The envelopes for this source are B5-sized (176mm x 250mm).
- *C5
The envelopes for this source are C5-sized (162mm x 229mm).
- *DL
The envelopes for this source are DL-sized (110mm x 220mm).
- *NONE
No envelope source is specified.
Top |
ASCII code page 899 support (ASCII899)
Specifies whether the printer has ASCII code page 899 installed.
- *NO
The printer does not have ASCII code page 899 installed.
- *YES
The printer has ASCII code page 899 installed.
Top |
Image configuration (IMGCFG)
Specifies the image configuration for this printer. An image configuration object provides transform services for a variety of image and print datastream formats.
- *NONE
No image configuration specified.
- image-configuration
Specify image configuration for a printer.
The following lists include the image configuration objects provided and suggested image configuration objects for many popular printers.
Image Configuration Object Table
-------------- HP PCL Datastream ------------------------ *IMGA01 PCL 300-dpi printer *IMGA02 PCL 600-dpi printer *IMGA03 PCL 1200-dpi printer *IMGA04 PCL 300-dpi color printer *IMGA05 PCL 600-dpi color printer *IMGA06 PCL 1200-dpi color printer *IMGA07 PCL 75-dpi printer (No compression) *IMGA08 PCL 600-dpi color printer with larger no-print border *IMGA09 PCL 300-dpi printer (No compression) ------------- Postscript Datastream ---------------------- *IMGB01 Postscript 300-dpi printer *IMGB02 Postscript 600-dpi printer *IMGB03 Postscript 1200-dpi printer *IMGB04 Postscript 300-dpi color printer *IMGB05 Postscript 600-dpi color printer *IMGB06 Postscript 1200-dpi color printer *IMGB07 Postscript 600x300-dpi color printer *IMGB08 Postscript 1200x300-dpi color printer *IMGB09 Postscript 360-dpi color printer *IMGB10 Postscript 720-dpi color printer *IMGB11 Postscript 1440x720-dpi color printer *IMGB12 Postscript 400-dpi printer *IMGB13 Postscript 800-dpi color printer *IMGB14 Postscript 600-dpi color printer with larger no-print border *IMGB15 Postscript 300-dpi color printer with larger no-print border ----------------- IPDS Datastream ------------------------- *IMGC01 IPDS 240-dpi printer *IMGC02 IPDS 300-dpi printer *IMGC03 IPDS 600-dpi printer *IMGC04 IPDS 1200-dpi printer *IMGC05 IPDS 240-dpi printer with no-print border *IMGC06 IPDS 300-dpi printer with no-print border *IMGC07 IPDS 600-dpi printer with no-print border *IMGC08 IPDS 1200-dpi printer with no-print border *IMGC09 IPDS 240-dpi printer (IM/1 image only) *IMGC10 IPDS 240-dpi printer with no-print border (IM/1 image only) *IMGC11 IPDS 240-dpi printer (CCITT G4 compression) ------------- PCL and Postscript Datastreams --------------- *IMGD01 PCL/Postscript 300-dpi printer *IMGD02 PCL/Postscript 600-dpi printer *IMGD03 PCL/Postscript 1200-dpi printer *IMGD04 PCL/Postscript 300-dpi color printer *IMGD05 PCL/Postscript 600-dpi color printer *IMGD06 PCL/Postscript 1200-dpi color printer *IMGD07 PCL 300-dpi/Postscript 600-dpi printer *IMGD08 PCL 300-dpi/Postscript 1200-dpi printer *IMGD09 PCL 600-dpi/Postscript 300-dpi printer *IMGD10 PCL 600-dpi/Postscript 1200-dpi printer *IMGD11 PCL/Postscript 600-dpi color printer with larger no-print border
Recommended Image Configuration Objects by Printer Table
Compaq Pagemarc 20 *IMGD01 Epson EPCL-4 Printer *IMGA01 Epson EPCL-5 Printer *IMGA02 Epson Stylus Photo with Postscript *IMGB10 Epson Stylus Color 600, 800 with Postscript *IMGB11 HP Color Laserjet 5 *IMGA04 HP Color Laserjet 5M *IMGD04 HP Deskjet 560C, 820C, 1200C *IMGA04 HP Deskjet 500, 600, 1200 *IMGA01 HP Deskjet 1600C, 1600CN *IMGA04 HP Deskjet 1600CM *IMGD04 HP Laserjet II, IID, IIP *IMGA09 HP Laserjet II, IID, IIP with Postscript *IMGB01 HP Laserjet III, IIID, IIISi, 4L *IMGA01 HP Laserjet III, IIID, IIISi, 4L with Postscript *IMGD01 HP Laserjet 4, 4P, 4V, 4Si, 4 Plus *IMGA02 HP Laserjet 4M, 4MP, 4MV, 4Si MX, 4M Plus *IMGD02 HP Laserjet 5, 5P, 5Si *IMGA02 HP Laserjet 5M, 5MP, 5Si MX *IMGD02 HP Laserjet 6, 6P, 6L *IMGA02 HP Laserjet 6M, 6MP *IMGD02 IBM 3112, 3116 Page Printer with IPDS feature *IMGD02 IBM 3112, 3116 Page Printer (ASCII/LAN) *IMGA02 IBM 3112, 3116 Page Printer with Postscript *IMGD02 IBM 3130, 3160-1 AF Printer (240-pel mode) *IMGC01 IBM 3130 AF Printer (300-pel mode) *IMGC02 IBM Infoprint 20 with IPDS feature *IMGC02 IBM Infoprint 20 (ASCII) *IMGA02 IBM Infoprint 32 with IPDS feature *IMGC02 IBM Infoprint 32 (ASCII) *IMGA02 IBM Infoprint 60 *IMGC03 IBM Infoprint 62 Model 2 *IMGC05 IBM Infoprint 62 Model 3 *IMGC06 IBM InfoColor 70 *IMGB05 IBM Infoprint 4000 *IMGC05 IBM Infoprint 4000 High Resolution *IMGC06 IBM 3825, 3827, 3828 AF Printer *IMGC09 IBM 3825, 3827, 3828 AF Printer (with AFIG) *IMGC01 IBM 3829 AF Printer *IMGC01 IBM 3835-001 AF Printer *IMGC10 IBM 3835-001 AF Printer (with AFIG) *IMGC05 IBM 3835-002, 3900 AF Printer *IMGC05 IBM 3912, 3916 Page Printer (ASCII/LAN) *IMGA01 IBM 3912, 3916 Page Printer with IPDS feature (twinax) *IMGC06 IBM 3930-02 Page Printer (IPDS diskette) *IMGC01 IBM 3930-03 Page Printer *IMGA01 IBM 3930-03 Page Printer with Postscript *IMGD01 IBM 3935 AF Printer *IMGC02 IBM 4019 LaserPrinters (HP mode) *IMGA09 IBM 4019 LaserPrinters with Postscript *IMGB01 IBM 4028 LaserPrinters *IMGC06 IBM 4029 LaserPrinters *IMGA01 IBM 4029 LaserPrinters with Postscript *IMGB02 IBM 4039 LaserPrinters *IMGA01 IBM 4039 LaserPrinters with Postscript *IMGD07 IBM 4049 LaserPrinters *IMGA02 IBM 4049 LaserPrinters with Postscript *IMGD02 IBM 4079 Color Jetprinter PS *IMGB09 IBM 4303 Network Color Printer *IMGB05 IBM 4312, 4317, 4324 NP with IPDS feature (twinax) *IMGC06 IBM 4312, 4317, 4324 NP with IPDS feature (LAN) *IMGC06 IBM 4312, 4317, 4324 NP (ASCII/LAN) *IMGA02 IBM 4312, 4317, 4324 NP with Postscript (ASCII/LAN) *IMGD02 Lexmark 4039Plus *IMGB02 Lexmark Optra C Color Printer *IMGD11 Lexmark Optra E, E+ *IMGA02 Lexmark Optra N *IMGD02 Lexmark Optra R+, Rx+, Lx+, Lxn+ *IMGD02 Lexmark Optra S Printers *IMGD02 Lexmark Optra SC Color Printer *IMGD05 Okidata OL400 LED Page Printer *IMGA01 Okidata OL800, OL810 LED Page Printers *IMGA02 QMS 2025, 3225 *IMGB12 QMS Magicolor CX *IMGD04 Tektronix Phaser 140 *IMGB09 Tektronix Phaser 300 *IMGB04 Tektronix Phaser 400 *IMGB05 Tektronix Phaser 540, 550 *IMGB05 Tektronix Phaser 560 *IMGB06 Xerox 4219/MRP *IMGA01 Xerox 4220/MRP *IMGA02 Xerox 4230 DocuPrinter *IMGA02 Xerox 4512, 4517 Network Printer *IMGA02 Xerox 4520mp Printer *IMGB13 Xerox 4700 II Color Document Printer *IMGD04 Xerox 4915 Color Laser Printer *IMGB08 Xerox 4920, 4925 Color Laser Printer *IMGB05
Top |
Maximum pending requests (MAXPNDRQS)
Specifies the maximum number of print requests that may be queued for printers. This parameter is used only if *YES is specified for the Advanced function printing (AFP) parameter.
- 6
Up to 6 print requests can be queued.
- maximum-print-requests
Specify a number from 1 to 31, indicating the maximum number of print requests that can be queued.
Top |
Print while converting (PRTCVT)
Specifies whether a file using AFP must be completely converted to IPDS before printing can begin.
- *YES
Printing begins prior to complete IPDS conversion.
- *NO
Printing does not begin prior to complete IPDS conversion.
Top |
Print request timer (PRTRQSTMR)
Specifies the number of seconds to wait, after a print request has been sent to a printer using continuous forms, before the last pages of the output are forced out of the printer into the paper stacker. This parameter is used only if *YES is specified for the Advanced function printing (AFP) parameter and *CONT is specified for the Form feed (FORMFEED) parameter.
- *NOMAX
No timer is used.
- print-request-timer
Specify the number of seconds, from 1 to 3600, to wait after a print request has been sent before forcing the last pages of the output out of the printer.
Top |
Form definition (FORMDF)
Specifies the name of the form definition to be used in the absence of any other form definition specification for a print request. This parameter is used only if *YES is specified for the Advanced function printing (AFP) parameter.
- F1C10110
Use form definition F1C10110.
- form-definition-name
Specify the name of the form definition to be used.
- *LIBL
- All libraries in the library list for the current thread are searched until the first match is found.
- *CURLIB
- The current library for the job is used to locate the form definition. If no current library exists in the library list, QGPL is used.
- library-name
- Specify the library where the form definition is located.
Top |
Character identifier (CHRID)
Specifies, for printers, the character identifier (graphic character set and code page) indicating which font is used to print the job and file separator pages when no separator page font is explicitly specified. This parameter is used only if *YES is specified for the Advanced function printing (AFP) parameter and *APPC is specified for the AFP attachment (AFPATTACH) parameter, or if *YES is specified for the Host print transform (TRANSFORM) parameter.
- *SYSVAL
- The system determines the graphic character set and code page values for the command parameters from the QCHRID system value.
Element 1: Character Set
- graphic-character-set
Specify the graphic character set values that match the attributes of this printer. Valid values range from 1 through 32767.
Element 2: Code Page
- code-page
Specify the code page set values that match the attributes of the printer. Valid values range from 1 through 32767.
Top |
Remote location (RMTLOCNAME)
Specifies the remote location name of the printer device. This value may be an SNA network ID and control point name, an internet protocol (IP) host name, or an internet address.
An SNA remote location name is specified using the format nnnnnnnn.cccccccc, where nnnnnnnn is the network ID and cccccccc is the control point name. If only the control point name is specified, the RMTNETID parameter value is used as the value of the network ID.
An IP remote location name must be from 1 to 255 characters in length.
Note: This parameter is valid if AFP(*YES) and AFPATTACH(*APPC) both are specified, or when LANATTACH(*IP) or LANATTACH(*USRDFN) is specified. This parameter is required when APPTYPE(*APPINIT) is specified. The remote location name for an APPTYPE(*APPINIT) device is the Virtual Telecommunications Access Method/IBM Network Control Program (VTAM/NCP) name of the physical device.
- remote-location-name
Specify the remote location name, remote system name, or internet address.
Top |
Local location (LCLLOCNAME)
Specifies the local location name. This parameter is valid only when AFP(*YES) and AFPATTACH(*APPC) are specified, or when APPTYPE(*APPINIT) is specified. The local location name for an APPTYPE(*APPINIT) device is the name of the independent logical unit (LU) in the IBM Network Control Program (NCP).
- *NETATR
- The LCLLOCNAME value specified in the system network attributes is used.
- local-location-name
Specify the local location name.
Top |
Mode (MODE)
Specifies the name of the mode used to define the session limits and session characteristics for this device.
- QSPWTR
The mode which exists specifically for use with printers.
- *NETATR
- The mode in the network attributes is used.
- mode-name
Specify the name of the mode description to be used by this device.
Top |
DBCS feature (IGCFEAT)
Specifies which double-byte character set (DBCS) table is used in DBCS feature code format expressing device features and the last code point value. The table at the end of this parameter description shows valid device features and last code point values for DBCS-capable devices.
Note: This parameter is valid for DBCS-capable devices only.
Element 1: Features of the DBCS-Capable Devices
- device-features
Specify the device character resolution, language, and relative buffer size device features using the format SSSSLR, where:
- SSSS =
- The resolution (number of matrix points used to create) of the character. For example, 2424 would be 24 matrix points of height and 24 matrix points of width available to formulate the character.
- L =
- The language code. The 4 language codes currently supported are:
- J = Japanese
- K = Korean
- C = Traditional Chinese
- S = Simplified Chinese
- R =
- The relative buffer size. The valid values are: 0, 1, 2, and 4.
Element 2: Last Code Point
- last-code-point
Specify the 4-digit code point of the last double-byte character. This value can be blank.
Top |
User-defined options (USRDFNOPT)
Specifies, for spooled output only, one or more user-defined options to be used by user applications or user-specified programs that process spooled files. A maximum of four user-defined options can be specified.
- *NONE
No user-defined option is specified.
- user-defined-option
Specify the user-defined option to be used by user applications that process spooled files. All characters are acceptable.
Top |
User-defined object (USRDFNOBJ)
Specifies, for spooled output only, the user-defined object to be used by user applications or user-specified programs that process spooled files.
The possible Name of User-Defined Object values are:
- *NONE
No user-defined object name is specified.
- user-defined-object-name
Specify the name of the user-defined object to be used by user applications or user-specified programs that process spooled files.
Element 1: Object
Qualifier 1: Object
- name
- Specify the name of the user-defined object.
Qualifier 2: Library
- *LIBL
- All libraries in the library list for the current thread are searched until the first match is found.
- *CURLIB
- The current library for the thread is searched. If no library is specified as the current library for the thread, the QGPL library is searched.
- name
- Specify the name of the library to be searched.
Element 2: Object type
- object-type
- The user object type can be one of the following:
- *DTAARA (Data Area)
- *DTAQ (Data Queue)
- *FILE (File)
- *PSFCFG (PSF Configuration)
- *USRIDX (User Index)
- *USRQ (User Queue)
- *USRSPC (User Space)
Top |
Data transform program (USRDTATFM)
Specifies the user-defined data program that is used to transform the spooled file data.
Notes:
- This parameter must be *NONE when AFP(*YES) is specified.
- This parameter must be *NONE when TRANSFORM(*YES) is specified.
- *NONE
No user-defined data transform program name is specified.
- user-defined-data-transform-program-name
Specify the name of a user-defined data transform program.
The possible library values are:
- *LIBL
- All libraries in the library list for the current thread are searched until the first match is found.
- *CURLIB
- The current library for the thread is searched. If no library is specified as the current library for the thread, the QGPL library is searched.
- name
- Specify the name of the library to be searched.
Top |
User-defined driver program (USRDRVPGM)
Specifies the qualified name of a user-defined driver program.
Note: This parameter is not valid when AFP(*YES) is specified, or when DEVCLS(*LAN), TYPE(3812) and LANATTACH(*IP) are specified.
- *NONE
No user-defined driver program is specified.
- user-defined-driver-program-name
Specify the name of a user-defined driver program.
The possible library values are:
- *LIBL
- All libraries in the library list for the current thread are searched until the first match is found.
- *CURLIB
- The current library for the thread is searched. If no library is specified as the current library for the thread, the QGPL library is searched.
- name
- Specify the name of the library to be searched.
Top |
System driver program (SYSDRVPGM)
Specifies the name of a system-defined driver program, which provides the capability for sending IBM i printer output to a printer attached over a TCP/IP network.
Note: This parameter is only valid when DEVCLS(*LAN), TYPE(3812) and LANATTACH(*IP) are specified.
- *HPPJLDRV
An HP-compatible printer driver program is used.
- *IBMPJLDRV
An IBM network printer driver program is used.
- *NETSTNDRV
A network station driver program is used.
- *IBMSNMPDRV
An IBM SNMP printer driver program is used.
- *IBMIPPDRV
An IBM IPP printer driver program is used.
Top |
Secure connection (SECURECNN)
Specifies whether a secure connection is established with the printer. A secure connection provides an encrypted communications session to ensure print data that passes over the connection remains private.
Note: This parameter is only valid when SYSDRVPGM(*IBMIPPDRV) is specified.
- *NO
The connection with the printer is not secure.
- *YES
The connection with the printer is secure. The printer must support SSL(Secure Sockets Layer) or TLS(Transport Layer Security) and must have a system digital certificate. More information about the secure connections can be found in the Printer Device Programming book.
Top |
Validation list (VLDL)
Specifies a validation list that is used is the printer requests authentication. The validation list is checked for the name of the user who created the spooled file, the name of the printer device, or the name of the system. Authentication information associated with the name is returned to the printer. More information about building a validation list can be found in the Printer Device Programming book.
Note: This parameter is only valid when SYSDRVPGM(*IBMIPPDRV) is specified.
- *NONE
No validation list is specified.
- validation-list-object
Specify the name of the validation list which contains authentication information.
- *LIBL
- All libraries in the library list for the current thread are searched until the first match is found.
- *CURLIB
- The current library for the thread is searched. If no library is specified as the current library for the thread, the QGPL library is searched.
- name
- Specify the name of the library to be searched.
Top |
SNMP user name (SNMPUSR)
The name of the SNMP user. The user name has no direct correlation to an IBM i user profile. Refer to the Add User for SNMP (ADDUSRSNMP) command for more information.
Note: This parameter is only valid when DEVCLS(*LAN), and SYSDRVPGM(*IBMSNMPDRV) or LANATTACH(*USRDFN) are specified.
- *NONE
- No name is specified.
- character-value
- A name must be a minimum of 1 character and no more than 32 characters in length. A name cannot contain any leading or imbedded blanks.
Top |
SNMP context name (SNMPCNTX)
The name of the SNMP context. Not all SNMP agents require a context name to be specified.
Note: This parameter is only valid when DEVCLS(*LAN), and SYSDRVPGM(*IBMSNMPDRV) or LANATTACH(*USRDFN) are specified.
- *NONE
- No name is specified.
- character-value
- A name must be a minimum of 1 character and no more than 32 characters in length. A name cannot contain any leading or imbedded blanks.
Top |
Publishing information (PUBLISHINF)
Specifies information about the printer device that could be published to a Lightweight Directory Access Protocol (LDAP) directory.
Element 1: Support Duplex
Specifies whether the printer supports printing on both sides of a sheet of paper.
- *UNKNOWN
- The value for this field is unknown.
- *SIMPLEX
- The printer device only supports printing on one side of a sheet of paper.
- *DUPLEX
- The printer device supports printing on both sides of a sheet of paper.
Element 2: Support Color
Specifies whether the printer device supports color ink printing.
- *UNKNOWN
- The value for this field is unknown.
- *COLOR
- The printer device does support color ink printing.
- *NOCOLOR
- The printer device does not support color ink printing.
Element 3: Pages per minute black
The number of pages per minute in black ink that the printer device can produce.
- *UNKNOWN
- The value for this field is unknown.
- pages-count-black
- The number of pages per minute in black ink that the printer device can produce. This field is an integer value ranging from 1 to 32767.
Element 4: Pages Per Minute Color
The number of pages per minute in color ink that the printer device can produce.
Note: The number of pages per minute in color ink is valid only when *COLOR is specified for element 2.
- *UNKNOWN
- The value for this field is unknown.
- page-count-color
- The number of pages per minute in color ink that the printer device can produce. This field is an integer value ranging from 1 to 32767.
Element 5: Location
Briefly describes the location of the printer device.
- *BLANK
- The location of the printer device is not specified.
- location
- Specify no more than 30 characters of text, enclosed in apostrophes, to describe where the printer is located.
Element 6: Data Streams Supported
Specifies the data stream formats supported by the printer device.
- *UNKNOWN
- The value for this field is unknown.
- *PCL
- The printer device supports PCL (Printer Command Language).
- *PS
- The printer device supports PostScript.
- The printer device supports PDF (Portable Document Format).
- *IPDS
- The printer device supports IPDS (Intelligent Printer Data Stream).
- *SCS
- The printer device supports SCS (SNA Character String).
Top |
Text 'description' (TEXT)
Specifies the text that briefly describes the object.
- *BLANK
- No text is specified.
- character-value
- Specify no more than 50 characters of text, enclosed in apostrophes.
Top |
Dependent location name (DEPLOCNAME)
Specifies the dependent local location name used for Dependent LU Requester (DLUR), providing additional security for the connection. If this name is filled in, an activation request (SNA ACTLU) from a Dependent LU Server (DLUS) node must reference this name or it is rejected.
Remote DLUS nodes may optionally accept unsolicited reply PSIDs (Product Set IDs) from the IBM i for auto-definition of LUs at the DLUS node. If so, then this name will be sent to the DLUS node in the reply PSID and it will be returned on the ACTLU request.
If unsolicited reply PSIDs are not supported by the DLUS node, then there will have to be close coordination of the PU name definitions on both systems.
- *NONE
No location name is defined.
- dependent-location-name
Specify the dependent location name used for DLUR applications.
Top |
Remote network identifier (RMTNETID)
Specifies the identifier (ID) of the remote network. This parameter is required when AFP(*YES) and AFPATTACH(*APPC) are specified, or when APPTYPE(*APPINIT) is specified.
- *NETATR
- The remote network identifier specified in the network attributes is used.
- *NONE
No remote network identifier (ID) is used.
- remote-network-ID
Specify the ID of the remote network.
Top |
Workstation customizing object (WSCST)
Specifies the qualified name of a work station customizing object.
- *NONE
No work station customizing object is specified.
- work-station-customizing-object
Specify the work station customizing object.
Note: If a work station customizing object is specified for the WSCST parameter, all country keyboard identifiers are valid for ASCII devices except for the following: FQB, FQI, INB, INI, JEB, JEI, JKB, JUB, KAB, KOB, RCB, and TAB.
The possible library values are:
- *LIBL
- All libraries in the library list for the current thread are searched until the first match is found.
- *CURLIB
- The current library for the thread is searched. If no library is specified as the current library for the thread, the QGPL library is searched.
- library-name
- Specify the library where the object is located.
Top |
Authority (AUT)
Specifies the authority you are giving to users who do not have specific authority for the object, who are not on an authorization list, and whose group profile or supplemental group profiles do not have specific authority for the object.
- *CHANGE
- The user can perform all operations on the object except those limited to the owner or controlled by object existence (*OBJEXIST) and object management (*OBJMGT) authorities. The user can change and perform basic functions on the object. *CHANGE authority provides object operational (*OBJOPR) authority and all data authority. If the object is an authorization list, the user cannot add, change, or remove users.
- *ALL
- The user can perform all operations except those limited to the owner or controlled by authorization list management (*AUTLMGT) authority. The user can control the object's existence, specify the security for the object, change the object, and perform basic functions on the object. The user also can change ownership of the object.
- *USE
- The user can perform basic operations on the object, such as running a program or reading a file. The user cannot change the object. Use (*USE) authority provides object operational (*OBJOPR), read (*READ), and execute (*EXECUTE) authorities.
- *EXCLUDE
- The user cannot access the object.
- *LIBCRTAUT
- The system determines the authority for the object by using the value specified for the Create authority (CRTAUT) parameter on the Create Library (CRTLIB) command for the library containing the object to be created. If the value specified for the CRTAUT parameter is changed, the new value will not affect any existing objects.
- name
- Specify the name of an authorization list to be used for authority to the object. Users included in the authorization list are granted authority to the object as specified in the list. The authorization list must exist when the object is created.
Top |
Examples
Example 1: Creating a LAN Printer Device Description
CRTDEVPRT DEVD(PRT2) DEVCLS(*LAN) TYPE(3812) MODEL(1) ADPTADR(999999999999) FONT(011) MFRTYPMDL(*IBM3812)
This command creates a device description for a LAN printer named PRT2. It is a 3812 Model 1 Printer attached to IBM 3812 Pageprinter. It has an adapter address of 999999999999 and uses the Courier font.
Example 2: Creating a LAN Printer Device Description using a SNMP user name
CRTDEVPRT DEVD(LANPRT) DEVCLS(*LAN) TYPE(3812) MODEL(1) LANATTACH(*IP) PORT(9100) ONLINE(*YES) FONT(11 *NONE) FORMFEED(*AUTOCUT) INACTTMR(*SEC15) TRANSFORM(*YES) MFRTYPMDL(*HP5) CHRID(*SYSVAL) RMTLOCNAME('10.9.100.1') SYSDRVPGM(*IBMSNMPDRV) SNMPUSR(BOB)
This command creates a device description for a LAN printer named LANPRT. It is a 3812 Model 1 Printer attached to IBM 3812 Pageprinter. It is attached using an IP address and has an SNMP user name specified.
Top |
Error messages
*ESCAPE Messages
- CPDB12C
- Remote location name &2 not in correct format.
- CPF261A
- Device description &1 not created due to errors.
- CPF2631
- Device type &2 not valid.
- CPDB1B8
- Combination of parameters not valid. Reason code is &2.
Top |