Specify the HMC information for the setup source and setup copy LPARs. The LPARs can be managed by the same HMC or by different HMCs.
If your LPARs are managed by different HMCs, click No to open additional input fields.
After you have specified the HMC address, user, and password, click Select to retrieve the LPAR list from the HMC.
Note: HMC REST services are used by Db2® Mirror during the setup and configuration process. The HMC REST services are provided through https, which may require Db2 Mirror to install a certificate. You will see the dialog shown below before the certificate is installed. Verify the certificate information before clicking OK to add the certificate.
The LPARs are grouped by the names of the Power® systems managed by the HMC. If there is only one Power system managed by the HMC, then the list will be expanded by default. Otherwise, the lists are collapsed as shown below.
Select your source and copy LPARs. The OK button will be enabled when both source and copy LPARs have been selected, as shown below.
Click OK to proceed.
Note: If you are using the setup wizard to reconfigure a Db2 Mirror pair, see Reclone using the GUI Interface for more information about the reconfigure options available at this point on the reset dialog box.