Create SQL ILE RPG Object (CRTSQLRPGI)
Where allowed to run: All environments (*ALL) Threadsafe: No |
Parameters Examples Error messages |
The Create SQL ILE RPG Object (CRTSQLRPGI) command calls the Structured Query Language (SQL) precompiler which precompiles RPG source containing SQL statements, produces a temporary source member, and then optionally calls the ILE RPG compiler to create a module, create a program, or create a service program.
Top |
Parameters
Keyword | Description | Choices | Notes |
---|---|---|---|
OBJ | Object | Qualified object name | Required, Positional 1 |
Qualifier 1: Object | Name | ||
Qualifier 2: Library | Name, *CURLIB | ||
SRCFILE | Source file | Qualified object name | Optional, Positional 2 |
Qualifier 1: Source file | Name, QRPGLESRC | ||
Qualifier 2: Library | Name, *LIBL, *CURLIB | ||
SRCMBR | Source member | Name, *OBJ | Optional, Positional 3 |
SRCSTMF | Source stream file | Path name | Optional |
COMMIT | Commitment control | *CHG, *ALL, *CS, *NONE, *RR, *UR, *RS, *NC | Optional |
RDB | Relational database | Simple name, *LOCAL, *NONE | Optional |
OBJTYPE | Compile type | *PGM, *SRVPGM, *MODULE | Optional |
OUTPUT | Listing output | *NONE, *PRINT | Optional |
TEXT | Text 'description' | Character value, *SRCMBRTXT, *BLANK | Optional |
USER | RDB user | Name, *CURRENT | Optional |
PASSWORD | RDB user password | Character value, *NONE, ' ' | Optional |
OPTION | Precompiler options | Values (up to 14 repetitions): *XREF, *NOXREF, *GEN, *NOGEN, *COMMA, *PERIOD, *JOB, *SYSVAL, *SECLVL, *NOSECLVL, *SEQSRC, *NOSEQSRC, *EVENTF, *NOEVENTF, *CVTDT, *NOCVTDT, *SQL, *SYS, *OPTLOB, *NOOPTLOB, *NOEXTIND, *EXTIND | Optional |
RPGPPOPT | RPG preprocessor options | *NONE, *LVL1, *LVL2 | Optional |
TGTRLS | Target release | Simple name, *CURRENT, *PRV | Optional |
INCFILE | INCLUDE file | Qualified object name | Optional |
Qualifier 1: INCLUDE file | Name, *SRCFILE | ||
Qualifier 2: Library | Name, *LIBL, *CURLIB | ||
INCDIR | SQL INCLUDE directory | Path name, *NONE | Optional |
ALWCPYDTA | Allow copy of data | *OPTIMIZE, *YES, *NO | Optional |
CLOSQLCSR | Close SQL cursor | *ENDACTGRP, *ENDMOD | Optional |
ALWBLK | Allow blocking | *ALLREAD, *NONE, *READ | Optional |
DLYPRP | Delay PREPARE | *NO, *YES | Optional |
CONACC | Concurrent access resolution | *DFT, *CURCMT, *WAIT | Optional |
GENLVL | Severity level | 0-40, 10 | Optional |
DATFMT | Date format | *JOB, *USA, *ISO, *EUR, *JIS, *MDY, *DMY, *YMD, *JUL | Optional |
DATSEP | Date separator character | *JOB, '/', '.', ',', '-', ' ', *BLANK | Optional |
TIMFMT | Time format | *HMS, *USA, *ISO, *EUR, *JIS | Optional |
TIMSEP | Time separator character | *JOB, ':', '.', ',', ' ', *BLANK | Optional |
REPLACE | Replace | *YES, *NO | Optional |
RDBCNNMTH | RDB connect method | *DUW, *RUW | Optional |
DFTRDBCOL | Default collection | Name, *NONE | Optional |
DYNDFTCOL | Dynamic default collection | *NO, *YES | Optional |
SQLPKG | Package | Qualified object name | Optional |
Qualifier 1: Package | Name, *OBJ | ||
Qualifier 2: Library | Name, *OBJLIB | ||
SQLPATH | SQL path | Single values: *NAMING, *LIBL Other values (up to 268 repetitions): Name |
Optional |
SQLCURRULE | SQL rules | *DB2, *STD | Optional |
SAAFLAG | IBM SQL flagging | *NOFLAG, *FLAG | Optional |
FLAGSTD | ANS flagging | *NONE, *ANS | Optional |
PRTFILE | Print file | Qualified object name | Optional |
Qualifier 1: Print file | Name, QSYSPRT | ||
Qualifier 2: Library | Name, *LIBL, *CURLIB | ||
DBGVIEW | Debugging view | *NONE, *SOURCE | Optional |
DBGENCKEY | Debug encryption key | Character value, *NONE | Optional |
USRPRF | User profile | *NAMING, *USER, *OWNER | Optional |
DYNUSRPRF | Dynamic user profile | *USER, *OWNER | Optional |
SRTSEQ | Sort sequence | Single values: *JOB, *HEX, *JOBRUN, *LANGIDUNQ, *LANGIDSHR Other values: Qualified object name |
Optional |
Qualifier 1: Sort sequence | Name | ||
Qualifier 2: Library | Name, *LIBL, *CURLIB | ||
LANGID | Language id | Character value, *JOB, *JOBRUN | Optional |
TOSRCFILE | To source file | Qualified object name | Optional |
Qualifier 1: To source file | Name, QSQLTEMP1 | ||
Qualifier 2: Library | Name, QTEMP, *LIBL, *CURLIB | ||
DECRESULT | Decimal result options | Element list | Optional |
Element 1: Maximum precision | 31, 63 | ||
Element 2: Maximum scale | 0-63, 31 | ||
Element 3: Minimum divide scale | 0-9, 0 | ||
DECFLTRND | Decimal float rounding mode | *HALFEVEN, *HALFUP, *DOWN, *CEILING, *FLOOR, *HALFDOWN, *UP | Optional |
COMPILEOPT | Compiler options | Character value, *NONE | Optional |
Top |
Object (OBJ)
Specifies the object to be created.
This is a required parameter.
Qualifier 1: Object
- name
- Specify the name of the object to be created.
Qualifier 2: Library
- *CURLIB
- The new object is created in the current library for the job. If no library is specified as the current library for the job, the QGPL library is used.
- name
- Specify the name of the library where the object is created.
Top |
Source file (SRCFILE)
Specifies the source file that contains the RPG source statements and SQL statements.
Qualifier 1: Source file
- QRPGLESRC
- Source file QRPGLESRC contains the RPG source.
- name
- Specify the name of the source file that contains the RPG source.
Qualifier 2: Library
- *LIBL
- All libraries in the job's library list are searched until the first match is found.
- *CURLIB
- The current library for the job is searched. If no library is specified as the current library for the job, the QGPL library is used.
- name
- Specify the name of the library to be searched.
Top |
Source member (SRCMBR)
Specifies the source file member that contains the input source. This parameter is used only if the source file specified for the Source file (SRCFILE) parameter is a database file.
- *OBJ
- The source file member that has the same name as the value specified for the Object (OBJ) parameter contains the input source.
- name
- Specify the name of the source file member that contains the input source.
Top |
Source stream file (SRCSTMF)
Specifies the path name to the file that contains the RPG source statements and SQL statements. The path name can be either absolute or relative.
Source text must be in positions 1 to 100. Characters after position 100 will be ignored.
If a value is specified for this parameter, the precompiler will not expand /COPY statements. If a /COPY statement needs to be expanded for the precompile, you must specify a value other than *NONE on the RPG preprocessor options (RPGPPOPT) parameter.
Top |
Commitment control (COMMIT)
Specifies whether SQL statements in the compiled program are run under commitment control. Files referred to in the host language source are not affected by this option. Only SQL tables, SQL views, SQL packages, SQL sequences, SQL aliases, SQL Types, SQL procedures, SQL functions, SQL indexes, SQL schemas, SQL triggers, and SQL views referred to in SQL statements are affected.
- *CHG or *UR
- Specifies the objects referred to in SQL ALTER, CALL, COMMENT ON, CREATE, DROP, GRANT, LABEL ON, RENAME, and REVOKE statements and the rows updated, deleted, and inserted are locked until the end of the unit of work (transaction). Uncommitted changes in other jobs can be seen.
- *CS
- Specifies the objects referred to in SQL ALTER, CALL, COMMENT ON, CREATE, DROP, GRANT, LABEL ON, RENAME, and REVOKE statements and the rows updated, deleted, and inserted are locked until the end of the unit of work (transaction). A row that is selected, but not updated, is locked until the next row is selected. Uncommitted changes in other jobs cannot be seen.
- *ALL or *RS
- Specifies the objects referred to in SQL ALTER, CALL, COMMENT ON, CREATE, DROP, GRANT, LABEL ON, RENAME, and REVOKE statements and the rows selected, updated, deleted, and inserted are locked until the end of the unit of work (transaction). Uncommitted changes in other jobs cannot be seen.
- *NONE or *NC
- Specifies that commitment control is not used. Uncommitted changes in other jobs can be seen. If the SQL DROP SCHEMA statement is included in the program, *NONE or *NC must be used. If a relational database is specified for the Relational database (RDB) parameter, and the relational database is on a system that is not on IBM i, *NONE or *NC cannot be specified.
- *RR
- Specifies the objects referred to in SQL ALTER, CALL, COMMENT ON, CREATE, DROP, GRANT, LABEL ON, RENAME, and REVOKE statements and the rows selected, updated, deleted, and inserted are locked until the end of the unit of work (transaction). Uncommitted changes in other jobs cannot be seen. All tables referred to in SELECT, UPDATE, DELETE, and INSERT statements are locked exclusively until the end of the unit of work (transaction).
Top |
Relational database (RDB)
Specifies the name of the relational database where the SQL package is to be created.
- *LOCAL
- The program is created as a distributed SQL program. The SQL statements will access the local database. An SQL package object is not created as part of the precompile process. The Create Structured Query Language Package (CRTSQLPKG) command can be used.
- *NONE
- An SQL package object is not created. The program object is not a distributed program and the Create Structured Query Language Package (CRTSQLPKG) command cannot be used.
- name
- Specify the name of the relational database where the new SQL package object is to be created. When the name of the local relational database is specified, the program created is still a distributed SQL program. The SQL statements will access the local database.
Top |
Compile type (OBJTYPE)
Specifies the type of object to be created.
When OBJTYPE(*PGM) or OBJTYPE(*SRVPGM) is specified and the Relational database (RDB) parameter is also specified, the CRTSQLPKG command is issued by the SQL precompiler after the program has been created. When OBJTYPE(*MODULE) is specified, an SQL package is not created and you must issue the CRTSQLPKG command after the CRTPGM or CRTSRVPGM command has created the program.
If OPTION(*NOGEN) is specified, only the SQL temporary source member is generated. No module, program, service program, or SQL package is created.
- *PGM
- The SQL precompiler calls the compiler to create a program.
- *MODULE
- The SQL precompiler calls the compiler to create a module.
- *SRVPGM
- The SQL precompiler calls the compiler to create a module and issues the Create Service Program (CRTSRVPGM) command to create a service program.
Top |
Listing output (OUTPUT)
Specifies whether the precompiler listing is generated.
- *NONE
- The precompiler listing is not generated.
- The precompiler listing is generated.
Top |
Text 'description' (TEXT)
Specifies text that briefly describes the program and its function.
- *SRCMBRTXT
- The text is taken from the source file member being used to create the program. If the source file is an inline file or a device file, the text is blank.
- *BLANK
- No text is specified.
- 'description'
- Specify no more than 50 characters, enclosed in apostrophes.
Top |
RDB user (USER)
Specifies the user name sent to the remote system when starting the conversation. This parameter is valid only when Relational database (RDB) is specified.
- *CURRENT
- The user name associated with the current job is used.
- name
- Specify the user name to be used for the application server job.
Top |
RDB user password (PASSWORD)
Specifies the password to be used on the remote system. This parameter is valid only when Relational database (RDB) is specified.
- *NONE
- No password is sent. A user name cannot be specified for the RDB user (USER) parameter if this value is specified.
Note: Specifying a password of a blank is the same as specifying *NONE.
- password
- Specify the password of the user name specified for the RDB user (USER) parameter.
Top |
Precompiler options (OPTION)
Specifies whether one or more of the following options are used when the RPG source is precompiled. If an option is specified more than once, or if two options conflict, the last option specified is used.
Cross reference options:
- *XREF
- The precompiler cross-references items in the program to the statement numbers in the program that refer to those items.
- *NOXREF
- The precompiler does not cross-reference names.
Object creation options:
- *GEN
- The precompiler creates the object that is specified for the Compile type (OBJTYPE) parameter.
- *NOGEN
- The precompiler does not call the RPG compiler. No module, program, service program, or SQL package is created.
Decimal point options:
- *JOB
- The representation for the decimal point specified for the job at precompile time is used.
Note: If QDECFMT specifies that the value used as the decimal point is a comma, any numeric constants in lists (such as in the SELECT clause and VALUES clause) must be separated by a comma followed by a blank. For example, VALUES(1,1, 2,23, 4,1) is equivalent to VALUES(1.1,2.23,4.1) where the decimal point is the period.
- *SYSVAL
- The value used as the decimal point in numeric constants is from the QDECFMT system value. This value is also used as the decimal point character when casting a numeric value to character.
Note: If QDECFMT specifies that the value used as the decimal point is a comma; any numeric constants in lists (such as in the SELECT clause and VALUES clause) must be separated by a comma followed by a blank. For example, VALUES(1,1, 2,23, 4,1) is equivalent to VALUES(1.1,2.23,4.1) where the decimal point is the period.
- *PERIOD
- The value used as the decimal point for numeric constants used in SQL statements is a period. This value is also used as the decimal point character when casting a numeric value to character.
- *COMMA
- The value used as the decimal point in numeric constants is a comma. Any numeric constants in lists (such as in the SELECT clause and VALUES clause) must be separated by a comma followed by a blank. For example, VALUES(1,1, 2,23, 4,1) is equivalent to VALUES(1.1,2.23,4.1) where the decimal point is the period.
Naming convention options:
- *SYS
- Specifies that the system naming convention is used (library-name/file-name).
- *SQL
- Specifies that the SQL naming convention is used (schema-name.table-name).
If a relational database is specified for the Relational database (RDB) parameter, and the database is on a system that is not IBM i, *SQL must be specified as the naming convention.
Second-level message text options:
- *NOSECLVL
- Second-level text descriptions are not added to the listing.
- *SECLVL
- Second-level text with replacement data is added for all messages on the listing.
Sequence source options:
- *NOSEQSRC
- The source file member created into QSQLTEMP1 or QSQLTEMP has the same sequence numbers as the original source read by the precompiler.
- *SEQSRC
- The source file member created into QSQLTEMP1 or QSQLTEMP contains sequence numbers starting at 000001 and incremented by 000001.
LOB optimization for DRDA options:
- *OPTLOB
- The first FETCH for a cursor determines how the cursor will be used for LOBs (Large Objects) and XML on all subsequent FETCHes. This option remains in effect until the cursor is closed.
If the first FETCH uses a LOB or XML locator to access a LOB or XML column, no subsequent FETCH for that cursor can fetch that LOB or XML column into a LOB or XML host variable.
If the first FETCH places the LOB or XML column into a LOB or XML host variable, no subsequent FETCH for that cursor can use a LOB or XML locator for that column.
- *NOOPTLOB
- There is no restriction on whether a column is retrieved into a LOB or XML locator or into a LOB or XML host variable. This option can cause performance to degrade.
Event file creation options:
- *NOEVENTF
- The compiler will not produce an event file for use by CoOperative Development Environment (CODE).
- *EVENTF
- The compiler produces an event file for use by CoOperative Development Environment (CODE). The event file will be created as a member in the file EVFEVENT in your object library. CODE uses this file to offer error feedback integrated with the CODE editor. This option is normally specified by CODE on your behalf.
Character string representation options:
- *NOCVTDT
- Specifies that date, time, and timestamp data types which are retrieved from externally-described database files are to be processed using the date, time, and timestamp data types.
- *CVTDT
- Specifies that date, time and timestamp data types, which are retrieved from externally-described database files, are to be processed as fixed-length character fields.
Extended indicators options:
- *NOEXTIND
- Extended indicator support is not enabled.
- *EXTIND
- Extended indicator support is enabled.
Top |
RPG preprocessor options (RPGPPOPT)
Specifies if the ILE RPG compiler will be called to preprocess the source member before the SQL precompile is run. Preprocessing the SQL source member will allow some compiler directives to be handled before the SQL precompile. The preprocessed source will be placed in file QSQLPRE in QTEMP. This source will be used for the SQL precompile.
- *NONE
- The compiler is not called for preprocessing.
- *LVL1
- The compiler is called for preprocessing to expand /COPY and handle the conditional compilation directives except the /INCLUDE directive.
- *LVL2
- The compiler will be called for preprocessing to expand /COPY and /INCLUDE and handle the conditional compilation directives.
Top |
Target release (TGTRLS)
Specifies the release of the operating system on which you intend to use the object being created.
When specifying the target-release value, the format VxRxMx is used to specify the release, where Vx is the version, Rx is the release, and Mx is the modification level. For example, V5R3M0 is version 5, release 3, modification 0.
Valid values depend on the current version, release, and modification level of the operating system, and they change with each new release. You can press F4 while prompting this command parameter to see a list of valid target release values.
- *CURRENT
- The object is to be used on the release of the operating system currently running on your system. The object can also be used on a system with any subsequent release of the operating system installed.
- *PRV
- The object is to be used on the previous release with modification level 0 of the operating system. The object can also be used on a system with any subsequent release of the operating system installed.
- target-release
- Specify the release in the format VxRxMx. The object can be used on a system with the specified release or with any subsequent release of the operating system installed.
Top |
INCLUDE file (INCFILE)
Specifies the source file that contains members to be included in the program with the SQL INCLUDE statement.
Single values
- *SRCFILE
- The qualified source file you specify for the Source file (SRCFILE) parameter contains the source file members specified on any SQL INCLUDE statements.
Qualifier 1: INCLUDE file
- name
- Specify the name of the source file that contains the source file members specified on any SQL INCLUDE statements.
The record length of the source file you specify here must be no less than the record length of the source file you specify for the Source file (SRCFILE) parameter.
Qualifier 2: Library
- *LIBL
- All libraries in the job's library list are searched until the first match is found.
- *CURLIB
- The current library for the job is searched. If no library is specified as the current library for the job, the QGPL library is used.
- name
- Specify the name of the library where the source file is located.
Top |
SQL INCLUDE directory (INCDIR)
Specifies the path name of the directory containing any files to be included in the program with the SQL INCLUDE statement.
Specifying a value for this parameter does not pass an INCDIR value from the SQL precompiler to the compiler. If you want to pass an INCDIR value through to the compiler, this can be done using the Compiler options (COMPILEOPT) parameter.
- *NONE
- The current directory and the source directory will be searched.
- path-name
- The path name of the directory that contains the files specified on any SQL INCLUDE statement. The current directory will be searched first, then the specified path name, then the source directory.
Top |
Allow copy of data (ALWCPYDTA)
Specifies whether a copy of the data can be used in a SELECT statement.
- *OPTIMIZE
- The system determines whether to use the data retrieved directly from the database or to use a copy of the data. The decision is based on which method provides the best performance. If the Commitment control (COMMIT) parameter is not *NONE, the Allow blocking (ALWBLK) parameter should be set to *ALLREAD, when possible, for best performance.
- *YES
- A copy of the data is used only when necessary.
- *NO
- A copy of the data is not used. If a temporary copy of the data is required to perform the query, an error message is returned.
Top |
Close SQL cursor (CLOSQLCSR)
Specifies when SQL cursors are implicitly closed, SQL prepared statements are implicitly discarded, and LOCK TABLE locks are released. SQL cursors are explicitly closed when the user issues the CLOSE, COMMIT, or ROLLBACK (without HOLD) SQL statements.
- *ENDACTGRP
- SQL cursors are closed and SQL prepared statements are implicitly discarded, and LOCK TABLE locks are released when the activation group ends.
- *ENDMOD
- SQL cursors are closed and SQL prepared statements are implicitly discarded when the module is exited. LOCK TABLE locks are released when the first SQL program on the call stack ends.
Top |
Allow blocking (ALWBLK)
Specifies whether the database manager can use record blocking and the extent to which blocking can be used for read-only cursors.
- *ALLREAD
- Rows are blocked for read-only cursors. All cursors in a program that are not explicitly able to be changed are opened for read-only processing even though there may be EXECUTE or EXECUTE IMMEDIATE statements in the program.
Specifying *ALLREAD:
- Allows record blocking for all read-only cursors.
- Can improve the performance of almost all read-only cursors in programs, but limits queries in the following ways:
- The Rollback (ROLLBACK) command, a ROLLBACK statement in host languages, or the ROLLBACK HOLD SQL statement does not reposition a read-only cursor when *ALLREAD is specified.
- Dynamic running of a positioned UPDATE or DELETE statement (for example, using EXECUTE IMMEDIATE), can not be used to update a row in a cursor unless the DECLARE statement for the cursor includes the FOR UPDATE clause.
- *NONE
- Rows are not blocked for retrieval of data for cursors.
Specifying *NONE:
- Guarantees that the data retrieved is current.
- May reduce the amount of time required to retrieve the first row of data for a query.
- Stops the database manager from retrieving a block of data rows that is not used by the program when only the first few rows of a query are retrieved before the query is closed.
- Can degrade the overall performance of a query that retrieves a large number of rows.
- *READ
- Records are blocked for read-only retrieval of data for cursors when:
- *NONE is specified for the Commitment control (COMMIT) parameter, which indicates that commitment control is not used.
- The cursor is declared with a FOR READ ONLY clause or there are no dynamic statements that could run a positioned UPDATE or DELETE statement for the cursor.
Top |
Delay PREPARE (DLYPRP)
Specifies whether the dynamic statement validation for a PREPARE statement is delayed until an OPEN, EXECUTE, or DESCRIBE statement is run. Delaying validation improves performance by eliminating redundant validation.
- *NO
- Dynamic statement validation is not delayed. When the dynamic statement is prepared, the access plan is validated. When the dynamic statement is used in an OPEN or EXECUTE statement, the access plan is revalidated. Because the authority or the existence of objects referred to by the dynamic statement may change, you must still check the SQLCODE or SQLSTATE after issuing the OPEN or EXECUTE statement to ensure that the dynamic statement is still valid.
- *YES
- Dynamic statement validation is delayed until the dynamic statement is used in an OPEN, EXECUTE, or DESCRIBE SQL statement. When the dynamic statement is used, the validation is completed and an access plan is built. If you specify *YES for this parameter for precompiled programs, you should check the SQLCODE and SQLSTATE after running an OPEN, EXECUTE, or DESCRIBE statement to ensure that the dynamic statement is valid.
Note: If you specify *YES, performance is not improved if the INTO clause is used on the PREPARE statement or if a DESCRIBE statement uses the dynamic statement before an OPEN is issued for the statement.
Top |
Concurrent access resolution (CONACC)
Specifies how the database manager should handle record lock conflicts for data in the process of being updated.
- *DFT
- Specifies that the concurrent access option will not be explicitly set for this program. The value that is in effect when the program is invoked will be used. The value can be set using the SQL_CONCURRENT_ACCESS_RESOLUTION option in the query options file QAQQINI.
- *CURCMT
- Directs the database manager to use the currently committed data when possible in the case of record lock conflicts for read-only queries. This only applies when the commit level is *CS.
- *WAIT
- Directs the database manager to wait for the outcome in the case of record lock conflicts.
Top |
Severity level (GENLVL)
Specifies whether the compiler is called, depending on the severity of messages generated as a result of errors found by the SQL precompiler. If precompiler errors are generated that have a message severity level greater than the value specified for this parameter, the compiler is not called.
If the Relational database (RDB) parameter is specified and the severity of the messages generated as a result of package creation is greater than the severity level specified for this parameter, the SQL package is not created.
- 10
- Do not call the compiler if SQL precompiler messages with a message severity greater than 10 are generated.
- 0-40
- Specify the maximum SQL precompiler message severity level to be used to control whether the compiler is called.
Top |
Date format (DATFMT)
Specifies the format used when accessing date result columns. All output date fields are returned in the format you specify. For input date strings, the value you specify is used to determine whether the date is a valid format.
Note: An input date string that uses the format *USA, *ISO, *EUR, or *JIS is always valid.
If you connect to a relational database that is on a system that is not IBM i, the format must be *USA, *ISO, *EUR, or *JIS.
- *JOB
- The format specified for the job at precompile time or when a new interactive SQL session is created is used.
Use the Display Job (DSPJOB) command to determine the current date format for the job.
- *USA
- The United States date format mm/dd/yyyy is used.
- *ISO
- The International Organization for Standardization (ISO) date format yyyy-mm-dd is used.
- *EUR
- The European date format dd.mm.yyyy is used.
- *JIS
- The Japanese Industrial Standard date format yyyy-mm-dd is used.
- *MDY
- The date format mm/dd/yy is used.
- *DMY
- The date format dd/mm/yy is used.
- *YMD
- The date format yy/mm/dd is used.
- *JUL
- The Julian date format yy/ddd is used.
Top |
Date separator character (DATSEP)
Specifies the separator to be used when accessing date result columns.
Note: This parameter applies only when *JOB, *MDY, *DMY, *YMD, or *JUL is specified for the Date format (DATFMT) parameter.
- *JOB
- The date separator specified for the job at precompile time, when a new interactive SQL session is created, or when Run SQL Statement (RUNSQLSTM) command is run.
Use the Display Job (DSPJOB) command to determine the current date separator value for the job.
- '/'
- A slash is used as the date separator.
- '.'
- A period is used as the date separator.
- '-'
- A dash is used as the date separator.
- ','
- A comma is used as the date separator.
- ' ' or *BLANK
- A blank is used as the date separator.
Top |
Time format (TIMFMT)
Specifies the format used when accessing time result columns. All output time fields are returned in the format you specify. For input time strings, the value you specify is used to determine whether the time is specified in a valid format.
Note: An input time string that uses the format *USA, *ISO, *EUR, or *JIS is always valid.
If you connect to a relational database that is on a system that is not another IBM i, the time format must be *USA, *ISO, *EUR, *JIS, or *HMS with a time separator of a colon or period.
- *HMS
- The hh:mm:ss format is used.
- *USA
- The United States time format hh:mmxx is used, where xx is AM or PM.
- *ISO
- The International Organization for Standardization (ISO) time format hh.mm.ss is used.
- *EUR
- The European time format hh.mm.ss is used.
- *JIS
- The Japanese Industrial Standard time format hh:mm:ss is used.
Top |
Time separator character (TIMSEP)
Specifies the separator used when accessing time result columns.
Note: This parameter applies only when *HMS is specified for the Time format (TIMFMT) parameter.
- *JOB
- The time separator specified for the job at precompile time, when a new interactive SQL session is created, or when RUNSQLSTM is run is used.
Use the Display Job (DSPJOB) command to determine the current time separator value for the job.
- ':'
- A colon is used as the time separator.
- '.'
- A period is used as the time separator.
- ','
- A comma is used as the time separator.
- ' ' or *BLANK
- A blank is used as the time separator.
Top |
Replace (REPLACE)
Specifies if a SQL module, program, service program or package is created when there is an existing SQL module, program, service program, or package of the same name and type in the same library. The value for this parameter is passed to the CRTRPGMOD, CRTBNDRPG, CRTSRVPGM, and CRTSQLPKG commands.
- *YES
- A new SQL module, program, service program, or package is created, any existing SQL object of the same name and type in the specified library is moved to QRPLOBJ.
- *NO
- A new SQL module, program, service program, or package is not created if an SQL object of the same name and type already exists in the specified library.
Top |
RDB connect method (RDBCNNMTH)
Specifies the semantics used for CONNECT statements.
- *DUW
- CONNECT (Type 2) semantics are used to support distributed unit of work. Consecutive CONNECT statements to additional relational databases do not result in disconnection of previous connections.
- *RUW
- CONNECT (Type 1) semantics are used to support remote unit of work. Consecutive CONNECT statements result in the previous connection being disconnected before a new connection is established.
Top |
Default collection (DFTRDBCOL)
Specifies the name of the schema identifier used for the unqualified names of the tables, views, indexes, SQL packages, aliases, constraints, external programs, node groups, and triggers. This parameter applies only to static SQL statements.
- *NONE
- The naming convention specified for the Precompiler options (OPTION) parameter is used.
- name
- Specify the name of the schema identifier to be used instead of the naming convention specified for the Precompiler options (OPTION) parameter.
Top |
Dynamic default collection (DYNDFTCOL)
Specifies whether the default schema name specified for the Default collection (DFTRDBCOL) parameter is also used for dynamic statements.
- *NO
- Do not use the value specified for the Default collection (DFTRDBCOL) parameter for unqualified names of tables, views, indexes, SQL packages, aliases, constraints, external programs, node groups, and triggers for dynamic SQL statements. The naming convention specified for the Precompiler options (OPTION) parameter is used.
- *YES
- The schema name specified for the Default collection (DFTRDBCOL) parameter will be used for the unqualified names of the tables, views, indexes, SQL packages, aliases, constraints, external programs, node groups, and triggers in dynamic SQL statements.
Top |
Package (SQLPKG)
Specifies the qualified name of the SQL package created on the relational database specified for the Relational database (RDB) parameter of this command.
Qualifier 1: Package
- *OBJ
- The name of the SQL package is the same as the object name specified for the Object (OBJ) parameter.
- name
- Specify the name of the SQL package. If the remote system is not IBM i, no more than 8 characters can be specified.
Qualifier 2: Library
- *OBJLIB
- The package is created in the library with the same name as the library specified for the Object (OBJ) parameter.
- name
- Specify the name of the library where the package is created.
Top |
SQL path (SQLPATH)
Specifies the path to be used to find procedures, functions, and user defined types in static SQL statements.
- *NAMING
- The path used depends on the naming convention specified for the Precompiler options (OPTION) parameter.
For *SYS naming, the path used is *LIBL, the current library list at runtime.
For *SQL naming, the path used is "QSYS", "QSYS2", "SYSPROC", "SYSIBMADM", "userid", where "userid" is the value of the USER special register. If a schema name is specified for the Default collection (DFTRDBCOL) parameter, the schema name takes the place of userid.
- *LIBL
- The path used is the library list at runtime.
- name
- Specify one or more schema names. A maximum of 268 schema names may be specified.
Top |
SQL rules (SQLCURRULE)
Specifies the semantics used for SQL statements.
- *DB2
- The semantics of all SQL statements will default to the rules established for DB2. The following semantics are controlled by this option:
Hexadecimal constants are treated as character data.
Unicode graphic-string constants are UCS-2 (CCSID 13488).
Assignments to SQL-variables and SQL-parameters within the body of a routine or a trigger will use retrieval assignment rules.
When describing a select statement into an SQLDA and SQLN is smaller than the required number of SQLVAR entries, SQLSTATE 01005 is returned only when the result table contains LOBs or UDTs.
- *STD
- The semantics of all SQL statements will default to the rules established by the ISO and ANSI SQL standards. The following semantics are controlled by this option:
Hexadecimal constants are treated as binary data.
Unicode graphic-string constants are UTF-16 (CCSID 1200).
Assignments to SQL-variables and SQL-parameters within the body of a routine or a trigger will use storage assignment rules.
When describing a select statement into an SQLDA and SQLN is smaller than the required number of SQLVAR entries, SQLSTATE 01005 is always returned.
Top |
IBM SQL flagging (SAAFLAG)
Specifies the IBM SQL flagging function. This parameter allows you to flag SQL statements to verify whether they conform to IBM SQL syntax.
- *NOFLAG
- No checks are made to see whether SQL statements conform to IBM SQL syntax.
- *FLAG
- Checks are made to see whether SQL statements conform to IBM SQL syntax.
Top |
ANS flagging (FLAGSTD)
Specifies whether non-standard statements are flagged. This parameter allows you to flag SQL statements to verify whether they conform to the Core level of the ISO/IEC 9075-2003 standards.
- *NONE
- No checks are made to see whether SQL statements conform to ANSI standards.
- *ANS
- Checks are made to see whether SQL statements conform to standards.
Top |
Print file (PRTFILE)
Specifies the printer device file to be used for the precompiler output listing.
Qualifier 1: Print file
- QSYSPRT
- The precompiler output file is directed to the IBM-supplied printer file, QSYSPRT. The file QSYSPRT has a record length of 132. If you specify a file whose record length is less than 132, information is lost.
- name
- Specify the name of the printer device file to which the precompiler output is directed.
Qualifier 2: Library
- *LIBL
- All libraries in the job's library list are searched until the first match is found.
- *CURLIB
- The current library for the job is searched. If no library is specified as the current library for the job, the QGPL library is used.
- name
- Specify the name of the library where the printer file is located.
Top |
Debugging view (DBGVIEW)
Specifies the type of source debug information to be provided by the SQL precompiler.
- *NONE
- The source view will not be generated.
- *SOURCE
- The SQL precompiler will provide the source views for the root and if necessary, SQL INCLUDE statements. A view is to be provided which contains the statements generated by the precompiler.
Top |
Debug encryption key (DBGENCKEY)
Specifies the encryption key to be used to encrypt program source that is embedded in debug views.
- *NONE
- No encryption key is specified.
- character-value
- Specify the key to be used to encrypt program source that is embedded in debug views stored in the module object. The length of the key can be between 1 and 16 bytes. A key of length 1 to 15 bytes will be padded to 16 bytes with blanks for the encryption. Specifying a key of length zero is the same as specifying *NONE.
If the key contains any characters which are not invariant over all code pages, it will be up to the user to ensure that the target system uses the same code page as the source system, otherwise the key may not match and the decryption may fail. If the encryption key must be entered on systems with differing code pages, it is recommended that the key be made of characters which are invariant for all EBCDIC code pages.
Top |
User profile (USRPRF)
Specifies the user profile that is used when the compiled program object and SQL package object is run, including the authority that the program object or SQL package has for each object in static SQL statements. The profile of either the owner or the user is used to control access to objects.
- *NAMING
- The user profile is determined by the naming convention. If the naming convention is *SQL, USRPRF(*OWNER) is used. If the naming convention is *SYS, USRPRF(*USER) is used.
- *USER
- The profile of the user running the program or SQL package is used.
- *OWNER
- The user profiles of both the owner and the user are used when the program or SQL package is run.
Top |
Dynamic user profile (DYNUSRPRF)
Specifies the user profile used for dynamic SQL statements.
- *USER
- Local dynamic SQL statements are run under the profile of the program's user. Distributed dynamic SQL statements are run under the profile of the application server job.
- *OWNER
- Local dynamic SQL statements are run under the profile of the program's owner. Distributed dynamic SQL statements are run under the profile of the SQL package's owner.
Top |
Sort sequence (SRTSEQ)
Specifies the sort sequence table to be used for string comparisons in SQL statements.
Note: *HEX must be specified for this parameter on distributed applications where the application server is not on IBM i.
Single values
- *JOB
- The SRTSEQ value for the job is used.
- *JOBRUN
- The SRTSEQ value for the job is retrieved when the program is run. For distributed applications, SRTSEQ(*JOBRUN) is valid only when LANGID(*JOBRUN) is also specified.
- *LANGIDUNQ
- The unique-weight sort table for the language specified for the Language id (LANGID) parameter is used.
- *LANGIDSHR
- The shared-weight sort table for the language specified for the LANGID parameter is used.
- *HEX
- A sort sequence table is not used. The hexadecimal values of the characters are used to determine the sort sequence.
Qualifier 1: Sort sequence
- name
- Specify the name of the sort sequence table to be used with this program.
Qualifier 2: Library
- *LIBL
- All libraries in the job's library list are searched until the first match is found.
- *CURLIB
- The current library for the job is searched. If no library is specified as the current library for the job, the QGPL library is used.
- name
- Specify the name of the library to be searched.
Top |
Language id (LANGID)
Specifies the language identifier to be used when SRTSEQ(*LANGIDUNQ) or SRTSEQ(*LANGIDSHR) is specified.
- *JOB
- The LANGID value for the job is retrieved during the precompile.
- *JOBRUN
- The LANGID value for the job is retrieved when the program is run. For distributed applications, LANGID(*JOBRUN) is valid only when SRTSEQ(*JOBRUN) is also specified.
- language-id
- Specify the language identifier to be used by the program.
Top |
To source file (TOSRCFILE)
Specifies the source file that is to contain the output source member that has been processed by the SQL precompiler. If the specified source file is not found, it will be created. The output member will have the same name as the name specified for the Object (OBJ) parameter. If this is an existing source file, it should have a record length of 112.
Qualifier 1: To source file
- QSQLTEMP1
- The source file QSQLTEMP1 will be used.
- name
- Specify the name of the source file to contain the output source member.
Qualifier 2: Library
- QTEMP
- The library QTEMP will be used.
- *LIBL
- The job's library list is searched for the specified file. If the file is not found in any library in the library list, the file will be created in the current library.
- *CURLIB
- The current library for the job will be used. If no library is specified as the current library for the job, the QGPL library is used.
- name
- Specify the name of the library that is to contain the output source file.
Top |
Decimal result options (DECRESULT)
Specifies the maximum precision, maximum scale, and minimum divide scale that should be used during decimal operations, such as decimal arithmetic. The specified limits only apply to NUMERIC and DECIMAL data types.
Element 1: Maximum precision
- 31
- The maximum precision (length) that should be returned from decimal operations is 31 digits.
- 63
- The maximum precision (length) that should be returned from decimal operations is 63 digits.
Element 2: Maximum scale
- 31
- The maximum scale (number of decimal positions to the right of the decimal point) that should be returned from decimal operations is 31 digits.
- 0-63
- Specify the maximum scale (number of decimal positions to the right of the decimal point) that should be returned from decimal operations. The value can range from 0 to the maximum precision.
Element 3: Minimum divide scale
- 0
- The minimum divide scale is not used.
- 0-9
- Specify the minimum divide scale (number of decimal positions to the right of the decimal point) that should be returned from decimal operations. The value cannot exceed the maximum scale. If 0 is specified for the maximum scale, minimum divide scale is not used.
Top |
Decimal float rounding mode (DECFLTRND)
Specifies the decimal floating point rounding mode used for static SQL statements.
- *HALFEVEN
- Round to nearest; if equidistant, round so that the final digit is even. If the discarded digits represent greater than half (0.5) the value of a one in the next left position then the result coefficient should be incremented by 1 (rounded up). If they represent less than half, then the result coefficient is not adjusted (that is, the discarded digits are ignored). Otherwise (they represent exactly half) the result coefficient is unaltered if its rightmost digit is even, or incremented by 1 (rounded up) if its rightmost digit is odd (to make an even digit).
- *HALFUP
- Round to nearest; if equidistant, round up. If the discarded digits represent greater than or equal to half (0.5) of the value of a one in the next left position then the result coefficient should be incremented by 1 (rounded up). Otherwise the discarded digits are ignored.
- *DOWN
- Round towards 0 (truncation). The discarded digits are ignored.
- *CEILING
- Round towards +infinity. If all of the discarded digits are zero or if the sign is negative the result is unchanged other than the removal of discarded digits. Otherwise, the result coefficient should be incremented by 1 (rounded up).
- *FLOOR
- Round towards -infinity. If all of the discarded digits are zero or if the sign is positive the result is unchanged other than the removal of discarded digits. Otherwise, the sign is negative and the result coefficient should be incremented by 1.
- *HALFDOWN
- Round to nearest; if equidistant, round down. If the discarded digits represent greater than half (0.5) of the value of a one in the next left position then the result coefficient should be incremented by 1 (rounded up). Otherwise (the discarded digits are 0.5 or less) the discarded digits are ignored.
- *UP
- Round away from 0. Of all of the discarded digits are zero the result is unchanged other than the removal of discarded digits. Otherwise, the result coefficient should be incremented by 1 (rounded up).
Top |
Compiler options (COMPILEOPT)
Specifies additional parameters to be used on the compiler command. The COMPILEOPT string is added to the compiler command built by the precompiler. If INCDIR( is anywhere in the string, the precompiler will call the compiler using the SRCSTMF parameter. There is no validation of the string. The compiler command will issue an error if any parameter is incorrect. Please refer to the DB2 for i SQL programming topic collection in the IBM i Information Center at http://www.ibm.com/systems/i/infocenter/ for a list of parameters that the precompiler generates for the compiler command. Using any of the keywords that the precompiler passes to the compiler will cause the compiler command to fail because of duplicate parameters.
- *NONE
- No additional parameters will be used on the compiler command.
- character-value
- Specify no more than 5000 characters, enclosed in apostrophes.
Top |
Examples
CRTSQLRPGI OBJ(PAYROLL) OBJTYPE(*PGM) TEXT('Payroll Program')
This command runs the SQL precompiler which precompiles the RPG source and stores the changed source in member PAYROLL of source file QSQLTEMP1 in library QTEMP. The ILE RPG compiler is called to create program PAYROLL in the current library by using the source member created by the SQL precompiler.
Top |
Error messages
*ESCAPE Messages
- SQL9001
- SQL precompile failed.
- SQL9002
- Conflict in TGTRLS parameters for SQL precompile and &7 compile.
- SQL9003
- &7 Compile at wrong level for SQL source.
- SQL9004
- Create of SQL package failed.
- SQL9006
- DB2 Query Mgr and SQL DevKit not at same install level as the operating system.
- SQL9019
- SQL precompile failed.
Top |