Specifies the source file that contains the CL source member to be compiled.
Qualifier 1: Source file
QCLSRC
The source file named QCLSRC, that contains the CL source member to be compiled, is used.
name
Specify the name of the source file that contains the CL source member to be compiled. The source file can be a database file, a device file, or an inline data file.
Qualifier 2: Library
*LIBL
All libraries in the library list for the current thread are searched until the first match is found.
*CURLIB
The current library for the thread is used to locate the source file. If no library is specified as the current library for the thread, the QGPL library is used.
Specifies the name of the member of the source file that contains the CL source member to be compiled.
*MODULE
The CL source member to be compiled is in the member of the source file that has the same name as that specified for the MODULE parameter for the compiled module.
name
Specify the name of the member that contains the CL source, if the member name is not the same as the name of the module to be created.
Specifies text that briefly describes the compiled CL module.
*SRCMBRTXT
The text is taken from the source file member used to create the CL module. If the source file is an inline data file or a device file, the text is blank.
*BLANK
Text is not specified.
'description'
Specify no more than 50 characters of text, enclosed in apostrophes.
Specifies whether or not a compiler listing is produced.
*PRINT
The compiler listing is produced. The information contained in the listing is dependent on the values specified for the Source listing options (OPTION) parameter.
*NONE
The compiler listing is not produced. When a listing is not required, this option should be used because compile-time performance may be better.
Specifies the types of output lists created when this command is processed and whether a program is created. A maximum of four of the following values can be specified in any order on this parameter. If neither or both of the values in each group are specified, the underlined value is used.
Note: The underlined values for this parameter are similar to, but not actually default values, and therefore, cannot be changed with the Change Command Default (CHGCMDDFT) command.
Module Creation Option
*GEN
All phases of the compilation process are carried out.
*NOGEN
Compilations stops after syntax checking. No module is created.
Cross-Reference Option
*NOXREF
No cross-reference list of references to variable and data items in the source is created.
*XREF
A cross-reference listing of the source program is produced. OUTPUT(*PRINT) must be specified.
Second-Level Message Text Option
*NOSECLVL
No second level message text is printed.
*SECLVL
Second-level message text is printed. OUTPUT(*PRINT) must be specified.
Event File Creation Option
*NOEVENTF
The compiler will not produce an event file for use by the CoOperative Development Environment (CODE) product.
*EVENTF
The compiler produces an event file for use by the CODE product. The event file will be created as a member in the file EVFEVENT in your source library. The CODE product uses this file to offer error feedback integrated with the CODE editor. This option is normally specified by the CODE product on your behalf.
DO/SELECT Nesting Level Option
*NODOSLTLVL
The compiler does not add the new columns DO SLT into the spooled file printed. DO and SELECT nesting level are not indicated.
*DOSLTLVL
The compiler adds the new columns DO SLT into the spooled file in order to indicate the DO and SELECT nesting level. The column DO indicates the Do level starting for every Do Group, Do For, Do Until and Do While and finishing at the corresponding End Do Group. The column SLT indicates the SELECT level starting for every Select and finishing at the corresponding End Select.
Specifies the logging options for a created CL module.
*JOB
Logging of commands in a running CL module depends on the status of the job's logging flag (see the LOGCLPGM parameter of the Change Job (CHGJOB) command). To list the logged commands, the logging level of the jobs must be 3 or 4.
A *YES or *NO value takes precedence over any value specified in the CHGJOB command.
Specifies whether the CL source is saved with the module object. Source that is saved can be retrieved later by using the Retrieve CL Source (RTVCLSRC) command.
Note: This parameter is ignored if a release earlier than V7R1M0 is specified for the Target release (TGTRLS) parameter.
Specifies whether an existing module is replaced if a module with the same name already exists in the specified library.
*YES
The existing module is replaced by moving it to the QRPLOBJ library.
Notes:
If a running CL module is recompiled with *YES specified for the REPLACE parameter, message queue errors may occur in the running CL module.
Specifying *YES for this parameter causes the value on the AUT parameter to be ignored. The existing module is used as the source of authority. To change the authority for the module, you can use the Grant Object Authority (GRTOBJAUT) or Revoke Object Authority (RVKOBJAUT) commands.
*NO
The existing module is not replaced. When a module with the same name exists in the specified library, a message is displayed and compilation stops.
Specifies the release of the operating system on which you intend to use the object being created.
When specifying the target-release value, the format VxRxMx is used to specify the release, where Vx is the version, Rx is the release, and Mx is the modification level. For example, V5R3M0 is version 5, release 3, modification 0.
Valid values depend on the current version, release, and modification level of the operating system, and they change with each new release. You can press F4 while prompting this command parameter to see a list of valid target release values.
*CURRENT
The object is to be used on the release of the operating system currently running on your system. The object can also be used on a system with any subsequent release of the operating system installed.
*PRV
The object is to be used on the previous release with modification level 0 of the operating system. The object can also be used on a system with any subsequent release of the operating system installed.
character-value
Specify the release in the format VxRxMx. The object can be used on a system with the specified release or with any subsequent release of the operating system installed.
Specifies the authority you are granting to the users who do not have specific authority for the object, who are not on the authorization list, and whose user group has no specific authority for the object.
*LIBCRTAUT
The system determines the authority for the object by using the value specified for the Create authority (CRTAUT) parameter on the Create Library (CRTLIB) command for the library containing the object to be created. If the value specified for the CRTAUT parameter is changed, the new value will not affect any existing objects.
*CHANGE
The user can perform all operations on the object except those limited to the owner or controlled by object existence (*OBJEXIST) and object management (*OBJMGT) authorities. The user can change and perform basic functions on the object. *CHANGE authority provides object operational (*OBJOPR) authority and all data authority. If the object is an authorization list, the user cannot add, change, or remove users.
*ALL
The user can perform all operations except those limited to the owner or controlled by authorization list management (*AUTLMGT) authority. The user can control the object's existence, specify the security for the object, change the object, and perform basic functions on the object. The user also can change ownership of the object.
*USE
The user can perform basic operations on the object, such as running a program or reading a file. The user cannot change the object. Use (*USE) authority provides object operational (*OBJOPR), read (*READ), and execute (*EXECUTE) authorities.
*EXCLUDE
The user cannot access the object.
name
Specify the name of an authorization list to be used for authority to the object. Users included in the authorization list are granted authority to the object as specified in the list. The authorization list must exist when the object is created.
Note: This parameter is ignored when REPLACE(*YES) is specified.
Specifies the sort sequence table to be used for string comparisons for this CL module. The sort sequence value is used with the language identifier and the coded character set identifier of the job to determine the sort sequence table to use.
Single values
*HEX
A sort sequence table is not used. The hexadecimal values of the characters are used to determine the sort sequence.
*JOB
The sort sequence used is the SRTSEQ associated with the job when the CL module is created.
*JOBRUN
The sort sequence used is the SRTSEQ associated with the job when the CL module is run.
*LANGIDUNQ
The sort sequence table uses a unique weight for each character, and is the unique-weight sort table for the language specified for the LANGID parameter.
*LANGIDSHR
The sort sequence table uses the same weight for multiple characters, and is the shared-weight sort sequence table associated with the language specified for the LANGID parameter.
Qualifier 1: Sort sequence
name
Specify the name of the sort sequence table to be used with this CL module.
Qualifier 2: Library
*LIBL
All libraries in the library list for the current thread are searched until the first match is found.
*CURLIB
The current library for the thread is searched. If no library is specified as the current library for the thread, the QGPL library is searched.
Specifies the optimization level of the generated program code. ILE CL can not be optimized. For compatibility, values other than *NONE are accepted, but no optimization will be performed. ILE CL modules and programs should not be used with system functions that require an optimization level higher than *NONE.
*NONE
The generated code is not optimized. This value is the fastest level of optimization in terms of translation time. This level allows variables to be displayed and modified while debugging.
*BASIC
No optimization is performed. CPD0861 will be displayed in the compiled listing and sent to the job log.
*FULL
No optimization is performed. CPD0861 will be displayed in the compiled listing and sent to the job log.
10
No optimization is performed. CPD0861 will be displayed in the compiled listing and sent to the job log.
20
No optimization is performed. CPD0861 will be displayed in the compiled listing and sent to the job log.
30
No optimization is performed. CPD0861 will be displayed in the compiled listing and sent to the job log.
40
No optimization is performed. CPD0861 will be displayed in the compiled listing and sent to the job log.
Specifies the encryption key to be used to encrypt program source that is embedded in debug views.
*NONE
No encryption key is specified.
character-value
Specify the key to be used to encrypt program source that is embedded in debug views stored in the module object. The length of the key can be between 1 and 16 bytes. A key of length 1 to 15 bytes will be padded to 16 bytes with blanks for the encryption. Specifying a key of length zero is the same as specifying *NONE.
If the key contains any characters which are not invariant over all code pages, it will be up to the user to ensure that the target system uses the same code page as the source system, otherwise the key may not match and the decryption may fail. If the encryption key must be entered on systems with differing code pages, it is recommended that the key be made of characters which are invariant for all EBCDIC code pages.
Specifies the source file that contains members to be included in the program using Include CL Source (INCLUDE) commands.
Single Values
*SRCFILE
The source file specified for the Source file (SRCFILE) parameter contains the source file members specified on any CL INCLUDE commands.
Qualifier 1: INCLUDE file
name
Specify the name of the source file that contains the source file member specified on any CL INCLUDE commands.
The record length of the source file you specify here must be greater than or equal to the record length of the source file specified for the SRCFILE parameter.
Qualifier 2: Library
*LIBL
All libraries in the library list for the current thread are searched until the first match is found.
*CURLIB
The current library for the thread is used to locate the source file. If no library is specified as the current library for the thread, the QGPL library is used.
This command calls the ILE CL compiler to create a module (*MODULE) named PAYROLL. The CL program or ILE CL procedure source is in the default source file QCLSRC in the member PAYROLL. A compiler listing is created.