Error messages and codes: ADHPxxxx

The following information is about error messages and codes that begin with ADHP.

ADHP000I
Attempting connection to server server-address port=server-port
ADHP001I
Establishing Policy connection to server [server-address]
ADHP002I
Connection established to server [server-address]
ADHP003I
Connection was re-established to [server name]
ADHP004W
Connection was lost from server [server-address]
ADHP005S
Unable to establish a connection to server [server-address]
ADHP006E
Data loss has occurred as the result of a network send failure
ADHP007E
Unable to create a communications interface
ADHP008S
Required parameter was not supplied. Parameter=parameter-name
ADHP009I
TCP/IP streaming disabled due to user setting.
ADHP010I
Disconnecting from server server-name
ADHP012I
Failover support enabled
ADHP013I
Connection attempt timed out. Reattempting connection reattempt-number of total-reattempts.
ADHP015W
Primary server is unavailable
ADHP017W
Data is being temporarily stored in a spillfile until a connection is re-established
ADHP018I
Spillfile contents have been successfully be sent to server [server]
ADHP019S
Spillfile storage has been exhausted. Dataloss will occur
ADHP020I
Registering server [server] as eligible for failover
ADHP021E
Spillfile is approaching [50% | 85% | 95% |100%] capacity
ADHP022I
A connection has been established to failover server [server]
ADHP023I
A persisted policy from DD:ADHPLCY is being used.
ADHP026W
Invalid port specified for APPLIANCE_PORT. Port 16022 will be used instead.
ADHP028E
Required policy not available at initialization.
ADHP030I
IBM Security Guardium S-TAP for Db2 Policy component is terminating
ADHP031I
IBM Security Guardium S-TAP for Db2 V11.3 component connection established
ADHP032W
Contradictory value! Filter discarded: <filter-value>
ADHP033E
IP address is invalid for [IP address]
ADHP034W
An error occurred resolving host name [host name]
ADHP035I
Host name [host name] is resolved to IP address [IP address]
ADHP036I
Registering server <server> as eligible for mirroring.
ADHP093E
Policy discarded because all DB2® rules contain errors
ADHP094E
Policy discarded due to error
ADHP095E
error: rule discarded due to error
ADHP096E
rule error: [error]
ADHP097E
Unexpected error: [error_description]. Return code:[return_code]
ADHP099E
Unexpected error: error-condition
ADHP101W
Invalid value for filter. Reason: [reason]. Value: [value]
ADHP102E
Invalid value for sqlcode: [*_sqlcode_*]
ADHP103I
IBM Security Guardium S-TAP for Db2 on z/OS® STOP requested.
ADHP110I
IBM Security Guardium S-TAP for Db2 mode: *****
ADHP111I
STAP command [STAP MODIFY command]
ADHP120I
Installed Policy:
ADHP121I
[policy segment]
ADHP122I
Installed Quarantine:
ADHP123I
[quarantine segment]
ADHP124I
Installed Blocking:
ADHP125I
[blocking segment]
ADHP126I
STAP BLOCKING mode: [ENABLED|DISABLED|OPERATOR]
ADHP130I
Agent configuration:
ADHP131I
[agent configuration segment]
ADHP140I
Event Counts:
ADHP141I
[event type] [total collected]
ADHP142I
[event type] [total collected]
ADHP143I
[event type] [total collected]
ADHP144I
[event type] [total collected]
ADHP145I
[event type] [total collected]
ADHP146I
[event type] [total collected]
ADHP150I
Program levels:
ADHP151I
[program level segment]
ADHP160I
S-TAP allocation queue history:
ADHP161I
TimeStamp-------Queued------------Freed
ADHP162I
[allocation queue segment]
ADHP163I
S-TAP filter history:
ADHP164I
TimeStamp----Pass Stage 1-- ---Pass Stage2
ADHP165I
[filter queue segment]
ADHP166I
S-TAP IO history:
ADHP167I
TimeStamp--------Sent----------Bytes sent--------Write time
ADHP168I
[filter queue segment]
ADHP170I
Event count reported by the appliance at time: [count]
ADHP179E
Option [option] is invalid for STAP command
ADHP180I
[policy | quarantine | blocking] policy push detected.
ADHP183E
FORCE_LOG_LIMITED is enabled but APPLIANCE_PORT is not compatible.
ADHP182I
SUPPORT_FORCE_LOG_LIMITED is enabled.
ADHP183I
FORCE_LOG_LIMITED is not supported by the appliance.
ADHP184I
A pushed down [policy | blocking | quarantine] is in use.
ADHP185I
A [policy | quarantine | blocking] from DD is in use.
ADHP186I
A [policy | quarantine | blocking] from DD is in use, ignoring any pushed down policy.
ADHP188I
Blocking policy removed.
ADHP189W
There is no table found in database: [database name]
ADHP190W
DB2 object: [object type] with name: [object name] does not exist.
ADHP191W
Blocking is NOT ACTIVE because there is no valid target in the policy.
ADHP192E
SQL statement execution was unsuccessful, SQLCODE is: [sqlcode value] SQLSTATE is: [sqlstate value]
ADHP193I
STAP Logging command pushed down from UI to request STAP logging information.
ADHP194I
[n] messages pushed from appliance detected.
ADHP196I
Connection is active to server server-address.
ADHP197I
Connection is inactive to server server-address.
ADHP200E
Unexpected element in policy definition: <element>
ADHP201E
A policy must contain at least one rule
ADHP203E
Duplicate schema specification: [schema-name]
ADHP204E
Duplicate table specification: [table-name]
ADHP205E
Duplicate First Read event specification.
ADHP206E
Duplicate First Change event specification.
ADHP207E
Expected <policy> specification but found <***>.
ADHP208E
Policy syntax error
ADHP209E
Error in opening data set: [dataset]
ADHP210I
A thread termination request was received for thread [thread ID]
ADHP211W
Policy syntax error [error]
ADHP212W
[policy | quarantine | blocking] not enabled for ddname [ddname] reason: XML error
ADHP213E
Blocking policy syntax error: Invalid network [network]
ADHP214E
Blocking policy syntax error: Invalid netmask [netmask]
ADHP215E
Blocking policy syntax error: Invalid IP address [IP address]
ADHP216W
Blocking policy is ignored due to a previous error.
ADHP217W
Incomplete rule discarded. Rule name: [_rule-name_]
ADHP218W
Only one SQLCODE list is allowed. SQLCODE is discarded: [sqlcode]
ADHP220I
Appliance connect retry count has been reached, appliance ping rate is now increased to [number]
ADHP250E
Unable to send message. Connection to server is unavailable.
ADHP550E
Unable to send message. Connection to server is unavailable
ADHP700I
Collection Manager stop requested.
ADHP2020I
CURRENTLY ACTIVE POLICY RESULTS IN [ENABLED | DISABLED] COLLECTION.

Parent topic: Messages and codes for IBM Security Guardium S-TAP for Db2 on z/OS