Inspection engine tab
From the Inspection engine tab, you can view or change the parameters related to the Guardium inspection engine.
From the Inspection engine tab, you can view or change the parameters that are described in Table 1.
|Database type||The type of database for this External S-TAP®. If you did not select a database when you deployed the External S-TAP, you can specify it here. If you selected a database earlier, the field displays the selected database type and is read-only.|
|Database port||The port on which the database is listening.|
Identify specific clients to monitor by IP address. Specify a begin and end range of IP addresses to monitor. If blank, all clients are monitored.
Note: You can specify either Networks or Exclude networks, but not both.
|Exclude networks||Blank||Identify specific clients to exclude from monitoring. Specify a begin and end range of IP addresses to exclude. If blank, all clients are monitored.|
|Priority count||20||Specify the number of packets of a session to set as high priority. The first number of packets are sent to the high priority queue in the sniffer. The range is from 0 (off) to 50.|