readMessagePartner

Purpose

Use this command to display the configuration data for the specified message partner. You specify whether the data configured in the FTM SWIFT database or in the SAG are to be displayed.

Required access rights:	See Table 4
Predefined roles that provide required access rights:	See Table 2
Issue for OU:	DNFSYSOU
Issue to service:	DNFSAGCFG

Format

Parameters

-sag sag

Name of the SAG.

-mpn msg_partner

Name of the message partner.

-src

Which message partner configuration is to be displayed:

cfg: Display the message partner configuration as configured in the FTM SWIFT database.
sag: Display the message partner configuration as configured in SAG (this is the default).

Note: The constructs certificate list and service list are employed by FTM SWIFT to simplify the adding of certificates or services to a message partner. However, these constructs are unknown to an SAG, which assigns certificates and services to each message partner individually, without first grouping them into lists. Therefore:

The configuration data that is stored in FTM SWIFT for a message partner indicates the names of the certificate list and service list.
The configuration data that is stored on the SAG lists of the certificates and services associated with the message partner.

Examples

The following command displays the configuration data that is stored in FTM SWIFT for the message partner MP1 on the SAG SAG1:

INST1.DNFSYSOU.DNFSAGCFG>rmp -sag SAG1 -mpn MP1 -src cfg

The output is similar to this:

DNFG2029I 'MsgPartner deployed:'
DNFG2028I CetificateListName (cln) 'certlist1'
DNFG2028I DefaultMessageFormat (dfm) 'Sag:RelaxedSNL'
DNFG2028I LAUKeyName (lkn) 'LAUKeyMP1'
DNFG2028I ModifiedDateTime (mdt) '2009-11-09 12:31:55.71195'
DNFG2028I SupportedMessageFormat (mfm1) 'Sag:RelaxedSNL'
DNFG2028I MessagePartnerName (mpn) 'MP1'
DNFG2028I ServiceListName (sln) 'servlist1'
DNFG2028I MessagePartnerType (type) 'ClientServer'
DNFG2029I 'MQHAProfile deployed:'
DNFG2028I CCSID (cid) '437'
DNFG2028I MQHAFormatConversion (con) 'MQFMT_NONE'
DNFG2028I MQHAEnvelopeFormat (env) 'With'
DNFG2028I ModifiedDateTime (mdt) '2009-11-08 17:45:50.61142'
DNFG2028I MQConnectionName (mqcn) 'DnfMqConnection'
DNFG2028I OwnerOfMQHAProfile (owner) 'SAG1.MP1'
DNFG2028I ServerRequestQueue (rqq) 'INST1.DNF_FSM_SLS.MP1'

Note: The ModifiedDateTime (mdt) attribute shows the date and time when the message partner was last updated in the FTM SWIFT database. This attribute is set automatically and cannot be changed explicitly: there is no parameter -mdt for the addMessagePartner or updateMessagePartner commands.

The following command displays the configuration data that is stored on SAG1 for the message partner MP1:

INST1.DNFSYSOU.DNFSAGCFG>rmp -sag SAG1 -mpn MP1 -src sag

The output is similar to this:

DNFS1747I Entity is 'Enabled'.
DNFS1836I ApplicationType (type)='ClientServer'.
DNFS1836I DefaultMessageFormat (dfm)='Sag:RelaxedSNL'.
DNFS1836I SupportedMessageFormat (mfmx)='Sag:RelaxedSNL'.
DNFS1847I MQHAProfile:
DNFS1836I QueueManager (qm)=''.
DNFS1836I ServerRequestQueue (rqq)='INST1.DNF_FSM_SLS.MP1'.
DNFS1836I MqConnection (mqcn)='DnfMqConnection'.
DNFS1836I MessageExpiration (mex)=''.
DNFS1836I CCSID (cid)='1208'.
DNFS1836I MQHAFormatConversion (con)='MQFMT_NONE'.
DNFS1836I MQHAEnvelopeFormat (env)='With'.
DNFS1847I SiMpProfile:
DNFS1836I Certificate for Relaxed Mode (cert)='cn=john-smith,o=xxxxdeff,o=swift'.
DNFS1836I Certificate for Relaxed Mode (cert)='cn=jane-roe,o=xxxxdeff,o=swift'.
DNFS1836I Certificate for Relaxed Mode (cert)='cn=jack-sprat,o=xxxxdeff,o=swift'.
DNFS1836I Certificate for Relaxed Mode (cert)='cn=sanif-fagunn,o=xxxxdeff,o=swift'.
DNFS1847I LahMpProfile
DNFS1836I LAU Key left half (hk1)='****************'.
DNFS1836I LAU Key right half (hk2)='****************'.