camt.060.001.05 mapper

The camt.060 (camt.060.001.05) mappers are used to request the account servicing institution to send a report on the account owner's account as a camt.052, camt.053 or camt.054 statement. A single camt.060 mapper can be used to request multiple statements.

Overview

The camt.060 mappers are a pair of inbound and outbound mappers.

camt.060 inbound mapper: This mapper maps the AcctRptgReq messages to ISF messages. The default mapper name is Camt060ToISFMapper.
camt.060 outbound mapper: This mapper maps the ISF messages to AcctRptgReq messages. The default mapper name is ISFToCamt060Mapper.

The details of the mapping specification for these mappers are in separate documentation that is included in the documentation fix pack for High Value Payments. For more information about getting the documentation fix pack, see FTM support links for High Value Payments.

The inbound and outbound camt.060 mappers can also be used along with the High Value Payments business application header mapper or the ISO message router mapper. For more information, see High Value Payments business application header mapper and ISO message router mapper.

Inbound mapper

The CONFIG=entry channel parameter is required for the inbound mapper. The mapper uses this parameter to locate the <msgTypeCfg> entry with a <type> child element that contains camt.060.* in the value table. The <msgTypeCfg> entry contains the configuration parameters for the inbound mapper.

For example, the default Message From Target2 channel is configured with a CONFIG=HVP_MAP_CFG_MSG_FROM_TARGET2 parameter. When a camt.060.001.05 message is received, the mapper searches the value table to find the <msgTypeCfg> entry to use for the message. It searches for a value table entry that meets the following conditions.

The category is HVP_MAP_CFG_MSG_FROM_TARGET2.
The <msgTypeCfg> entry has a <type> child element with the value of camt.060.*.

If the <msgTypeCfg> entry cannot be found, the mapper causes an exception to report a subType not found error.

The default <msgTypeCfg> entry for HVP_MAP_CFG_MSG_FROM_TARGET2 is shown in the following example.


<msgTypeCfg>
   <class>CAMT060</class>
   <subType>HVP_FROM_CSM_GEN_ACCNTRPRT_REQ</subType>
   <extendedCfg>
      <name>MASTER_FLAG</name>
      <value>Y</value>
   </extendedCfg>
   <extendedCfg>
      <name>MAP_FOR_HVP</name>
      <value>Y</value>
   </extendedCfg>
   <pt>
      <class>CAMT060</class>
      <subType>HVP_FROM_CSM_GEN_ACCNTRPRT_REQ</subType>
   </pt>
   <mapName>Camt060ToISFMapper</mapName>
   <type>camt.060.*</type>
</msgTypeCfg>

The following table shows the default configuration parameters for channels that use the camt.060 inbound mapper.

Table 1. Default configuration parameters for channels that use the camt.060 inbound mapper
Category	Class	SubType	MASTER_FLAG
`HVP_MAP_CFG_MSG_FROM_TARGET2`	`CAMT060`	`HVP_FROM_CSM_GEN_ACCNTRPRT_REQ`	`Y`

The inbound mapper handles the datetime elements by using the following rules.

If a time zone offset is included in the datetime value, the datetime value is mapped to ISF with the UTC time zone.
If a time zone offset is not included in a datetime value, the following rules are used.
- If the time zone is configured in the Channel table, the input datetime value is recognized in the format of the channel time zone. It is mapped to ISF with the UTC time zone.
- If the time zone is not configured in the Channel table, the input datetime value is recognized in the format of the local time zone where the mapper is running. The input datetime is mapped to ISF with the UTC time zone.

Outbound mapper

The CONFIG=entry channel parameter is required for the outbound mapper. The mapper uses this parameter to locate the <msgTypeCfg> entry with a <subType> child element that contains the same value as the ISF business concept. The <msgTypeCfg> entry contains the configuration parameters for the outbound mapper.

When the outbound mapper is used along with the T2 message router mapper or ISO message router mapper, it uses a different method to find the <msgTypeCfg> entry in the value table. The mapper uses the setting that is stored in Environment.PMP.Variables.Rules.*[1].MAP_CONFIG instead of the configuration channel parameter to find the <msgTypeCfg> entry. For more information, see ISO message router mapper.

For example, the default Message To Target2 channel is configured with a CONFIG=HVP_MAP_CFG_MSG_TO_TARGET2 parameter. When an ISF message is received, the mapper searches the value table to find the <msgTypeCfg> entry to use for the message. It searches for a value table entry that meets the following conditions.

The category is one of the following values.
- The value from the Environment.PMP.Variables.Rules.*[1].MAP_CONFIG parameter, if the parameter is available.
- HVP_MAP_CFG_MSG_TO_TARGET2 is used when the Environment.PMP.Variables.Rules.*[1].MAP_CONFIG parameter is not available.
The <msgTypeCfg> entry has a <subType> child element with a value that is the same as the ISF business concept.

If the <msgTypeCfg> entry cannot be found, the mapper causes an exception to report a subType not found error.

The default <msgTypeCfg> entry for HVP_MAP_CFG_MSG_TO_TARGET2 is shown in the following example.

<msgTypeCfg>
   <class>CAMT060</class>
   <subType>HVP_TO_CSM_GEN_ACCNTRPRT_REQ</subType>
   <extendedCfg>
      <name>MASTER_FLAG</name>
      <value>N</value>
   </extendedCfg>
   <extendedCfg>
      <name>MAP_FOR_HVP</name>
      <value>Y</value>
   </extendedCfg>
   <pt>
      <class>CAMT060</class>
      <subType>HVP_TO_CSM_GEN_ACCNTRPRT_REQ</subType>
   </pt>
   <mapName>ISFToCamt060Mapper</mapName>
   <type>camt.060.001.05</type>
</msgTypeCfg>

The following table shows the values from the <msgTypeCfg> entry that are used as configuration parameters by the outbound mapper.

Table 2. Values from `<msgTypeCfg>` that are used as configuration parameters by the outbound mapper
Element	Description
`<extendedCfg>` element that has a `<name>` child element with the value MAP_FOR_HVP.	The value from the associated `<value>` child element indicates whether the map is for High Value Payments.
`<type>`	The value from this element is used as the namespace of the output camt.060 message. For T2, the value must be camt.060.001.05.

The following table shows the default configuration parameters for the channels that use the camt.060 outbound mapper.

Table 3. Default configuration parameters for channels that use the camt.060 outbound mapper
Category	Class	SubType	Type
`HVP_MAP_CFG_MSG_TO_TARGET2`	`CAMT060`	`HVP_TO_CSM_GEN_ACCTPRPT_REQ`	`camt.060.001.05`

The outbound mapper handles the datetime elements by using the following rules.

If the time zone is configured in the Channel table, the input datetime value is mapped from the UTC time zone to the format of the channel time zone.
If the time zone is not configured in the Channel table, the local time zone where the mapper is running is used. The input datetime value is mapped from the UTC time zone to the format of the local time zone.

The outbound mapper uses the TS_INCLUDE_OFFSET channel parameter to control whether the time zone offset is included in the output datetime values.

If TS_INCLUDE_OFFSET is set to Y, the time zone offset is included in the output datetime values.
If TS_INCLUDE_OFFSET is set to N or not configured, the time zone offset is not included in the output datetime values.