SMART ASC/ASCQ error codes and messages

Table 1 shows descriptions of common Self-Monitoring, Analysis and Reporting Technology (SMART) ASC/ASCQ error codes that are classified for a direct access device. The ASC (additional sense code) and ASCQ (additional sense code qualifier) are known as SCSI additional sense data codes, as defined by SCSI standards. SMART adds monitoring and troubleshooting functionality by automatically checking a disk drive's health and reporting potential problems.
Note: Values in the following table such as "5D" are the same as the "5DH" displayed in the tool; some values such as "0" might have additional padding, so that "0" will be the same as "00."
Table 1. SMART ASC/ASCQ error codes and messages
ASC ASCQ Description
00 00 NO ADDITIONAL SENSE INFORMATION
00 06 I/O PROCESS TERMINATED
00 16 OPERATION IN PROGRESS
00 17 CLEANING REQUESTED
00 1D ATA PASS THROUGH INFORMATION AVAILABLE
00 1E CONFLICTING SA CREATION REQUEST
00 1F LOGICAL UNIT TRANSITIONING TO ANOTHER POWER CONDITION
01 00 NO INDEX/SECTOR SIGNAL
02 00 NO SEEK COMPLETE
03 00 PERIPHERAL DEVICE WRITE FAULT
04 00 LOGICAL UNIT NOT READY
04 01 LOGICAL UNIT IS IN PROCESS OF BECOMING READY
04 02 LOGICAL UNIT NOT READY, INITIALIZING COMMAND REQUIRED
04 03 LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED
04 04 LOGICAL UNIT NOT READY, FORMAT IN PROGRESS
04 05 LOGICAL UNIT NOT READY, REBUILD IN PROGRESS
04 06 LOGICAL UNIT NOT READY, RECALCULATION IN PROGRESS
04 07 LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
04 09 LOGICAL UNIT NOT READY, SELF-TEST IN PROGRESS
04 0A LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION
04 0B LOGICAL UNIT NOT ACCESSIBLE, TARGET PORT IN STANDBY STATE
04 0C LOGICAL UNIT NOT ACCESSIBLE, TARGET PORT IN UNAVAILABLE STATE
04 10 LOGICAL UNIT NOT READY, AUXILIARY MEMORY NOT ACCESSIBLE
04 11 LOGICAL UNIT NOT READY, NOTIFY (ENABLE SPINUP) REQUIRED
04 13 LOGICAL UNIT NOT READY, SA CREATION IN PROGRESS
04 14 LOGICAL UNIT NOT READY, SPACE ALLOCATION IN PROGRESS
04 1A LOGICAL UNIT NOT READY, START STOP UNIT COMMAND IN PROGRESS
05 00 LOGICAL UNIT DOES NOT RESPOND TO SELECTION
06 00 NO REFERENCE POSITION FOUND
07 00 MULTIPLE PERIPHERAL DEVICES SELECTED
08 00 LOGICAL UNIT COMMUNICATION FAILURE
08 01 LOGICAL UNIT COMMUNICATION TIME-OUT
08 02 LOGICAL UNIT COMMUNICATION PARITY ERROR
08 03 LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)
08 04 UNREACHABLE COPY TARGET
09 00 TRACK FOLLOWING ERROR
09 04 HEAD SELECT FAULT
0A 00 ERROR LOG OVERFLOW
0B 00 WARNING
0B 01 WARNING - SPECIFIED TEMPERATURE EXCEEDED
0B 02 WARNING - ENCLOSURE DEGRADED
0B 03 WARNING - BACKGROUND SELF-TEST FAILED
0B 04 WARNING - BACKGROUND PRE-SCAN DETECTED MEDIUM ERROR
0B 05 WARNING - BACKGROUND MEDIUM SCAN DETECTED MEDIUM ERROR
0B 06 WARNING - NON-VOLATILE CACHE NOW VOLATILE
0B 07 WARNING - DEGRADED POWER TO NON-VOLATILE CACHE
0B 08 WARNING - POWER LOSS EXPECTED
0C 02 WRITE ERROR - AUTO REALLOCATION FAILED
0C 03 WRITE ERROR - RECOMMEND REASSIGNMENT
0C 04 COMPRESSION CHECK MISCOMPARE ERROR
0C 05 DATA EXPANSION OCCURRED DURING COMPRESSION
0C 06 BLOCK NOT COMPRESSIBLE
0C 0B AUXILIARY MEMORY WRITE ERROR
0C 0C WRITE ERROR - UNEXPECTED UNSOLICITED DATA
0C 0D WRITE ERROR - NOT ENOUGH UNSOLICITED DATA
0D 00 ERROR DETECTED BY THIRD PARTY TEMPORARY INITIATOR
0D 01 THIRD PARTY DEVICE FAILURE
0D 02 COPY TARGET DEVICE NOT REACHABLE
0D 03 INCORRECT COPY TARGET DEVICE TYPE
0D 04 COPY TARGET DEVICE DATA UNDERRUN
0D 05 COPY TARGET DEVICE DATA OVERRUN
0E 00 INVALID INFORMATION UNIT
0E 01 INFORMATION UNIT TOO SHORT
0E 02 INFORMATION UNIT TOO LONG
0E 03 INVALID FIELD IN COMMAND INFORMATION UNIT
10 00 ID CRC OR ECC ERROR
10 01 LOGICAL BLOCK GUARD CHECK FAILED
10 02 LOGICAL BLOCK APPLICATION TAG CHECK FAILED
10 03 LOGICAL BLOCK REFERENCE TAG CHECK FAILED
11 00 UNRECOVERED READ ERROR
11 01 READ RETRIES EXHAUSTED
11 02 ERROR TOO LONG TO CORRECT
11 03 MULTIPLE READ ERRORS
11 04 UNRECOVERED READ ERROR - AUTO REALLOCATE FAILED
11 0A MISCORRECTED ERROR
11 0B UNRECOVERED READ ERROR - RECOMMEND REASSIGNMENT
11 0C UNRECOVERED READ ERROR - RECOMMEND REWRITE THE DATA
11 0D DE-COMPRESSION CRC ERROR
11 0E CANNOT DECOMPRESS USING DECLARED ALGORITHM
11 12 AUXILIARY MEMORY READ ERROR
11 13 READ ERROR - FAILED RETRANSMISSION REQUEST
11 14 READ ERROR - LBA MARKED BAD BY APPLICATION CLIENT
12 00 ADDRESS MARK NOT FOUND FOR ID FIELD
13 00 ADDRESS MARK NOT FOUND FOR DATA FIELD
14 00 RECORDED ENTITY NOT FOUND
14 01 RECORD NOT FOUND
14 05 RECORD NOT FOUND - RECOMMEND REASSIGNMENT
14 06 RECORD NOT FOUND - DATA AUTO-REALLOCATED
15 00 RANDOM POSITIONING ERROR
15 01 MECHANICAL POSITIONING ERROR
15 02 POSITIONING ERROR DETECTED BY READ OF MEDIUM
16 00 DATA SYNCHRONIZATION MARK ERROR
16 01 DATA SYNC ERROR - DATA REWRITTEN
16 02 DATA SYNC ERROR - RECOMMEND REWRITE
16 03 DATA SYNC ERROR - DATA AUTO-REALLOCATED
16 04 DATA SYNC ERROR - RECOMMEND REASSIGNMENT
17 00 RECOVERED DATA WITH NO ERROR CORRECTION APPLIED
17 01 RECOVERED DATA WITH RETRIES
17 02 RECOVERED DATA WITH POSITIVE HEAD OFFSET
17 03 RECOVERED DATA WITH NEGATIVE HEAD OFFSET
17 05 RECOVERED DATA USING PREVIOUS SECTOR ID
17 06 RECOVERED DATA WITHOUT ECC - DATA AUTO-REALLOCATED
17 07 RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT
17 08 RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE
17 09 RECOVERED DATA WITHOUT ECC - DATA REWRITTEN
18 00 RECOVERED DATA WITH ERROR CORRECTION APPLIED
18 01 RECOVERED DATA WITH ERROR CORR. & RETRIES APPLIED
18 02 RECOVERED DATA - DATA AUTO-REALLOCATED
18 05 RECOVERED DATA - RECOMMEND REASSIGNMENT
18 06 RECOVERED DATA - RECOMMEND REWRITE
18 07 RECOVERED DATA WITH ECC - DATA REWRITTEN
19 00 DEFECT LIST ERROR
19 01 DEFECT LIST NOT AVAILABLE
19 02 DEFECT LIST ERROR IN PRIMARY LIST
19 03 DEFECT LIST ERROR IN GROWN LIST
1A 00 PARAMETER LIST LENGTH ERROR
1B 00 SYNCHRONOUS DATA TRANSFER ERROR
1C 00 DEFECT LIST NOT FOUND
1C 01 PRIMARY DEFECT LIST NOT FOUND
1C 02 GROWN DEFECT LIST NOT FOUND
1D 00 MISCOMPARE DURING VERIFY OPERATION
1D 01 MISCOMPARE VERIFY OF UNMAPPED LBA
1E 00 RECOVERED ID WITH ECC CORRECTION
1F 00 PARTIAL DEFECT LIST TRANSFER
20 00 INVALID COMMAND OPERATION CODE
20 01 ACCESS DENIED - INITIATOR PENDING-ENROLLED
20 02 ACCESS DENIED - NO ACCESS RIGHTS
20 03 ACCESS DENIED - INVALID MGMT ID KEY
20 08 ACCESS DENIED - ENROLLMENT CONFLICT
20 09 ACCESS DENIED - INVALID LU IDENTIFIER
20 0A ACCESS DENIED - INVALID PROXY TOKEN
20 0B ACCESS DENIED - ACL LUN CONFLICT
21 00 LOGICAL BLOCK ADDRESS OUT OF RANGE
21 01 INVALID ELEMENT ADDRESS
22 00 ILLEGAL FUNCTION (USE 20 00, 24 00, OR 26 00)
24 00 INVALID FIELD IN CDB
24 01 CDB DECRYPTION ERROR
24 08 INVALID XCDB
25 00 LOGICAL UNIT NOT SUPPORTED
26 00 INVALID FIELD IN PARAMETER LIST
26 01 PARAMETER NOT SUPPORTED
26 02 PARAMETER VALUE INVALID
26 03 THRESHOLD PARAMETERS NOT SUPPORTED
26 04 INVALID RELEASE OF PERSISTENT RESERVATION
26 05 DATA DECRYPTION ERROR
26 06 TOO MANY TARGET DESCRIPTORS
26 07 UNSUPPORTED TARGET DESCRIPTOR TYPE CODE
26 08 TOO MANY SEGMENT DESCRIPTORS
26 09 UNSUPPORTED SEGMENT DESCRIPTOR TYPE CODE
26 0A UNEXPECTED INEXACT SEGMENT
26 0B INLINE DATA LENGTH EXCEEDED
26 0C INVALID OPERATION FOR COPY SOURCE OR DESTINATION
26 0D COPY SEGMENT GRANULARITY VIOLATION
26 0E INVALID PARAMETER WHILE PORT IS ENABLED
27 00 WRITE PROTECTED
27 01 HARDWARE WRITE PROTECTED
27 02 LOGICAL UNIT SOFTWARE WRITE PROTECTED
27 07 SPACE ALLOCATION FAILED WRITE PROTECT
28 00 NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
28 01 IMPORT OR EXPORT ELEMENT ACCESSED
29 00 POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
29 01 POWER ON OCCURRED
29 02 SCSI BUS RESET OCCURRED
29 03 BUS DEVICE RESET FUNCTION OCCURRED
29 04 DEVICE INTERNAL RESET
29 05 TRANSCEIVER MODE CHANGED TO SINGLE-ENDED
29 06 TRANSCEIVER MODE CHANGED TO LVD
29 07 I_T NEXUS LOSS OCCURRED
2A 00 PARAMETERS CHANGED
2A 01 MODE PARAMETERS CHANGED
2A 02 LOG PARAMETERS CHANGED
2A 03 RESERVATIONS PREEMPTED
2A 04 RESERVATIONS RELEASED
2A 05 REGISTRATIONS PREEMPTED
2A 06 ASYMMETRIC ACCESS STATE CHANGED
2A 07 IMPLICIT ASYMMETRIC ACCESS STATE TRANSITION FAILED
2A 08 PRIORITY CHANGED
2A 09 CAPACITY DATA HAS CHANGED
2A 0A ERROR HISTORY I_T NEXUS CLEARED
2A 0B ERROR HISTORY SNAPSHOT RELEASED
2A 10 TIMESTAMP CHANGED
2A 14 SA CREATION CAPABILITIES DATA HAS CHANGED
2B 00 COPY CANNOT EXECUTE SINCE HOST CANNOT DISCONNECT
2C 00 COMMAND SEQUENCE ERROR
2C 05 ILLEGAL POWER CONDITION REQUEST
2C 07 PREVIOUS BUSY STATUS
2C 08 PREVIOUS TASK SET FULL STATUS
2C 09 PREVIOUS RESERVATION CONFLICT STATUS
2C 0C ORWRITE GENERATION DOES NOT MATCH
2F 00 COMMANDS CLEARED BY ANOTHER INITIATOR
2F 01 COMMANDS CLEARED BY POWER LOSS NOTIFICATION
2F 02 COMMANDS CLEARED BY DEVICE SERVER
30 00 INCOMPATIBLE MEDIUM INSTALLED
30 01 CANNOT READ MEDIUM - UNKNOWN FORMAT
30 02 CANNOT READ MEDIUM - INCOMPATIBLE FORMAT
30 03 CLEANING CARTRIDGE INSTALLED
30 04 CANNOT WRITE MEDIUM - UNKNOWN FORMAT
30 05 CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
30 06 CANNOT FORMAT MEDIUM - INCOMPATIBLE MEDIUM
30 07 CLEANING FAILURE
30 0A CLEANING REQUEST REJECTED
31 00 MEDIUM FORMAT CORRUPTED
31 01 FORMAT COMMAND FAILED
32 00 NO DEFECT SPARE LOCATION AVAILABLE
32 01 DEFECT LIST UPDATE FAILURE
34 00 ENCLOSURE FAILURE
35 00 ENCLOSURE SERVICES FAILURE
35 01 UNSUPPORTED ENCLOSURE FUNCTION
35 02 ENCLOSURE SERVICES UNAVAILABLE
35 03 ENCLOSURE SERVICES TRANSFER FAILURE
35 04 ENCLOSURE SERVICES TRANSFER REFUSED
35 05 ENCLOSURE SERVICES CHECKSUM ERROR
37 00 ROUNDED PARAMETER
38 07 THIN PROVISIONING SOFT THRESHOLD REACHED
39 00 SAVING PARAMETERS NOT SUPPORTED
3A 00 MEDIUM NOT PRESENT
3A 01 MEDIUM NOT PRESENT - TRAY CLOSED
3A 02 MEDIUM NOT PRESENT - TRAY OPEN
3A 03 MEDIUM NOT PRESENT - LOADABLE
3A 04 MEDIUM NOT PRESENT - MEDIUM AUXILIARY MEMORY ACCESSIBLE
3B 0D MEDIUM DESTINATION ELEMENT FULL
3B 0E MEDIUM SOURCE ELEMENT EMPTY
3B 11 MEDIUM MAGAZINE NOT ACCESSIBLE
3B 12 MEDIUM MAGAZINE REMOVED
3B 13 MEDIUM MAGAZINE INSERTED
3B 14 MEDIUM MAGAZINE LOCKED
3B 15 MEDIUM MAGAZINE UNLOCKED
3D 00 INVALID BITS IN IDENTIFY MESSAGE
3E 00 LOGICAL UNIT HAS NOT SELF-CONFIGURED YET
3E 01 LOGICAL UNIT FAILURE
3E 02 TIMEOUT ON LOGICAL UNIT
3E 03 LOGICAL UNIT FAILED SELF-TEST
3E 04 LOGICAL UNIT UNABLE TO UPDATE SELF-TEST LOG
3F 00 TARGET OPERATING CONDITIONS HAVE CHANGED
3F 01 MICROCODE HAS BEEN CHANGED
3F 02 CHANGED OPERATING DEFINITION
3F 03 INQUIRY DATA HAS CHANGED
3F 04 COMPONENT DEVICE ATTACHED
3F 05 DEVICE IDENTIFIER CHANGED
3F 06 REDUNDANCY GROUP CREATED OR MODIFIED
3F 07 REDUNDANCY GROUP DELETED
3F 08 SPARE CREATED OR MODIFIED
3F 09 SPARE DELETED
3F 0A VOLUME SET CREATED OR MODIFIED
3F 0B VOLUME SET DELETED
3F 0C VOLUME SET DEASSIGNED
3F 0D VOLUME SET REASSIGNED
3F 0E REPORTED LUNS DATA HAS CHANGED
3F 0F ECHO BUFFER OVERWRITTEN
3F 10 MEDIUM LOADABLE
3F 11 MEDIUM AUXILIARY MEMORY ACCESSIBLE
3F 12 ISCSI IP ADDRESS ADDED
3F 13 ISCSI IP ADDRESS REMOVED
3F 14 ISCSI IP ADDRESS CHANGED
40 00 RAM FAILURE
40 NN DIAGNOSTIC FAILURE ON COMPONENT NN
41 00 DATA PATH FAILURE
42 00 POWER-ON OR SELF-TEST FAILURE
43 00 MESSAGE ERROR
44 00 INTERNAL TARGET FAILURE
44 71 ATA DEVICE FAILED SET FEATURES
45 00 SELECT OR RESELECT FAILURE
46 00 UNSUCCESSFUL SOFT RESET
47 00 SCSI PARITY ERROR
47 01 DATA PHASE CRC ERROR DETECTED
47 02 SCSI PARITY ERROR DETECTED DURING ST DATA PHASE
47 03 INFORMATION UNIT IUCRC ERROR DETECTED
47 04 ASYNCHRONOUS INFORMATION PROTECTION ERROR DETECTED
47 05 PROTOCOL SERVICE CRC ERROR
47 06 PHY TEST FUNCTION IN PROGRESS
47 7F SOME COMMANDS CLEARED BY ISCSI PROTOCOL EVENT
48 00 INITIATOR DETECTED ERROR MESSAGE RECEIVED
49 00 INVALID MESSAGE ERROR
4A 00 COMMAND PHASE ERROR
4B 00 DATA PHASE ERROR
4B 01 INVALID TARGET PORT TRANSFER TAG RECEIVED
4B 02 TOO MUCH WRITE DATA
4B 03 ACK/NAK TIMEOUT
4B 04 NAK RECEIVED
4B 05 DATA OFFSET ERROR
4B 06 INITIATOR RESPONSE TIMEOUT
4B 07 CONNECTION LOST
4C 00 LOGICAL UNIT FAILED SELF-CONFIGURATION
4D NN TAGGED OVERLAPPED COMMANDS (NN = TASK TAG)
4E 00 OVERLAPPED COMMANDS ATTEMPTED
53 00 MEDIA LOAD OR EJECT FAILED
53 02 MEDIUM REMOVAL PREVENTED
55 01 SYSTEM BUFFER FULL
55 02 INSUFFICIENT RESERVATION RESOURCES
55 03 INSUFFICIENT RESOURCES
55 04 INSUFFICIENT REGISTRATION RESOURCES
55 05 INSUFFICIENT ACCESS CONTROL RESOURCES
55 06 AUXILIARY MEMORY OUT OF SPACE
55 0B INSUFFICIENT POWER FOR OPERATION
5A 00 OPERATOR REQUEST OR STATE CHANGE INPUT
5A 01 OPERATOR MEDIUM REMOVAL REQUEST
5A 02 OPERATOR SELECTED WRITE PROTECT
5A 03 OPERATOR SELECTED WRITE PERMIT
5B 00 LOG EXCEPTION
5B 01 THRESHOLD CONDITION MET
5B 02 LOG COUNTER AT MAXIMUM
5B 03 LOG LIST CODES EXHAUSTED
5C 00 RPL STATUS CHANGE
5C 01 SPINDLES SYNCHRONIZED
5C 02 SPINDLES NOT SYNCHRONIZED
5D 00 FAILURE PREDICTION THRESHOLD EXCEEDED
5D 05 HARDWARE IMPENDING FAILURE HARD DISK DRIVE ERROR
5D 10 HARDWARE IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
5D 11 HARDWARE IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH
5D 12 HARDWARE IMPENDING FAILURE DATA ERROR RATE TOO HIGH
5D 13 HARDWARE IMPENDING FAILURE SEEK ERROR RATE TOO HIGH
5D 14 HARDWARE IMPENDING FAILURE TOO MANY BLOCK REASSIGNS
5D 15 HARDWARE IMPENDING FAILURE ACCESS TIMES TOO HIGH
5D 16 HARDWARE IMPENDING FAILURE START UNIT TIMES TOO HIGH
5D 17 HARDWARE IMPENDING FAILURE CHANNEL PARAMETRICS
5D 18 HARDWARE IMPENDING FAILURE CONTROLLER DETECTED
5D 19 HARDWARE IMPENDING FAILURE THROUGHPUT PERFORMANCE
5D 1A HARDWARE IMPENDING FAILURE SEEK TIME PERFORMANCE
5D 1B HARDWARE IMPENDING FAILURE SPIN-UP RETRY COUNT
5D 1C HARDWARE IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT
5D 20 CONTROLLER IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
5D 21 CONTROLLER IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH
5D 22 CONTROLLER IMPENDING FAILURE DATA ERROR RATE TOO HIGH
5D 23 CONTROLLER IMPENDING FAILURE SEEK ERROR RATE TOO HIGH
5D 24 CONTROLLER IMPENDING FAILURE TOO MANY BLOCK REASSIGNS
5D 25 CONTROLLER IMPENDING FAILURE ACCESS TIMES TOO HIGH
5D 26 CONTROLLER IMPENDING FAILURE START UNIT TIMES TOO HIGH
5D 27 CONTROLLER IMPENDING FAILURE CHANNEL PARAMETRICS
5D 28 CONTROLLER IMPENDING FAILURE CONTROLLER DETECTED
5D 29 CONTROLLER IMPENDING FAILURE THROUGHPUT PERFORMANCE
5D 2A CONTROLLER IMPENDING FAILURE SEEK TIME PERFORMANCE
5D 2B CONTROLLER IMPENDING FAILURE SPIN-UP RETRY COUNT
5D 2C CONTROLLER IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT
5D 30 DATA CHANNEL IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
5D 31 DATA CHANNEL IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH
5D 32 DATA CHANNEL IMPENDING FAILURE DATA ERROR RATE TOO HIGH
5D 33 DATA CHANNEL IMPENDING FAILURE SEEK ERROR RATE TOO HIGH
5D 34 DATA CHANNEL IMPENDING FAILURE TOO MANY BLOCK REASSIGNS
5D 35 DATA CHANNEL IMPENDING FAILURE ACCESS TIMES TOO HIGH
5D 36 DATA CHANNEL IMPENDING FAILURE START UNIT TIMES TOO HIGH
5D 37 DATA CHANNEL IMPENDING FAILURE CHANNEL PARAMETRICS
5D 38 DATA CHANNEL IMPENDING FAILURE CONTROLLER DETECTED
5D 39 DATA CHANNEL IMPENDING FAILURE THROUGHPUT PERFORMANCE
5D 3A DATA CHANNEL IMPENDING FAILURE SEEK TIME PERFORMANCE
5D 3B DATA CHANNEL IMPENDING FAILURE SPIN-UP RETRY COUNT
5D 3C DATA CHANNEL IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT
5D 40 SERVO IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
5D 41 SERVO IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH
5D 42 SERVO IMPENDING FAILURE DATA ERROR RATE TOO HIGH
5D 43 SERVO IMPENDING FAILURE SEEK ERROR RATE TOO HIGH
5D 44 SERVO IMPENDING FAILURE TOO MANY BLOCK REASSIGNS
5D 45 SERVO IMPENDING FAILURE ACCESS TIMES TOO HIGH
5D 46 SERVO IMPENDING FAILURE START UNIT TIMES TOO HIGH
5D 47 SERVO IMPENDING FAILURE CHANNEL PARAMETRICS
5D 48 SERVO IMPENDING FAILURE CONTROLLER DETECTED
5D 49 SERVO IMPENDING FAILURE THROUGHPUT PERFORMANCE
5D 4A SERVO IMPENDING FAILURE SEEK TIME PERFORMANCE
5D 4B SERVO IMPENDING FAILURE SPIN-UP RETRY COUNT
5D 4C SERVO IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT
5D 50 SPINDLE IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
5D 51 SPINDLE IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH
5D 52 SPINDLE IMPENDING FAILURE DATA ERROR RATE TOO HIGH
5D 53 SPINDLE IMPENDING FAILURE SEEK ERROR RATE TOO HIGH
5D 54 SPINDLE IMPENDING FAILURE TOO MANY BLOCK REASSIGNS
5D 55 SPINDLE IMPENDING FAILURE ACCESS TIMES TOO HIGH
5D 56 SPINDLE IMPENDING FAILURE START UNIT TIMES TOO HIGH
5D 57 SPINDLE IMPENDING FAILURE CHANNEL PARAMETRICS
5D 58 SPINDLE IMPENDING FAILURE CONTROLLER DETECTED
5D 59 SPINDLE IMPENDING FAILURE THROUGHPUT PERFORMANCE
5D 5A SPINDLE IMPENDING FAILURE SEEK TIME PERFORMANCE
5D 5B SPINDLE IMPENDING FAILURE SPIN-UP RETRY COUNT
5D 5C SPINDLE IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT
5D 60 FIRMWARE IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
5D 61 FIRMWARE IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH
5D 62 FIRMWARE IMPENDING FAILURE DATA ERROR RATE TOO HIGH
5D 63 FIRMWARE IMPENDING FAILURE SEEK ERROR RATE TOO HIGH
5D 64 FIRMWARE IMPENDING FAILURE TOO MANY BLOCK REASSIGNS
5D 65 FIRMWARE IMPENDING FAILURE ACCESS TIMES TOO HIGH
5D 66 FIRMWARE IMPENDING FAILURE START UNIT TIMES TOO HIGH
5D 67 FIRMWARE IMPENDING FAILURE CHANNEL PARAMETRICS
5D 68 FIRMWARE IMPENDING FAILURE CONTROLLER DETECTED
5D 69 FIRMWARE IMPENDING FAILURE THROUGHPUT PERFORMANCE
5D 6A FIRMWARE IMPENDING FAILURE SEEK TIME PERFORMANCE
5D 6B FIRMWARE IMPENDING FAILURE SPIN-UP RETRY COUNT
5D 6C FIRMWARE IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT
5D FF FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)
5E 00 LOW POWER CONDITION ON
5E 01 IDLE CONDITION ACTIVATED BY TIMER
5E 02 STANDBY CONDITION ACTIVATED BY TIMER
5E 03 IDLE CONDITION ACTIVATED BY COMMAND
5E 04 STANDBY CONDITION ACTIVATED BY COMMAND
5E 05 IDLE_B CONDITION ACTIVATED BY TIMER
5E 06 IDLE_B CONDITION ACTIVATED BY COMMAND
5E 07 IDLE_C CONDITION ACTIVATED BY TIMER
5E 08 IDLE_C CONDITION ACTIVATED BY COMMAND
5E 09 STANDBY_Y CONDITION ACTIVATED BY TIMER
5E 0A STANDBY_Y CONDITION ACTIVATED BY COMMAND
65 00 VOLTAGE FAULT
67 0A SET TARGET PORT GROUPS COMMAND FAILED
67 0B ATA DEVICE FEATURE NOT ENABLED
74 08 DIGITAL SIGNATURE VALIDATION FAILURE
74 0C UNABLE TO DECRYPT PARAMETER LIST
74 10 SA CREATION PARAMETER VALUE INVALID
74 11 SA CREATION PARAMETER VALUE REJECTED
74 12 INVALID SA USAGE
74 30 SA CREATION PARAMETER NOT SUPPORTED
74 40 AUTHENTICATION FAILED
74 71 LOGICAL UNIT ACCESS NOT AUTHORIZED
74 79 SECURITY CONFLICT IN TRANSLATED DEVICE
Parent topic: Resolving hard disk drive problems
Related tasks:
Displaying node mirror and hard drive status