Chassis replacement overview

Use the following information to help prepare for a chassis replacement. Do not remove components without following procedures in this section exactly as you will need to save critical device and SAN information for these components before disconnecting the chassis from the network, fabric, and power to begin removal procedures. After you reinstall components in the new chassis, follow exact procedures to reconnect to the network, fabric and power, and then download firmware if necessary and verify system operation and configuration.

Before beginning these procedures, perform the following tasks:
  • Place the replacement chassis in close proximity to the old chassis.
  • Provide a surface on which to place the old chassis, such as a second lift or the pallet originally provided with the chassis.
  • Obtain all tools and other materials listed below.
Attention: Refer to Safety notices and labels and ESD precautions before performing any removal or installation procedures.

Time and items required

The chassis replacement procedure takes approximately 1 hour to complete, depending on number of SFPs and cables installed.

The following items are required for the chassis replacement procedure:
  • Replacement chassis
  • ESD grounding strap
  • Phillips #2 screwdriver
  • 1/4 in. straight slot screwdriver
Parent topic: Customer replacement responsibilities