Repositioning the port side L-bracket

Perform the following steps to reposition the port side L-bracket for correct mounting.

1. On the port side of the outer slide rail, using the 11/32-inch wrench, loosen the nuts securing the L-bracket, as shown in the following figure.
2. Extend the end of the bracket beyond the end of the slide rail by 5/8 inch.

   Repositioning allows the rack mount brackets to align with the rack posts.

   Figure 1. Repositioning the L-brackets

   

   • 1. Three-hole slide mount L-bracket
   • 2. Locking hex nut, 8-32
   • 3. Outer slide rail
   • 4. 5/8-inch reposition