The FlashSystem 9200R rack solution has two SAN switches preinstalled. To connect them to your Ethernet
management network, provide IP configuration information. Also provide IP information for the PDUs
to enable monitoring power usage over your Ethernet management network.
Two identical Fibre Channel SAN fabric switches are dedicated to
the
system in your
FlashSystem 9200R rack solution. Provide the information in
Table 1 and
Table 2.
Fibre Channel switch 2 (lower)
Table 1. FlashSystem 9200R Fibre
Channel switch 2 (lower) information
| Serial number (when known, for reference) |
|
| Static IPv4 or IPv6 address |
|
| Subnet mask value |
|
| Default gateway value |
|
| Location of Ethernet port for connection to SAN switch |
|
| Administrator password to set |
|
Fibre Channel switch 1 (upper)
Table 2. FlashSystem 9200R Fibre
Channel switch 1 (upper) information
| Serial number (when known, for reference) |
|
| Static IPv4 or IPv6 address |
|
| Subnet mask value |
|
| Default gateway value |
|
| Location of Ethernet port for connection to SAN switch |
|
| Administrator password to set |
|
Two identical IBM® Intelligent Switched Power Distribution
Unit Plus (PDU+) PDUs are in your FlashSystem 9200R rack
solution.
To give
IBM Lab Services the
information that they need to configure the PDUs, provide your values in
Table 3 and
Table 4.
PDU A management connection
Table 3. FlashSystem 9200R PDU A
management connection information
| Serial number (when known, for reference) |
|
| Static IPv4 or IPv6 address |
|
| Subnet mask value |
|
| Default gateway value |
|
| Location of Ethernet port for connection |
|
| Administrator password to set |
|
| Identity of the site power supply outlet, for connection |
|
PDU A is on the right when you are viewing the front of the PDU.
PDU B management connection
Table 4. FlashSystem 9200R PDU B
management connection information
| Serial number (when known, for reference) |
|
| Static IPv4 or IPv6 address |
|
| Subnet mask value |
|
| Default gateway value |
|
| Location of Ethernet port for connection |
|
| Administrator password to set |
|
| Identity of the site power supply outlet, for connection |
|