High density expansion enclosure replaceable units
Replacement parts listed here are for a 4657-92G expansion enclosure.
Other expansion enclosure parts
Table 1 summarizes the part numbers and feature codes for other parts.
| Part Number | Description | Comments |
|---|---|---|
| 00AR317 | 3 m 12 Gb SAS Cable (mSAS HD) | |
| 00AR439 | 6 m 12 Gb SAS Cable (mSAS HD) | |
| 01LJ114 | Rail kit | |
| 01LJ116 | Front fascia (4U front cover) | |
| 01LJ118 | Display panel assembly | |
| 01LJ120 | PSU 1U fascia (cover) | The fascia must be removed to access the power supply units. |
| 01LJ122 | Power supply unit (PSU) | The expansion enclosure contains 2 PSUs. Each PSU requires a C19/C20 power cord. |
| 01LJ124 (for use with enclosure P/N 01LJ112) 01LJ860 (for use with enclosure P/N 01LJ607 |
Secondary expansion module | The expansion enclosure supports two-secondary expansion modules. CAUTION: Use
caution when you are removing or replacing a secondary expansion module from an enclosure with part
number 01LJ112. Avoid contact with the connectors on the main board.
|
| 01LJ126 | Fan module | The expansion enclosure contains four fan modules. |
| 01LJ128 | Expansion canister | |
| 01LJ130 | Cable management arms (CMA) | The part contains the upper and lower CMA. |
| 01LJ132 | Top cover | |
| 01LJ134 | Fan interface board | |
| 01LJ607 | Enclosure Note: Replaces enclosure P/N 01LJ112.
|
Includes the drive board, signal interconnect board, and internal power cables, in an otherwise empty enclosure. |
| 39M5388 | 16A power cord C19/C20 2 m |