lsdriveupgradeprogress

Use the lsdriveupgradeprogress command to view the status or progress of drives with pending downloads.

Syntax

Read syntax diagramSkip visual syntax diagramlsdriveupgradeprogressdrive_id

Parameters

-delim delimiter
(Optional) Specify a delimiter to separate data in the output.
-nohdr
(Optional) Suppress the headings in the output.
drive_id
(Optional) Specifies the update status or progress for a single drive. If not specified, the update status for all scheduled drives is displayed.
Note: If you specify this parameter, lsdriveupgradeprogress displays the update status of this drive. If you do not specify this parameter, lsdriveupgradeprogress displays the update status of all requested drives.

Description

The lsdriveupgradeprogress command completes whether the original applydrivesoftware command was addressed to a single drive (synchronous command) or multiple drives (asynchronous command).

The following outputs are possible:
id
Indicates the identity of the active drive.
status
Indicates the drive status. Each of the following values has a specific meaning:
  • progressing indicates all scheduled drives have completed; wait 270 seconds before you issue applydrivesoftware again.
  • completed indicates a successful firmware download.
  • updating indicates the update is ongoing.
  • scheduled indicates the update is in the download list, waiting to download.
  • not_scheduled indicates the drive is not scheduled.
    Note: This means the corresponding drive was not scheduled when applydrivesoftware -all was last issued.
  • canceled indicates the update has been canceled, either by command or by a system change that stops the applydrivesoftware command from running properly.
  • invalid indicates the drive download status is invalid, also the initial state.
  • If the field is blank, that indicates that the download is not scheduled (for example, the applydrivesoftware command has not been issued).
estimated_completion_time
Indicates the estimated completion time (YYMMDDHHMMSS), where:
  • Y is year
  • (The first) M is month
  • D is day
  • H is hour
  • (The second) M is minute
  • S is second
The value is blank if the status is either canceled or blank.