This information assists you in determining why the command file is not being processed,
when using a USB flash drive.
You might encounter this problem when running commands using your USB flash drive. If you encounter this situation,
verify the following items:
- That an satask_result.html file is in the root directory on the USB flash drive. If the file does not exist, then
the following problems are possible:
- The USB flash drive is not formatted with
the correct file system type. Use any USB flash drive that is formatted with FAT32 file
system on its first partition; for example, NTFS is not a supported type. Reformat the key or use a
different key.
- The USB port is not working. Try the key in the other .
- The
is not operational. Check the status using the light-emitting diode (LED) indicators.
- If there is a satask_result.html file, check the first entry in the
file. If there is no entry that matches the time the USB flash drive was used, it is possible that the
USB port is not working or the node is not operational. Check the node status using the LEDs.
- If there is a status output for the time the USB flash drive was used, then the
satask.txt file was not found. Check that the file was named correctly.
The satask.txt file is automatically deleted after it has been
processed.