IBM Storage Virtualize 3-Site Orchestrator commands

The following commands are used with IBM® Storage Virtualize 3-Site Orchestrator.

addnewrcrelationship
Use the addnewrcrelationship command to add an empty 2-site relationship to an existing 3-site consistency group.
ch3siteconfig
Use the ch3siteconfig command to change the current 3-site configuration and maintain standby orchestrator.
ch3sitercconsistgrp
Use the ch3sitercconsistgrp command to make configuration changes to a specified 3-site remote copy consistency group.
convertrcconsistgrp
Use the convertrcconsistgrp command to convert the specified 3-site source remote copy consistency group to a 2-site consistency group.
convertrcrelationship
Use the convertrcrelationship command to convert an existing 2-site remote copy relationship to a 3-site relationship. You can also use this command to convert one or more 3-site relationships to a 2-site relationship.
ls3siteconfig
Use the ls3siteconfig command to list the detailed status of a 3-site configuration.
ls3sitercconsistgrp
Use the ls3sitercconsistgrp command to list the detailed status of all 3-site remote copy consistency groups present in a 3-site configuration.
ls3sitercrelationship
Use the ls3sitercrelationship command to list the detailed status for all 3-site remote copy relationships in a 3-site configuration.
mk3siteconfig
Use the mk3siteconfig command to define a 3-site configuration.
rm3siteconfig
Use the rm3siteconfig command to remove the current 3-site configuration from the orchestrator.
start3sitercconsistgrp
Use the start3sitercconsistgrp command to start data cycling for a 3-site consistency group with a stopped status.
stop3sitercconsistgrp
Use the stop3sitercconsistgrp command to stop 3-site data cycling between the near and far sites.

Parent topic: Command-line interface