Multiple IP addresses commands

Use the following set of commands to configure or create portset, IP objects and associate them with host objects.

chportethernet
Use the chportethernet command to configure the permitted uses of ethernet ports and the maximum transmission unit (MTU) setting for the ethernet.
chportset
Use the chportset command to modify the attributes of a portset.
lsip
Use lsip command to list the currently configured IP addresses. IP addresses can be assigned to different portset types which determine if the IP address is used for host attachment, storage virtualization, or IP replication.
lsportethernet
Use the lsportethernet command to list the properties and status of the storage system ethernet ports.
lsportset
Use the lsportset command to list the currently configured portsets. This list shows the ID, portset name, and the number of IP addresses and hosts associated with each portset along with ownership group information.
mkip
Use the mkip command to create a new IP address and associate it with an existing portset. You can create one IP address for each node, port, and portset.
mkportset
Use the mkportset command to create a new portset.
rmip
Use rmip command to delete an IP address specified by the IP address ID.
rmportset
Use the rmportset command to delete the portset. Before deleting the Fibre Channel (FC) port make sure if any Fibre Channel host or Fibre Channel IO port under the portset is defined.

Parent topic: Command-line interface

Related reference

chportethernet
chportset
lsip
lsportethernet
lsportset
mkip
mkportset
rmip
rmportset