The front panel of the enclosure has three light-emitting diodes
(LEDs) that display the overall health of the enclosure.
Figure 1
shows the enclosure health light-emitting diodes (LEDs) on the enclosure front panel.
Figure 1. Enclosure health LEDs
Table 1 describes the
various LED states that you might observe.
Table 1. Enclosure
health LED indicators
| LED Name |
Color |
States |
| 1 Power |
Green |
- OFF – No external power is supplied to the enclosure.
- ON – Power is supplied to the enclosure and the CPU is active (not in standby) on at least
one node canister.
- SLOW FLASH – Both canisters are in standby mode.
|
| 2 Identify |
Blue |
- OFF – The enclosure is not in an identify state.
- SOLID – The enclosure was identified in response to the management system or the chassis
ecosystem.
|
| 3 Enclosure Fault |
Amber |
- OFF – There are no isolated FRU failures in the enclosure.
- ON –A FRU in the enclosure has failed, and will require service or replacement.
|
