Removing and replacing a display panel assembly

You can remove the display panel assembly from a 5U expansion enclosure.

1. Slide the expansion enclosure out of the rack, as described in Removing a 5U expansion enclosure from a rack.
2. Remove the top cover, as described in Removing and replacing the top cover.
3. Press the release tab at the top of the display panel assembly, as shown in Figure 1.

   

4. Carefully pull the display panel assembly, which is shown in the Figure 2, out of the chassis.

   

Replace the display panel assembly

5. Remove the display panel assembly, which is shown in Figure 2, from its packaging.
6. Carefully align the display panel assembly in the slot at the front of the expansion enclosure, as shown in Figure 3.

   Ensure the display panel assembly, which is shown in Figure 2, faces toward the outside of the chassis.

   

7. Insert the display panel assembly until it clicks into position.
8. Replace the top cover, as described in Removing and replacing the top cover.
9. Ensure the LEDs on the display panel are lit correctly. See High density expansion enclosure LEDs and indicators for details.