Portset commands

Use the portset commands to configure and manage portsets.

lsportset
Use the lsportset command to list the currently configured portsets. This list shows the ID, portset name, and the number of IP addresses and hosts associated with each portset along with ownership group information.
mkportset
Use the mkportset command to create a new portset.
rmportset
Use the rmportset command to delete the portset. Before deleting the Fibre Channel (FC) port make sure if any Fibre Channel host or Fibre Channel IO port under the portset is defined.
chportethernet
Use the chportethernet command to configure the permitted uses of ethernet ports and the maximum transmission unit (MTU) setting for the ethernet. Changing MTU value of a ethernet port through chportethernet command takes some time to configure MTU in the background. If you want to change the MTU of the ethernet ports, you need to wait for five seconds to reflect the MTU change on the system.
chportset
Use the chportset command to modify the attributes of a portset.
lsportethernet
Use the lsportethernet command to list the properties and status of the storage system ethernet ports.
lsfcportsetmember
Use the lsfcportsetmember command to list the mapping between Fibre Channel I/O port ID and portset objects.
addfcportsetmember
Use the addfcportsetmember command to associate a Fibre Channel I/O port ID with portset. A Fibre Channel I/O port ID can be associated to multiple portsets at the same time and this association applies to all nodes in a cluster.
rmfcportsetmember
Use the rmfcportsetmember command to remove Fibre Channel IO port ID association from the portset.

Parent topic: CLI reference