Enclosure commands

Use the enclosure commands to manage enclosures and their properties.

addcontrolenclosure - Deprecated
The addcontrolenclosure command will fail as additional I/O groups cannot be added to a system. For more details, see Flash Grid.
chenclosure
Use the chenclosure command to modify enclosure properties.
chenclosurecanister
Use the chenclosurecanister command to modify the properties of an enclosure canister.
chenclosuredisplaypanel
Use the chenclosuredisplaypanel command to modify the properties for an enclosure display panel.
chenclosurefanmodule
This command is for use with products that have hot-swappable fan assemblies. Use the chenclosurefanmodule command to modify the properties of an enclosure fan module.
chenclosuresem
Use the chenclosuresem command to modify the properties of an enclosure SEM.
chenclosureslot
Use the chenclosureslot command to modify the properties of an enclosure slot.
sainfo chenclosurevpd (Deprecated)
The sainfo chenclosurevpd command is deprecated. Use the chvpd command instead.
lsenclosure
Use the lsenclosure command to view a summary of the enclosures.
lsenclosurebattery
Use the lsenclosurebattery command to display information about the batteries. The batteries are located in the node canisters.
lscontrolenclosurecandidate
Use the lscontrolenclosurecandidate command to display a list of all control enclosures you can add to the current system.
lsenclosurecanister
Use the lsenclosurecanister command to view a detailed status for each canister in an enclosure.
lsenclosuredisplaypanel
Use the lsenclosuredisplaypanel command to display information about the display panel in an enclosure.
lsenclosurefanmodule
Use the lsenclosurefanmodule command to report the status of each fan module and the contained fans in an enclosure.
lsenclosurepsu
Use the lsenclosurepsu command to view information about each power-supply unit (PSU) in the enclosure.
lsenclosuresem
Use the lsenclosuresem command to display the status (or any pertinent data) about secondary expander modules (SEM) in a 5U92 system.
lsenclosureslot
Use the lsenclosureslot command to view information about each drive slot in the enclosure.
lsenclosurestats
Use the lsenclosurestats command to display the most recent values (averaged) of all enclosure statistics. It can also display a history of those values for any subset of the available statistics.
lssasfabric
Use the lssasfabric command to see which canisters are visible to a node, and the order of these canisters.
resetleds
Use the resetleds command to simultaneously switch off all light-emitting diodes (LEDs) in the system, including node battery LEDs.
triggerenclosuredump
Use the triggerenclosuredump command to force the specified enclosure or enclosures to dump data.

Parent topic: CLI reference