530 A problem with one of the node's power supplies has been detected.

Explanation

The 530 error code is followed by two numbers. The first number is either 1 or 2 to indicate which power supply has the problem.

The second number is either 1, 2 or 3 to indicate the reason.
1
The power supply is not detected.
2
The power supply failed.
3
No input power is available to the power supply.

If the node is a member of a cluster, the cluster reports error code 1096 or 1097, depending on the error reason.

The error will automatically clear when the problem is fixed.

User response

  1. Ensure that the power supply is seated correctly and that the power cable is attached correctly to both the node and to a power source.
  2. If the error has not been automatically marked fixed after two minutes, note the status of the three LEDs on the back of the power supply.
  3. If the power supply error LED is off and the AC and DC power LEDs are both on, this is the normal condition. If the error has not been automatically fixed after two minutes, replace the system board.
  4. Follow the action specified for the LED states noted in the list below.
  5. If the error has not been automatically fixed after two minutes, contact support.

Possible Cause-FRUs or other:

Reason 1: A power supply is not detected.

  • Power supply (19%)
  • System board (1%)
  • Other: Power supply is not installed correctly (80%)

Reason 2: The power supply has failed.

  • Power supply (90%)
  • Power cable assembly (5%)
  • System board (5%)

Reason 3: There is no input power to the power supply.

  • Power cable assembly (25%)
  • UPS-1U assembly (4%)
  • System board (1%)
  • Other: Power supply is not installed correctly (70%)