1360 A SAN transport error occurred.

Explanation

This error has been reported because the 2145 performed error recovery procedures in response to SAN component associated transport errors. The problem is probably caused by a failure of some other component on the SAN or system.

User response

  1. View the event log entry to determine the node that logged the problem. Determine the node or controller that the problem was logged against.
  2. Perform Fibre Channel (FC) switch problem determination and repair procedures for the switches connected to the node or controller.
  3. Perform FC cabling problem determination and repair procedures for the cables connected to the node or controller.
  4. If any problems are found and resolved in step 2 and 3, mark this error as fixed.
  5. If no switch or cable failures were found in steps 2 and 3, take an event log dump. Call your hardware support center.
  6. Run the fix procedure from the event log menu in the GUI.

Possible Cause-FRUs or other:

  • None

Other:

  • FC switch
  • FC cabling