1300 IO port configuration issue

Explanation

A port that was configured for N_Port ID virtualization (NPIV) is offline.

User response

Complete the following procedures:
  1. Check the switch configuration to ensure that NPIV is enabled and that resource limits are sufficient.
  2. Run the detectmdisks command and wait 30 seconds after the discovery completes to see if the event fixes itself.
  3. If the error is displayed for an NVMe port on a Fibre Channel adapter, check that the Fibre Channel adapter supports NVMe. If an NVMe port is offline, the Fibre Channel adapter might not support NVMe.
  4. If the event does not fix itself, contact IBM® Support.