1065 One or more Fibre Channel ports are running at lower than the previously saved speed.

  Explanation
The Fibre Channel ports will normally operate at the highest speed permitted by
    the Fibre Channel switch, but this speed might be reduced if the signal quality on the Fibre
    Channel connection is poor. The Fibre Channel switch could have been set to operate at a lower
    speed by the user, or the quality of the Fibre Channel signal has
   deteriorated.

  User response

Run the fix procedure from the event log menu in the GUI.
Possible Cause-FRUs or other:
2072 - Node Canister (100%)

    Fibre Channel cable (50%)

    Small Form-factor Pluggable (SFP) connector (20%)

    4-port Fibre Channel host bus adapter (5%)

Other:

    Fibre Channel switch, SFP connector, or GBIC (25%)