lsip
Use lsip command to list the currently configured IP addresses. IP addresses can be assigned to different portset types which determine if the IP address is used for host attachment, storage virtualization, IP replication or management.
Syntax
Parameters
- -delim delimiter
- (Optional) Specify a delimiter to separate data in the output.
- -nohdr
- (Optional) Suppress the headings in the output.
- -filtervalue attribute=value
- (Optional) Specifies a list of one or more filters. Only objects with a value that matches the filter attribute value are displayed.
- -filtervalue?
- (Optional) Displays a list of valid filter attributes.
- object_id
- (Optional) Specifies the ID of an object.
Note: Restricted users can view only those IP addresses that they own or IP addresses that are
globally owned, but cannot view IP addresses assigned to other owners.
Description
This table provides the attribute values that can be displayed as output view data.
| Attribute | Description |
|---|---|
| port_id | Indicates the ID of the port. The ID can be a value in the range 1 - 28. |
| io_group_id | Indicates the I/O group ID of the ethernet port. The value must be a number in the range 0 - 3. |
| io_group_name | Indicates the name of the I/O group ID of the ethernet port. The I/O group ID can consist of a string of 1 - 64 ASCII characters. |
| node_id | Indicates the ID of the node. The value can be set to blank or can consist of 64 bits. |
| node_name | Indicates the name of the node. The value can be set to blank or can consist of a string of 1 - 64 ASCII characters. |
| portset_id | Indicates the ID of the portset. The value must be a number in the range 0 - 63 or 72. |
| portset_name | Indicates the name of the portset. The portset name can consist of a string of 1 - 64 ASCII characters. |
| ip_address_id | Indicates an IPv4 address or IPv6 address. You can set the address 192.168.1.52 or fc00:0000:0000:0000:445a:0a17:fcf7:0237 format. |
| prefix | Indicates the prefix of subnet. The value must be a number in the range 1 - 128. |
| vlan | Displays the virtual local area network (VLAN) ID associated with the IP address on this port (a numeric character in the range 1 - 4094). |
| gateway | Indicates the IPv4 or IPv6 gateway. The value is set to blank (no gateway) or
string in either 192.168.1.52 format or
fc00:0000:0000:0000:445a:0a17:fcf7:0237 format. |
| owner_id | Indicates the ID of ownership group. The value must be a number in the range 0 - 63. |
| owner_name | Indicates the name of the ownership group. The ownership group name can consist of a string of 1 - 64 ASCII characters. |
| lossless | Displays whether priority flow control (PFC) is enabled for this IP address
for the portset type or the reason of lossless not enabled. String can be on or off
(off-eth_port_not_enabled_for_pfc, off-vlan_not_configured off-not_supported) Note: Setting COS value
for IP replication is not supported. Hence for IP replication portsets, the value will always be
off-not_supported.
|