Adding a Juniper NSM Profiler scanner

Administrators can add a Juniper NSM Profiler scanner to poll for vulnerability data with JDBC.

1. Click the Admin tab.
2. Click the VA Scanners icon.
3. Click Add.
4. In the Scanner Name field, type a name to identify your Juniper NSM Profiler server.
5. From the Managed Host list, select an option that is based on one of the following platforms:
   • On the QRadar® Console, select the managed host that is responsible for communicating with the scanner device.
   • On QRadar on Cloud, if the scanner is hosted in the cloud, the QRadar Console can be used as the managed host. Otherwise, select the data gateway that is responsible for communicating with the scanner device.
   Certificates for your Juniper NSM Profiler scanner must reside on the managed host selected in the Managed Host list.
6. From the Type list, select Juniper NSM Profiler Scanner, and then configure the parameters.

   Parameter	Description
   Server Host Name	The IP address or host name of the Juniper NSM Profiler scanner that contains the vulnerabilities you want to retrieve.
   Database Username	The user name that is required to access the Juniper NSM Profiler scanner.
   Database Password	The password that is required to access the Juniper NSM Profiler scanner.
   Database Name	The name of the database on the above server that contains the Juniper NSM Profiler scanner data.

7. To configure a CIDR range for your scanner complete the following steps:
   1. In the text field, type the CIDR range for the scanner or click Browse to select a CIDR range from the network list.
   2. Click Add.
8. Click Save.