MAP6xxx range

Edit online

MAP6000 Entry point for analyzing management console problems
MAP6010 Displaying the HMC MAC address for the customer connection
Use this procedure to help the customer determine the Media Access Control (MAC) address of the HMC port they connect to before the physical connection is made.
MAP6060 Management console login and login problems at the management console server
MAP60A0 Display the HMC role selection
Determine the HMC role (HMC1 primary or HMC2 secondary) using the HMC utilities.
MAP6105 Display and record the HMC customer configuration and network settings information
Use this MAP to display information about the HMC customer configuration and network settings and then record this information on paper.
MAP6106 Restoring the HMC customer communication and network settings
Use this MAP to restore the HMC customer communication and network settings.
MAP6110 Changing the management console customer network configuration
This MAP provides guidance on how to change the management console customer network configuration. This procedure can be performed concurrent with host access to the attached storage facilities. However, the customer will lose access to the management console during the procedure.
MAP6203 Reloading the management console LIC bundle (Models A0x)
Use this MAP to reinstall the licensed internal code for the management console.
MAP6204 Rebuilding the peer HMC (Models A0x)
Use this MAP to rebuild a partner IBM Power HMC (7063-CR2) from a running HMC, by using the "Rebuild Peer HMC" function.
MAP6205 Updating the management console LIC bundle
Use this MAP during a management console rebuild, to update the licensed internal code on the management console to match the storage facility.
MAP6210 Restore HMC Critical Console Data from LPAR
Use this MAP to restore the HMC critical console data from the LPAR. This restoration is normally needed only after the HMC hard drive code is reloaded.
MAP6220 Reloading the management console with no backup data
Use this MAP to reinstall the Licensed Internal Code for the management console only when the restore HMC critical console data from the LPAR failed.
MAP6520 Management Console power problem
MAP6540 Keyboard/display problem
Use this procedure to resolve problems with the keyboard or display.
MAP6580 Customer Ethernet connection problem
Use this procedure to analyze problems with management console (HMC) Ethernet connection to the customer LAN.
MAP6600 Resetting the managed system connection from the management console
Use this procedure to reset the managed system connection from the management console.
MAP6620 Rebuilding managed system information
The Rebuild Managed System action is used to extract the configuration information from the managed system and rebuild the information on the management console.
MAP6630 Recovering partition data on a CEC enclosure
This procedure provides guidance on how to recover profile data on a CEC enclosure if the data becomes damaged.
MAP6640 Shutting down, rebootingrestarting, and logging off the management console
Perform the steps in this section to log off the management console.
MAP6650 Correcting the CEC enclosure operating state
Use these procedures to put the CEC enclosure back to a correct state.
MAP6670 Viewing information about the managed system
View information about the managed system's configuration and capabilities. Any user can view managed system properties.
MAP6680 Backing up HMC critical console data
The backup function saves the management console data that is stored on the management console hard disk to LPAR boot drives.
MAP6690 Viewing recent management console activity
To view a log of recent management console activity, you can view console events. Each event has an associated time stamp.
MAP66B0 Password management
MAP66C0 Managed system states displayed by the HMC
The state of the managed system is displayed for the State label.
MAP6700 Viewing vital product data
Use this procedure to view the vital product data.
MAP6710 Viewing progress indicator from previous boot
Use the procedure in this section to view the progress indicator that displayed in the control panel during the previous failed boot.
MAP6720 Viewing progress indicator history
Use this section to view progress codes that appeared in the control panel display during the last boot. The codes display in reverse chronological order.
MAP6800 Management console problem determination
This MAP is used to troubleshoot problems with the management console.
MAP6F00 Accessing the ASMI
There are three methods to access the Advanced System Management Interface on the CEC enclosure service processor FRU.
MAP6F10 Accessing the ASMI using the management console
To access the Advanced System Management Interface (ASMI) using the management console, complete the following steps in this section.
MAP6F20 Accessing the ASMI by using a web browser
Complete the tasks to set up the web browser for direct or remote access to the ASMI.
MAP6F30 Accessing the ASMI using an ASCII terminal emulator
Only if directed by your next level of support, it is possible to use a standard laptop with terminal emulator software installed to access the CEC enclosure ASMI menus.

Parent topic: M Procedures and MAPs