MAP5xxx range

Edit online

MAP5230 Isolating a fixed block read data failure
MAP5240 Customer data checks
A data check failure caused customer data to be unreadable.
MAP5250 Isolating a Metadata check failure
MAP5300 Fibre Channel link fault
Link incidents are problems that are not automatically detected, isolated, and reported by any one single node on the optical link. They occur on an interface and might cause multiple nodes to detect different types of link incidents. Each node that detects and reports a link incident generates its own link incident.
MAP5305 Fibre Channel bit error rate test failure
The Bit Error Rate Test was run and the Fibre Channel link that the test was run on could not transmit fibre frames.
MAP5340 CKD read data failure
You are here to resolve a Data Path failure that has been logged with one of the SRC values listed below. An action to repair hardware or microcode is necessary. The action may require the repair of another serviceable event that needs repair. The failure may have caused customer data to be unreadable. If this occurs the customer must restore the data after the hardware or microcode repair action is complete.
MAP5410 Fibre Channel bit error validation
Bit Error Rate Threshold incidents are caused by specific conditions at an interface or along a line which can cause bits to be received or interpreted incorrectly.
MAP5430 Host Fibre Channel fails to recognize DS8000 LUNs
You are here to resolve a host failure to recognize LUNs configured on a DS8000® Fibre Channel.
MAP5440 Fibre Channel host card reports a loss of light
A Fibre Channel host card in the storage facility detected and reported a loss of light from an attached host system. When a storage facility Fibre Channel host card detects a loss of light, the problem is normally external to the storage facility. This problem is reported to the host system as a status condition. A serviceable event is not created for this condition. A separate serviceable event is created if the Fibre Channel host card detects an internal operational error.

Parent topic: M Procedures and MAPs