MAP1xxx range

Edit online

MAP1100 View storage facility state (end of call)
An all-in-one service utility function that displays the storage facility state, similar to the 2105 End of Call.
MAP1110 SIM generation and interpretation for z/OS
SIM generation for the storage facility is no longer intended as a mechanism to provide notification of the need for service, as it was for earlier generations of IBM DASD. SIMs are provided only to support notification for automated-operations monitoring functions that some customers have put in place.
MAP1120 ESSNI server and agent, displaying the state, start, and stop
MAP1140 DS Storage Manager server, displaying the state, start, and stop
MAP1150 Storage facility image control switches
The storage facility image code control switches set determines the code behavior.
MAP1170 LPAR state saves
How to process or generate an LPAR state save.
MAP1200 Prioritizing serviceable events and visual symptoms for repair
Use this procedure if there is more than one serviceable event, visual symptom, or both needing repair.
MAP1205 Special case of replacing multiple high-priority FRUs at the same time
This MAP procedure is only used when directed by the management console GUI while repairing an open serviceable event.
MAP1210 Displaying and repairing a serviceable event
The primary method to repair the storage facility is by using a serviceable event that will guide you through the repair. Serviceable events contain the information and history needed to manage the repair.
MAP1211 Controlling the storage facility power from the management console
The management console (HMC) is the primary method to perform all power control for the customer and service provider.
MAP1212 Displaying Installed Code Levels (LIC, HMC, Storage Manager, Firmware, OS, PTF, SFI, Bundle VRMF, CDA History)
The management console (HMC) is used to display the various code levels that are present on the HMC and the storage facility.
MAP1213 Displaying Server and Partition Properties
It is only necessary to display server or partition properties when directed by a guided service procedure or next level of support.
MAP1214 Run CdaPreVerify
CdaPreVerify is a utility that is used to check the state of the storage facility prior to beginning a CDA LIC update.
MAP1215 Replace a FRU
When an isolation procedure refers to this MAP, there are two methods to replace the failing FRU. One method uses a serviceable event that contains the FRU, and the other method does not.
MAP1216 Displaying primary system reference code (SRC) extension words
Use this procedure if you have been directed to display SRC words of which there can be a total of 10.
MAP1220 Management console GUI menu structure
The management console has a navigation pane options hierarchy that is large and goes several layers deep.
MAP1221 ASMI menu structure
This is an overview of the menu structure (hierarchy) of the advanced system management interface (ASMI).
MAP1225 Closing a serviceable event
Using the management console to close a serviceable event that has been repaired.
MAP1230 Replace a FRU without using a serviceable event
This procedure describes how to replace a FRU when it is not listed as a serviceable event by first selecting a specific FRU by location and then repairing the FRU.
MAP1235 Exit a MAP and repair or close a problem
You have been directed here from a MAP to complete the repair of a serviceable event. The following sections contain the steps to follow when closing a MAP and continuing a repair using the service framework.
MAP1240 Locating FRUs by using identify indicators
MAP1245 Finding FRUs by using location codes
How to convert a location code to the storage facility location that contains the FRU or function.
MAP1250 Activating and deactivating the identify LEDs
MAP1260 Displaying the storage facility image (SFI) state
Use this MAP to display the SFI state to ensure the LPARs are ready for customer use.
MAP1301 Isolating Call Home/remote services failure
You are here to isolate a failure to Call Home. There are two options for Call Home on DS8000® - 'Call Home via modem' and 'Call Home via Internet VPN'. The customer can choose to use either, both or none of these options.
MAP1305 Isolating SNMP notification problems
This MAP provides guidance on how to isolate SNMP Notification problems.
MAP1310 Isolating e-mail notification problems
This MAP provides guidance on how to isolate e-mail notification problems.
MAP1320 Isolating problems using visual symptoms
Visual symptoms should only be used to start a repair if there is no related serviceable event.
MAP1330 SRC BE9Cxxxx
This MAP provides the definitions of the code update SRCs.
MAP1400 Repair a problem found during storage facility installation
This MAP guides you to repair a problem that was found during the 'Install Storage Facility' process and continues with the storage facility installation after the problem is repaired.
MAP1410 Repairing a problem found by the secure data overwrite process
MAP1470 Manually start the Certify drives process
Use this procedure only when you are sent here from another MAP. Use this MAP to manually start the Certify drives process.
MAP1500 Ending a service action
This MAP describes how to end a service action.
MAP1600 If earthquake resistance kit parts prevent you from servicing a rack
You are servicing a rack that is equipped with the optional earthquake resistance kit feature that includes braces on the front and rear of the rack. If a kit part prevents you from servicing the rack, use this MAP to remove it and then reinstall afterward.

Parent topic: M Procedures and MAPs