adddev

Edit online

The adddev command adds a storage system to the heat map transfer utility. Once added, heat map data is transferred to or from the storage system, if valid peer-to-peer remote client relationships (PPRC) exist for the storage system. The connection to the storage system is not tested.

Read syntax diagramSkip visual syntax diagram adddev  -help  -h ?  -dev  dev_id  -hmc1 hmc1_addr-hmc2 hmc2_addr  -user  name  -passwd  password

Parameters

-help | -h | -?
(Optional) Displays heat map transfer utility help for this command.
-dev dev_id
(Required) Specifies the identifier of the storage facility image.
-hmc1 hmc1_addr
(Required) Specifies the IP address of the hardware management console (HMC) for the storage system.
-hmc2 hmc2_addr
(Optional) Specifies the IP address of a secondary HMC) for the storage system.
-user name
(Required) Specifies the name of the user authorized to log into the storage system.
-passwd password
(Required) Specifies the password of the user authorized to log into the storage system.