FEC messages These messages may appear as FEC messages in your SYSLOG or other appropriate output for your site. FECA900EInvalid Column Function value. Valid values: 1, 2, 3, 4FECA901EInvalid Permanent View value. Valid values: Y, NFECA902EInvalid Reset View value. Valid values are Y, NFECA903EInvalid Stop Sorting value. Valid values: Y, NFECA904EInvalid command in FORM displayFECA905EFORM command not supported from CSETUP functionFECA906EInvalid parameter for NROW. Must be numeric.FECA907EInvalid parameter for PROW. Must be numeric.FECA908EInvalid parameter for NROW. Too many digits.FECA909EInvalid parameter for PROW. Too many digits.FECA910ECSETUP command not supported from FORM functionFECA911EInvalid ICR command. Use RIGHT command.FECA912EInvalid ICL command. Use LEFT command.FECA913EFormat mix data element not updated.FECA914EFORM command not supported from FORM functionFECA915EFORM PF keys set; NROW = nrow PROW = prowFECA916EInvalid CNUM parm. Valid parms are ON, OFF, or blank.FECA917EReport width for print too large.FECA918Estring not found. Press PF5 to continue from top.FECA920IChars chars found n timesFECA921IChars chars not found on any linesFECA922ISearch for CHARS chars was successful.FECA923ECheck for misspelled keywords or embedded blanks in search string.FECA924Estring and string cannot both be specified for FIND command.FECA925EPut quotes (" ") around the string of characters to be displayed.FECA926EMaximum parameter length is 80FECA927EInvalid COLS parm. Valid parms are ON, OFF, or blankFECA930INo columns eligible for resizing.FECA931INo columns eligible for sortingFECA932ITBMOD failed. RC=rcFECA933EInvalid column name: missing quoteFECA934EMore than 9 columns specifiedFECA935EInvalid column nameFECA936EInvalid row selection characterFECA937EOnly one row selection allowedFECA938EInvalid commandFECA939ERead of control file failedFECA940EInvalid DB2® Control data setFECA942EIFCARC1=return code IFCARC2=reason codeFECA943EInvalid commandFECA944IEmpty HistoryFECA945EInvalid history size limitFECA946INo DB2® command history output library allocatedFECA947INo DB2® command history input library allocatedFECA948ETBOPEN failed. RC=return codeFECA949EInvalid commandFECA950ENo SSIDs in control fileFECA951IHistory clearedFECA952EUnable to list data sharing members. Display failedFECA953IZero data sharing members foundFECA954EInvalid commandFECA955INo member selectedFECA956EInvalid row selection characterFECA957EOnly one row selection allowedFECA958EInvalid row selection characterFECA959EOnly one row selection allowedFECA960ECannot list commands without SSIDFECA961EInvalid row selection characterFECA962EOnly one row selection allowedFECA963EInvalid commandFEC801EPgm: program name Stmt: statement Type: typeFEC802EAn invalid return code of code was encountered on function function. The error message text follows: text FEC803EThe first character of the command is not a dash. Correct the syntax of the DB2® command and resubmit.FEC804Emessage_textFEC901EThe default load library could not be located.FEC902EA DB2® subsystem ID has to be entered for processing.FEC903EThe default GDG base data set name could not be located.FEC904EThe specified data set could not be opened for I/O.FEC905EAn unexpected return code from VSAM was encountered while doing a read of the control file. RC1=rc RC2=rcFEC906IThe control file record for DB2® subsystem ssid has been successfully updated.FEC907EAn unexpected return code from VSAM was encountered while doing an update operation of the control file. RC1=rc RC2=rcFEC908IThe control file record for DB2 subsystem sys has been successfully added.FEC909EInvalid value. Valid options are 1 and 2.FEC910EAn unexpected return code from VSAM was encountered while doing an add operation to the control file. RC1=rc RC2=rcFEC911EThe (F)IND command was entered but no parameters were specified. FEC912IThe requested find string was not found. FEC913IThe control file record has been successfully updated.FEC914EAn unknown column was specified using the SORT command.FEC915ESORT is not supported for the specified column.FEC916ESort column not entered. Column name or number must be specified.FEC917EPut an ending quote at the end of the string.FEC918CHARS string not found. Press PF5 to continue from top.FEC919chars foundstr not found. Press PF5 to continue from bottom.FEC920EFile tailoring open returned a file tailoring already in progress conditionFEC921EFile tailoring open returned the output file already in use condition -- ENQ failedFEC922EFile tailoring open returned the skeletal file or output file not allocated conditionFEC923EFile tailoring open returned a severe error conditionFEC924EFile tailoring open returned an unknown code -- severe errorFEC925EFile tailoring close returned a file not open condition -- severe errorFEC926EFile tailoring close returned an output file in use conditionFEC927EFile tailoring close returned a skeletal file or output file not allocated conditionFEC928EFile tailoring close returned a severe errorFEC929EFile tailoring close returned an unknown code -- severe errorFEC930EFile tailoring close returned an output member exists in the output library and NOREPL was specifiedFEC931EFile tailoring include returned a skeleton does not exist conditionFEC932EFile tailoring include returned a skeleton in use -- ENQ failed conditionFEC933EFile tailoring include returned a data truncation or skeleton library or output file not allocated conditionFEC934EFile tailoring include returned a severe error conditionFEC935EFile tailoring include returned an unknown condition -- severe errorFEC936EAllocation error - The ISPFILE DD is already allocated and cannot be deallocated - Process not completedFEC937EAllocation Error - An error was encountered allocating the ISPWRK1 or ISPWRK2 DD - Process not completedFEC938EField Required - The data set entered is a partitioned data set and the member name is requiredFEC939EThe only valid values are "T" for tracks and "C" for cylindersFEC940EThe specified data set could not be found in the MVS™ catalog.FEC941EThe RFIND key works only after a FIND character string is entered.FEC942EInvalid Sort number. Enter a valid digit.FEC943ESame Sort number entered twiceFEC944ESort sequence skips a number.FEC945EInvalid Dir entered. Must be A or D (ascending/descending).FEC946EDir not valid without Ord.FEC947EMax Sort Columns exceeded. Sorting first 10 columns.FEC948EFix Columns cannot exceed screen size.FEC950EInvalid selection character. "F" and "U" are valid.FEC951EInvalid entry. Must be numeric.FEC952EInvalid entry for fixed column.FEC953EInvalid entry for unfixed column.FEC954EInvalid value entered for column size: non-numeric data.FEC955EInvalid value entered for column size: out of range.FEC956ETotal fixed column sizes cannot exceed screen size.FEC957ENew configuration makes this column size invalid.FEC958EColumn does not fit in unfixed area in new configuration.FEC959ENew configuration makes this column size invalid.FEC960EInvalid fixed selections. Would not leave enough space for this column.FEC962EDuplicate Cmd values entered.FEC963ECursor not on data element.FEC964EInvalid scroll amount for CRIGHT. Must be numeric.FEC965EInvalid scroll amount for CLEFT. Must be numeric.FEC966EInvalid parameter to ICRIGHT; must be numeric.FEC967EParameter to ICRIGHT too long. Invalid.FEC968EParameter to ICRIGHT is zero. Invalid.FEC969EICRIGHT: unspecified column.FEC971EICRIGHT: Column number specified is too big.FEC972EInvalid parameter to ICLEFT; must be numeric.FEC973EParameter to ICLEFT too long. Invalid.FEC974EParameter to ICLEFT is zero. Invalid.FEC975EICLEFT: unspecified column.FEC976EColumn selected not sortable. Sort selection list presented.FEC977EICLEFT: Column number specified is too big.FEC978EInvalid column number specified for SORT (not numeric).FEC979EInvalid column number specified. Too many digits.FEC980EInvalid column number specified: zero.FEC981EInvalid column number specified: out of range.FEC982EInvalid view. View adjusted.FEC983EInvalid view. View deleted.FEC984EUnexpected return code from TBSTATS: rcFEC985EView Library not allocated.FEC986ETBCREATE failed. RC=rcFEC987ETBOPEN failed. RC=rcFEC988ETBGET failed. RC=rcFEC989ETBMOD failed. RC=rcFEC990ETBCLOSE failed. RC=rcFEC991ETBDELETE failed. RC=rcFEC992EInvalid selection.FEC993IPermanent view not supported.FEC994EInvalid row number.FEC995EInvalid column number.FEC996EInvalid digits.FEC997EToo many digits.FEC998EZero parameter invalid.FEC999EInvalid parameter count: must be either two or zero parms.Parent topic: Messages