Deleting accelerators

You delete accelerators by using the delete command.

Procedure

  1. On the DB2 Administration Menu (ADB2) panel, specify option Z, and press Enter.
    The System Administration (ADB2Z) panel is displayed.
  2. Specify option AC, and press Enter.

    The DB2 Accelerators (ADBPZAC) panel is displayed, as shown in the following figure.

    Figure 1. DB2 Accelerators (ADBPZAC) panel
     ADBPZAC n --------------- DB2X DB2 Accelerators -------------- Row 1 to 2 of 2 
 Command ===>                                                  Scroll ===> PAGE 
                                                                                
 Commands: DIS  ADD                                                             
 Line commands:  STA - Start accelerator  STO - Stop accelerator  T - Tables    
  DIS - Display accelerator  L - Location  AT - Accelerated tables  DEL - Delete
  ? - Show all line commands                                                    
                                                                                
 Select Accelerator Name Location         Type IP Address      Port
        *                *                *    *               *
 ------ ---------------- ---------------- ---- --------------- -----                                      
        ACC1                              V                                      
        ACC2             ACC2             R    9.116.85.193    1277
  3. In the Select column, specify TASK beside the accelerator for which you want to retrieve task information.

    The Accelerator Tasks panel (ADBPZA2) panel is displayed, as shown in the following figure.

    Figure 2. Accelerator Tasks panel (ADBPZA2) panel
    ADBPZA2 n --------------- DB2X Accelerator Tasks ------------ Row 1 to 10 of 10 
Command ===>                                                    Scroll ===> CSR  

Accelerator name: ACC1
                                                                              
Sel Id         Type             User      Pct    Age Status                     
    *          *                *           *      * *
--- ---------> ---------------> -------- ---- -----> ------------------------->                     
    505542     LOAD             SYSADM    100      0 Collecting current task  
.
.
.
  4. Specify DEL beside the accelerator that you want to delete, and press Enter.
    The Delete Accelerator confirmation (ADB2CONF) panel is displayed, as shown in the following figure.
    Figure 3. Delete Accelerator confirmation (ADB2CONF) panel
    ADB2CONF  -- DB2X Delete accelerator confirmation ----------------- 17:01
                                                                         
Confirm the deletion of accelerator below.                               
Accelerator: TEST4                                                       
                                                                         
                                                                         
                                                                         
Select a choice                                                          
  1.  Continue with deletion                                             
  2.  Cancel                                                             
                                                                         
                                                                         
                                                                         
                                                                         
 F1=Help     F2=Split    F3=Exit     F9=Swap    F12=Cancel
  5. Specify one of the following options, and press Enter.
    OptionDescription
    1 Confirms the deletion.
    2 Cancels the deletion.
    If you specify option 1, the following message is displayed:
    Delete stmt executed