DB2 Version 9.7 for Linux, UNIX, and Windows

Installation requirements for DB2 servers and IBM data server clients (Linux)

Before you install DB2® database products on Linux operating systems, ensure that the system you choose meets the necessary operating system, hardware, software, and communications requirements.

Important: For the most up-to-date installation requirements for DB2 database products, you must start using the System requirements for IBM® DB2 for Linux, UNIX, and Windows and System requirements for IBM DB2 Connect™ technotes. These technotes use IBM Software Product Compatibility Reports (SPCR). With the SPCR tool, you can locate and find complete lists of supported operating systems, system requirements, prerequisites, and optional supported software for DB2 database products. This DB2 Information Centre topic might be removed in a future release or fix pack.

DB2 database products are available in several different editions. Some DB2 database products and features are only available on specific operating systems.

DB2 database products are supported on the following hardware:

x86 (Intel Pentium, Intel Xeon, and AMD) 32-bit Intel and AMD processors
x64 (64-bit AMD64 and Intel EM64T processors)
POWER® ( iSeries®, pSeries, System i®, System p®, and POWER Systems that support Linux)
System z®: zEnterprise (z196, z114, zBX, EC12), System z10® or System z9®

The minimum supported operating systems for Linux include:

Red Hat Enterprise Linux (RHEL) 5 Update 2.0.4
SUSE Linux Enterprise Server (SLES) 10 Service Pack 2
SUSE Linux Enterprise Server (SLES) 11
Ubuntu 8.0.4.1

For the most up-to-date requirements for DB2 database products, see http://www.ibm.com/support/docview.wss?uid=swg27038033.

Note:

Version 9.7 Fix Pack 2 and later fix packs include an updated version of IBM Tivoli® System Automation for Multiplatforms (SA MP) that you can use in environments with SLES 11 or POWER7® systems. For more information, see "Installing IBM Tivoli System Automation for Multiplatforms (SA MP)" or "Upgrading IBM Tivoli System Automation for Multiplatforms (SA MP)".

Multithreaded architecture limitations

If you are installing a DB2 32-bit database product on a Linux operating system, consider upgrading to a 64-bit operating system and installing the DB2 64-bit database product instead. The multithreaded architecture generally simplifies memory configuration. However, this could affect the memory configuration of 32-bit DB2 database servers. For example:

Private memory for agent threads is allocated within a single process. The aggregate of all private memory allocations for database agents might not fit in a single process memory space.
Support for multiple databases is limited because all database shared memory segments for all databases are allocated in a single process. You might need to reduce the memory usage for some databases in order to activate all databases successfully at the same time. However, the database manager performance might be impacted. Another alternative is to create multiple instances and catalog the databases across the instances. However, sufficient system resources is required to support this configuration.

Distribution Requirements

You should update your kernel configuration parameters before installing a DB2 database product. The default values for particular kernel parameters might not be sufficient when running a DB2 database system.

You might also have other products or applications that require Linux system resources. You should modify the kernel configuration parameters based on the needs of your Linux system working environment.

The kernel configuration parameters are set in /etc/sysctl.conf.

Refer to your operating system manual for information about setting and activating these parameters using the sysctl command.

Package requirements

The following tables list the package requirements for SLES and RHEL distributions:

libpam.so.0 (32-bit) is required for DB2 database servers to run 32-bit non-SQL routines and JDBC type 2 driver applications in 32-bit JDK.
libaio.so.1 is required for DB2 database servers using asynchronous I/O.
libstdc++.so.5 is required for DB2 Net Search Extender
libstdc++.so.6.0.8 is required for DB2 database servers and clients. However, if IBM Tivoli System Automation for Multiplatforms, or, IBM Tivoli Monitoring for Databases: DB2 Agent is used, libstdc++.so.5 is needed.
libstdc++33 and libstdc++43 are required for SLES 11.
The ksh93 Korn shell is required for SUSE10 and RHEL5 systems. The pdksh Korn Shell package is required for all other DB2 database systems.

Package requirements for SLES, RHEL, and Ubuntu

Package name	Description
libaio	Contains the asynchronous library required for DB2 database servers.
compat-libstdc++	Contains libstdc++.so.5 (not required for Linux on POWER or SLES 11)
libstdc++	Contains libstdc++.so.6
pdksh or ksh93	Korn Shell

The following tables list the package requirements for SUSE Linux and Red Hat distributions for DB2 partitioned database servers.

The ksh93 Korn shell is required for SUSE10 and RHEL5 systems. The pdksh Korn Shell package is required for all other DB2 database systems.
A remote shell utility is required for partitioned database systems. DB2 database systems support the following remote shell utilities:
- rsh
- ssh
By default, DB2 database systems use rsh when executing commands on remote DB2 nodes, for example, when starting a remote DB2 database partition. To use the DB2 database system default, the rsh-server package must be installed (see table below). More information about rsh and ssh is available in the DB2 Information Center.
If you choose to use the rsh remote shell utility, inetd (or xinetd) must be installed and running as well. If you choose to use the ssh remote shell utility, you need to set the DB2RSHCMD communication variable immediately after the DB2 installation is complete. If this registry variable is not set, rsh is used.
The nfs-utils Network File System support package is required for partitioned database systems.

All required packages should be installed and configured before continuing with the DB2 database system setup. For general Linux information, see your Linux distribution documentation.

Package requirements for SUSE Linux

Package name	Description
pdksh or ksh93	Korn Shell.
openssh	This package contains a set of server programs which allow users to run commands on (and from) remote computers via a secure shell. This package is not required if you use the default configuration of DB2 database systems with rsh.
rsh-server	This package contains a set of server programs which allow users to run commands on remote computers, login in to other computers, and copy files between computers (rsh, rexec, rlogin, and rcp). This package is not required if you configure DB2 database systems to use ssh.
nfs-utils	Network File System support package. It allows access to local files from remote computers.

Package requirements for Red Hat

Directory	Package name	Description
/System Environment/Shell	pdksh or ksh93	Korn Shell.
/Applications/Internet	openssh	This package contains a set of client programs which allow users to run commands on a remote computer via a secure shell. This package is not required if you use the default configuration of DB2 database systems with rsh.
/System Environment/Daemons	openssh-server	This package contains a set of server programs which allow users to run commands from a remote computer via a secure shell. This package is not required if you use the default configuration of DB2 database systems with rsh.
/System Environment/Daemons	rsh-server	This package contains a set of programs which allow users to run commands on a remote computer. Required for partitioned database environments. This package is not required if you configure DB2 database systems to use ssh.
/System Environment/Daemons	nfs-utils	Network File System support package. It allows access to local files from remote computers.

Software considerations

(Clients only) If you plan to use Kerberos Authentication, you require IBM Network Authentication Service client v1.4 or later.
One of the following browsers is required to view online help and to run First Steps (db2fs):
- Firefox 2.0 and later
- Mozilla-based browsers 1.7 and later
An X Window System software capable of rendering a graphical user interface is required if:
- you want to use the DB2 Setup wizard to install a DB2 database product on Linux or UNIX operating systems, or
- you want to use any DB2 graphical tools on Linux for x86 and Linux on AMD 64/EM64T.
Micro Focus does not offer support for any of its COBOL compiler products on SLES 11.
If you plan on using transparent Lightweight Directory Access Protocol (LDAP) on RHEL 5, you must install nss_ldap-253-35.el5 or later.

Security-enhanced Linux considerations

On RHEL systems, if Security-enhanced Linux (SELinux) is enabled and in enforcing mode, the installer might fail due to SELinux restrictions.

To determine if SELinux is installed and in enforcing mode, you can do one of the following:

check the /etc/sysconfig/selinux file
run the sestatus command
check the /var/log/messages file for SELinux notices.

To disable SELinux, you can do one of the following:

set it in permissive mode and run the setenforce 0 command as a superuser
modify /etc/sysconfig/selinux and reboot the machine.

If your DB2 database product installs successfully on a RHEL system, DB2 processes will run in the unconfined domain. To assign DB2 processes to their own domains, modify the policy. A sample SELinux policy is provided in the sqllib/samples directory.