LIC1000-1999

LIC Message ID Message Explanation User Response

LIC1052E

You must be root to execute this program.

This program can only be run under the root user ID. Special privileges are required to execute this program.

Login as root and issue the command again.

LIC1304E

Unexpected error.

The tool encountered an unexpected system error.

Contact your DB2 service representative.

LIC1305E

The profile registry was not found.

The target machine does not have a profile registry setup.

Create the registry on the target machine by installing DB2.

LIC1309E

System error.

The tool encountered an operating system error.

A system error was encountered during registry access. Ensure that there is enough space on the file system where the registry is located, and that there is a valid LAN connection if the registry is remote.

LIC1400N

The db2licm command failed because an invalid syntax was specified.

You can add, remove, list, and modify licenses by calling the db2licm command.

This message is returned when the db2licm command is invoked with an incorrect syntax:

  • Required parameters are missing
  • Conflicting parameters are specified together
  • An invalid value is specified for a parameter

Optional: Review the command syntax by calling the db2licm command, specifying the -? parameter.

Enter the command again, specifying valid parameters.

LIC1401I

Command line DB2 License Manager.

The db2licm tool performs basic license functions. It adds, removes, lists, and modifies licenses registered on the local system. Execute db2licm tool with -l parameter to find out the product identifier for your product:


 db2licm [-a filename]
         [-e product-identifier HARD | SOFT]
         [-p product-identifier
         CONCURRENT | OFF]  
         [-t database-name username password]
         [-r product-identifier]
         [-u product-identifier num-users]
         [-c product-identifier num-connectors]
         [-m product-identifier num-cores]
         [-g filename]
         [-x]
         [-l][show detail]
         [-v]
         [-?]

The command options are:

-a

Adds a license for a product. Specify a file name containing valid license information. This can be obtained from your licensed product CD or contact your IBM representative or authorized dealer.

-e

Updates the enforcement policy on the system. Valid values are: HARD and SOFT. HARD specifies that unlicensed requests will not be allowed. SOFT specifies that unlicensed requests will be logged but not restricted.

-p

Updates the license policy type to use on the system. The keyword CONCURRENT can be specified for concurrent user policy. Specify OFF to turn off all policies.

-t

Displays the user data that is stored in all the user tables of the specified database. Provides data consumption for Terabyte license usage scenarios. Specify the database, user name, and password.

-r

Removes the license for a product. Specify the product identifier.

-u

Updates the number of user entitlements that have been purchased. Specify the product identifier and the number of users.

-c

Updates the number of connector entitlements that have been purchased. Specify the product identifier and the number of connector entitlements.

-m

Updates the number of cores that have been purchased. Specify the product identifier and the number of cores.

-g

Generates compliance report. Specify file name where output is to be stored.

-x

Resets license compliance information for the purposes of license compliance report.

-l[show detail]

Lists all the products with available license information, including the product identifier. Specify [show detail] to view detailed information about licensed features (if any).

-v

Displays version information.

-?

Displays help information. When this option is specified, all other options are ignored, and only the help information is displayed.

LIC1402I

License added successfully.

LIC1403I

License removed successfully.

LIC1404N

Product identifier not found.

The given identifier is invalid, or a license for this product was not found.

Verify the license keys and product identifiers by listing licenses using the db2licm command with the -l parameter.

LIC1405I

License policy type updated successfully.

LIC1406N

Invalid license policy type.

The license policy type that was entered was not valid for the product specified.
Please enter a valid license policy. Options are:
  • CONCURRENT
  • OFF

LIC1407N

You are trying to register an invalid license certificate file, license-certificate-file-name.

Either the license file is not from the current version, or the license file is corrupted. You can check the current version by running db2licm -v

Obtain the valid license file for the current version from the Activation CD, and rerun the db2licm command. For example, db2licm -a license-certificate-file-name

LIC1408N

The file file-name could not be opened. Enter the name of a file that exists and can be opened and try the command again.

The file is not found or access to the file is denied.

Enter the name of a file that exists and can be opened and try the command again.

LIC1409N

Invalid enforcement policy type.

The enforcement policy type specified is not valid for this product.

Please enter a valid enforcement policy type that is supported by the specified product.

LIC1410I

Concurrent entitlements updated successfully.

LIC1411I

Enforcement policy type updated successfully.

LIC1412W

A hard stop enforcement policy has been set. This enforcement policy stops unlicensed requests.

You issued the db2licm command with the -e parameter, to update the enforcement policy, and specified the value HARD. (For example, db2licm -e db2ese HARD.) The value HARD specifies that unlicensed requests will not be allowed.

As a mechanism for you to keep track of, and differentiate, the database products and features installed on your system, it is recommended that you register the license key for each database product and feature.

If you want unlicensed requests to be logged but not restricted, change the enforcement policy to SOFT. For example, db2licm -e db2ese SOFT

LIC1413W

A soft stop enforcement policy has been set. This enforcement policy specifies that unlicensed requests will be logged but not restricted.

You issued the db2licm command with the -e parameter, to update the enforcement policy, and specified the value SOFT. (For example, db2licm -e db2ese SOFT.) The value SOFT specifies that unlicensed requests will be logged but not restricted.

If you want unlicensed requests to be stopped, you must change the enforcement policy to HARD. For example, db2licm -e db2ese HARD.

LIC1416N

The license could not be added automatically. Return code: return-code.

You can perform basic license functions such as adding, removing, listing, or modifying licenses and policies by using the db2licm command.

Add the license by using the db2licm command.

LIC1417N

The specified license could not be removed. Return code: return-code.

You can performs basic license functions such as adding, removing, listing, or modifying licenses and policies by using the db2licm command.

This message is returned when removing a license fails.

Verify whether the license for this product exists by using the db2licm command.

LIC1418I

The number of licensed processors on this system has been updated successfully.

LIC1419N

There was an error updating the number of licensed processors. The return code is return-code.

LIC1420N

This product does not support this type of license policy.

The license policy specified does not apply to this product or is not supported.

Enter a valid license policy or select a product that supports this policy.

LIC1421N

This product specified is not installed on this system.

You can not configure a license policy for a product until the product is installed.

Install the product before running this command or specify the correct product identifier. To list the products install on the system issue db2licm -l command.

LIC1422N

The number of concurrent entitlements was not updated. The return code is return-code.

Please ensure the concurrent policy is enabled for this product.

LIC1423N

This option requires the creation of an instance.

Features that are required to perform this action are only accessible once an instance has been created.

Please create an instance and issue this command again.

LIC1424N

An unexpected error occurred while accessing processor information.

The return code is return-code.

None.

LIC1426I

This product is now licensed for use as outlined in your License Agreement.
USE OF THE PRODUCT CONSTITUTES ACCEPTANCE OF THE TERMS OF THE IBM LICENSE AGREEMENT, LOCATED IN THE FOLLOWING DIRECTORY:
dir-name

LIC1427I

This product is now licensed for use as outlined in your License Agreement.
USE OF THE PRODUCT CONSTITUTES ACCEPTANCE OF THE TERMS OF THE IBM LICENSE AGREEMENT, LOCATED IN THE FOLLOWING DIRECTORY:
dir-name

LIC1428N

There was an error updating the number of licensed processors.

The number of licensed processors entered exceeds the number of maximum licensed processors allowed for this product.

Please enter number of licensed processors that does not exceed the defined maximum. If the number of processors on your system exceeds the maximum number of processors allowed for this product, please contact your IBM representative or authorized dealer.

LIC1429N

This product does not support this combination of license policies.

Please enter a valid combination of license policies. For example, you can specify "CONCURRENT REGISTERED" as a valid combination.

LIC1430N

The license could not be added because the license date is greater than operating system date.

You can perform basic license functions such as adding, removing, listing, or modifying licenses and policies by using the db2licm command.

This message is returned when a license could not be added because the date in the certificate file is later than the current operating system date.

Verify that the license start date in the certificate file precedes the current date on the operating system.

LIC1431N

This user does not have sufficient authority to perform the specified action.

This action can be run only by the root user ID or by a user ID with SYSADM authority.

Login with a user ID that has permission to run this command.

LIC1432N

The license could not be added because this product has used the maximum number of evaluation licenses: number-licenses.

This product has used the maximum number of evaluation licenses.

Run this command again with a permanent license key.

LIC1433N

The number of license entitlements was not updated.

The specified number of license entitlements is not in the valid range.

Run this command again using a valid number of license entitlements.

LIC1434N

The license was added, but the license is not active.

Activating the license failed, so the database product will run with the previous license configuration until this license is activated.

Issue the command again.

If the operation continues to fail, contact IBM software support.

LIC1435E

The license could not be added because of an I/O error.

You can perform basic license functions such as adding, removing, listing, or modifying licenses and policies by using the db2licm command.

This message is returned when an error occurs while adding a license because file and directory permissions or access settings do not allow this action.

Perform the operation again. If the problem persists, contact IBM software support.

LIC1436I

Duplicate license was found.

The license has already been registered for this installation of the database product.

No further action is necessary.

LIC1437I

License entitlements updated successfully.

LIC1438E

The license could not be removed because an I/O error occurred.

You can perform basic license functions such as adding, removing, listing, or modifying licenses and policies by using the db2licm command.

This message is returned when an error occurs while removing a license because file and directory permissions or access settings do not allow this action.

Perform the operation again. If the problem persists, contact IBM software support.

LIC1439I

DB2 server has detected that product-name is installed on this system. Products and functions obtained via this offering may only be used for testing or development purposes as outlined in your License Agreement. The License Agreement for this offering is located in the 'license' directory in the installation path for this product.

LIC1440I

License compliance report generated successfully.

LIC1441I

License compliance information was reset.

LIC1442E

An error occurred when generating compliance report.

Compliance report could not be created.

Ensure this program is able to write to the file specified and try again.

LIC1443E

An error occurred when resetting compliance information.

Compliance information could not be reset.

Ensure this program is able to write to the license directory in the installation path and try again.

LIC1444E

An I/O error occurred. The return code is. return-code .

LIC1445E

An error occurred when generating the compliance report.

An unexpected error occurred when generating the compliance report. The compliance report could not be created.
  • Ensure at least one valid database manager instance is created.
  • Ensure the DB2 global registry is not corrupted.
  • Ensure the DB2 Administration Server was started successfully.

LIC1446I

The license certificate license-certificate-file-name for SA MP was successfully installed.

The IBM Tivoli System Automation for Multiplatforms (SA MP) requires a valid license certificate to work with the DB2 High Availability (HA) feature. This license certificate was successfully installed or updated.

No response is required.

LIC1447N

The license certificate license-certificate-file-name for SA MP was not successfully installed.

The IBM Tivoli System Automation for Multiplatforms (SA MP) requires a valid license certificate to work with the DB2 High Availability (HA) feature. This license certificate was not successfully installed or updated.

If you used the database product installer to install or update this license certificate, you can find more detailed information about why the install or update failed in the database product install log file.

To manually install or update this license certificate for the SA MP Base Component, issue the command:

  • samlicm -i license-certificate-file-name

For more information about the samlicm command, see the SA MP Base Component documentation.

LIC1448I

This license was automatically applied at install time in order to enable you to start working with DB2.

To be fully licensed, this product requires a license appropriate to your purchased license policy.

A license can be downloaded from Passport Advantage or may be found on a separate CD in your product package. Both the download and the CD are titled "Activation CD".

LIC1449N

The license was not installed due to a platform restriction.

This database product is only supported in trial mode, also known as "Try and Buy" mode, on this platform.

Continue to use this product in trial mode, or install one which is fully supported on this platform.

LIC1450I

The product licensed by the certificate file-name was not found in the DB2 copy.

Additional licenses may be added to a DB2 copy prior to additional product installation. The license has been successfully added but it will not be shown until the corresponding product is installed.

No action is necessary. If you subsequently install the product covered by this certificate, you do not need to re-register the license.

LIC1451I

The number of licensed cores on this system has been updated successfully.

LIC1452N

There was an error updating the number of licensed cores. The return code is return-code.

LIC1453N

There was an error updating the number of licensed cores.

The number of licensed cores entered exceeds the number of maximum licensed cores allowed for this product.

Please enter number of licensed cores that does not exceed the defined maximum. If the number of cores on your system exceeds the maximum number of cores allowed for this product, please contact your IBM representative or authorized dealer.