Plan your Db2 pureScale Feature installation (AIX)

Planning your Db2 pureScale Feature installation consists of writing a plan with all the tasks required before, during, and after the installation of this feature.

Installing the Db2 pureScale Feature requires that you:

Write a plan with all the tasks and details.
Perform the prerequisite and preinstallation tasks that you specified in your plan.
Perform one of the installation methods that you chose in your plan.
Perform the required post-installation tasks indicated in your plan.
Perform any of the optional tasks.

Planning includes determining the high availability product that meets your needs, and the required network configuration and topology configurations to support them. The Db2 pureScale Feature provides continuous availability, disaster recovery, high availability, scalability, and consolidation considerations. Based on your particular environment, the type of workloads you handle, and disaster recovery requirements, Db2 provides continuous availability options to meet your specific needs:

Db2 pureScale Feature,
Geographically dispersed Db2 pureScale cluster (GDPC), or
High availability disaster recovery (HADR) in Db2 pureScale environments.

If you have not already read about these availability options, read topic Introduction to a Db2 pureScale environment.

After determining the HA product that meets your needs, you need to review the prerequisites and pre-installation tasks to support your HA solution. These include:

Hardware support: Network configuration includes a choice of these networks:
- RDMA protocol over InfiniBand (IB) network,
- RDMA protocol over Converged Ethernet (RoCE) network, or
- TCP/IP protocol over Ethernet (TCP/IP) network.
Configuration of adapters and switches is required for IB or RoCE networks.
Associated software
- AIX® version, technology level, and service pack level
  - Installing the Db2 pureScale Feature by using the Db2 Setup wizard requires an X Window System (X11) to display the graphical user interface (GUI).
- uDAPL is required for an IB or RoCE network
- C++ runtime level
- OpenSSH
- Db2 installer automatically installs:
  - IBM Spectrum Scale, and
  - Tivoli® SA MP.
  (RSCT is installed as part of the AIX operating system installation.)
Platform configuration:
- Hardware and firmware (including cables and switches for an IB or RoCE network)
- SSH must validate access between all hosts
- Disk space that is required for various directories
- The shared disk must have the same PVID configured on all the hosts for the tiebreaker disk and the IBM Spectrum Scale file system.
A user name and group name (complete with passwords) is required to create the Db2 pureScale instance.

The following table lists the topics that you must review to create your Db2 pureScale Feature installation plan:

Table 1.
Task	Details
Meeting the hardware, software and platform configuration prerequisites, and performing configuration preinstallation tasks	Ensure that you meet the requirements for: software prerequisites, storage hardware, and hardware and firmware (network adapters, cables, switches). Review the Installation prerequisites for DB2® pureScale Feature (AIX). For authentication and encryption, OpenSSH needs to be installed and set up. Alternatively, to install the Db2 pureScale Feature without enabling remote root login and password less SSH, you can set up db2locssh. Review Installing and setting up OpenSSH, and, review Setting up db2locssh. Shared storage devices are divided into categories that group storage devices and multipath I/O driver pairs based on fast I/O fencing and Db2 cluster services tiebreaker support. Review Shared storage support. The shared disk that is used by the Db2 pureScale instance must have the same physical volume identifier (PVID) configured on all hosts. Review Configuring PVIDs for a DB2 pureScale instance (AIX). Three user-ids are required to create the Db2 pureScale instance. Default users and group values can be used. Review Creating required users for a DB2 pureScale Feature installation. To verify your environment, review the steps in Preinstallation checklist for DB2 pureScale Feature (AIX). Check and verify that you meet the installation prerequisites. Review Checking installation prerequisites with db2prereqcheck. Advanced pre-installation tasks: IBM Spectrum Scale is the only supported file system. Before installing a Db2 pureScale environment, if your system already has IBM Spectrum Scale installed, you must verify your existing configuration. Review User-managed file system support for DB2 pureScale environments. You can choose to pass the ownership of your existing IBM Spectrum Scale file system to be managed by the Db2 pureScale environment. Review Manually allowing the DB2 installer to take over a user-managed IBM Spectrum Scale cluster. On an IB or RoCE network, configuration of communication adapter ports and switches is required. Review the appropriate sections in Configuring communication adapter ports and switches (AIX) (this includes network topology switch configuration).
Installation task	Choose one of these installation methods: Install using the DB2 Setup wizard Install using the db2_install command Install using a response file
Performing post-installation tasks	Register the license certificate file (Registering the license certificate file for a Db2 pureScale environment using the db2licm and samlicm commands) If you did not create an instance during the installation, create one (Creating a Db2 pureScale instance in installations without an instance) Add new members or CFs to your Db2 pureScale instance (Adding new members or an additional cluster caching facility) Set up Network Time Protocol (Server and Client) Set up a Network Time Protocol Server (Setting up a Network Time Protocol server by using ntpd) Configure members and CFs as Network Time Protocol clients (Configuring hosts as Network Time Protocol clients by using ntpd) For faster failover support, you can optionally enable SCSI-3 PR (Enabling SCSI-3 Persistent Reserve for Db2 pureScale shared file systems) Verifying your Db2 pureScale Feature installation and setup (Verifying your Db2 pureScale installation and setup) Consider enabling the system error log (syslog) to capture relevant messages from IBM Tivoli System Automation for Multiplatforms (SA MP) and RSCT subsystems and from the Db2 automation scripts (Enabling the system error log ).