Db2 Table Editor ISPF interface messages

These topics provide the messages and error codes that Db2 Table Editor issues for ISPF.

ETI001I
'IBM®* ROCKET** 'Licensed Materials - Property of IBM '5697-G65 'Copyright IBM Corp. 2021 All Rights Reserved. 'Copyright Rocket Software, Inc. 2001-2021 All Rights Reserved. '*Trademark of International Business Machines '**Trademark of Rocket Software, Inc. '
ETI002E
Insufficient region size. Available region size of at least 40000 is required.
ETI003E
Not enough memory. Close other applications and try again or contact your system administrator to increase the region size.
ETI005E
The command command entered in the Command or Option line is not valid for this panel. Reenter a valid command.
ETI006E
Load entry point entry name failed. RC=return code. Reason=reason code.
ETI007E
"Result set limit" - YES, impossible to use with "use scrollable cursor" - YES.
ETI008E
"Lock table" - Shared or Exclusive, impossible to use with "Close cursor mode" - YES.
ETI010E
File tailoring OPEN failed: file tailoring already in progress condition.
ETI011E
File tailoring CLOSE returned a file not open condition -- severe error.
ETI012E
Skeleton file name does not exist.
ETI013E
An error was encountered while opening skeleton file name for read: error message.
ETI014E
ISPF table name is in use by another user or the current user.
ETI015E
ISPF table input library was not allocated.
ETI016E
Opening ISPF table name failed: severe error occurred. RC=20.
ETI017E
Creating ISPF table name failed. RC=return code.
ETI018E
Closing ISPF table name failed. RC=return code.
ETI019E
Erasing ISPF table name failed. RC=return code.
ETI020E
Moving to next row in ISPF table name failed. RC=return code.
ETI021E
Deleting a row in ISPF table name failed. RC=return code.
ETI022E
Modifying a row in ISPF table name failed. RC=return code.
ETI023E
Retrieving a row from ISPF table name failed. RC=return code.
ETI024E
The line command cannot be within a block command.
ETI025E
Block line command is incomplete.
ETI101E
ISPF error: &ZERRLM
ETI102E
An invalid command was entered in the Command or Option line.
ETI103E
Enter a valid line command as listed at the top of the panel.
ETI104E
An invalid option was entered. Enter a valid option.
ETI105E
An invalid value was entered.
ETI106I
Move is pending. Enter A(After) or B(Before).
ETI107E
Element was not found.
ETI108I
No element was selected from the list.
ETI501E
Invalid memory frame size. Enter the maximum number of rows to fetch for your browse/edit session.
ETI502E
Invalid max char display. Enter a value from 1 to 32768.
ETI503E
Invalid lock table value. Valid values are SHARED, EXCLUSIVE, or NO.
ETI504E
Invalid skip locked data. Valid values are YES or NO.
ETI505E
Invalid NULL default value. Valid values are YES or NO.
ETI506E
Invalid use default values. Valid values are YES or NO.
ETI510E
Invalid display hidden columns. Valid values are YES or NO.
ETI511E
Invalid show column labels. Valid values are YES or NO.
ETI513E
Invalid save options. Valid values are YES or NO.
ETI514E
Invalid column headers. Valid values are YES or NO.
ETI515E
Invalid allocation. Valid values are AUTOMATIC or MANUAL.
ETI516E
Connection program load modules (DSNALI, DSNHLI2, DSNWLI2, DSNTIAR) were not found in specified load libraries for DB2® subsystem.
ETI517E
Invalid data set name for Display MEPL Utility JCL: data set name.
ETI518E
Invalid member name for Display MEPL Utility JCL: member name.
ETI519E
Data set name for Display MEPL Utility JCL is required. Enter a valid data set name.
ETI520E
Member name for Display MEPL Utility JCL is required. Enter a valid member name.
ETI521E
Member name is allowed only for partitioned data set.
ETI522I
Display MEPL JCL was built successfully.
ETI523E
An error occurred while building MEPL JCL file: error message.
ETI524E
Invalid space units. Valid values are TRKS or CYLS.
ETI525E
Invalid primary quantity. Specify a numeric value.
ETI526E
Invalid secondary quantity. Specify a numeric value.
ETI527E
Invalid block size. Specify a numeric value.
ETI528E
Specified device type could not be found in MVS. Enter another device type.
ETI529E
Invalid record format. Valid values are F, V, U, M, A, S, B, D, FB, VB, FBS, or VBS.
ETI530E
Invalid record length. Specify a numeric value.
ETI531E
Control file name does not exist.
ETI532E
The name data set could not be found in the MVS catalog.
ETI533E
DB2 subsystem ID is required. Enter a valid DB2 SSID.
ETI534E
DB2 subsystem ID is invalid. Enter a valid DB2 SSID.
ETI535E
DB2 subsystem ID already exists. Enter another DB2 SSID to create.
ETI536E
Plan name is required. Enter a valid DB2 plan.
ETI537E
Plan name is invalid. Enter a valid DB2 plan.
ETI538I
No entries match the entered like criteria.
ETI542E
DB2 Loadlib is a required field. Enter the full DSN of the DB2 load library data set.
ETI543E
DB2 Release number is not supported by this version of the product.
ETI544I
No DB2 subsystem was defined in the DB2 control file.
ETI545I
Operation completed successfully.
ETI546I
DB2 subsystem SSID was successfully selected.
ETI547E
Failed to obtain DB2 version.
ETI548E
Row count compare sign you specified in the search criteria is invalid. Valid values are EQ, NE, GT, LT, or blank.
ETI549E
Row count value in search criteria is invalid. Value must be numeric or blank.
ETI550E
Action value in search criteria is invalid. Valid values are U, D, I, E, B, or blank.
ETI551E
Select position value is invalid. Valid value must be numeric or blank.
ETI552E
Order by value is invalid. Valid value must be numeric or blank. Enter a valid number to sort the column.
ETI553E
Column type size value is invalid. Valid values are LONG or SHORT.
ETI554E
Where clause compound value is invalid. Valid values are AND or OR.
ETI555E
Column type size value is invalid. Valid values are LONG or SHORT.
ETI556E
Omit business time columns value is invalid. Valid values are YES or NO.
ETI557E
You must choose at least one column to proceed.
ETI558I
Table profile was saved successfully.
ETI559I
Table profile was loaded successfully.
ETI560I
Statement was saved to table profile successfully.
ETI561I
Saved statement was found in table profile.
ETI562I
Statement was loaded from table profile successfully.
ETI563I
Statement was reset to Select Columns panel settings successfully.
ETI565E
Invalid NULL value. Valid values are YES or NO.
ETI566W
BROWSE substituted because the result set for the SQL request is read only.
ETI567E
Export file name is empty.
ETI568E
An error occurred while opening file for export: error message.
ETI569E
An error occurred while writing data to file for export: error message.
ETI570I
Data has been successfully exported to file name.
ETI571W
Inserted row cannot be hidden.
ETI572I
No changes were made since last COMMIT.
ETI573E
It is not possible to perform a lock operation on a system table.
ETI574E
It is not possible to perform a lock operation because the result set for the SQL request is read only.
ETI575E
It is not possible to perform a lock operation on a temporary table, view, or alias.
ETI576E
The insert command is disabled. You have chosen to exclude at least one column of data that is necessary to allow insert.
ETI577I
Logging is not in effect.
ETI578I
No rows to display.
ETI579I
History is not available.
ETI580E
Cursor must be in a valid cell for the command name command.
ETI581E
No columns required for versioning found in the table.
ETI582I
The beginning of the data has been reached.
ETI583I
The end of the data has been reached.
ETI584I
Reset successful. Hidden rows displayed.
ETI585I
Hide command successful; count rows not displayed.
ETI586W
BROWSE substituted because a table with the maximum number of columns was specified.
ETI588I
Caps is on.
ETI589I
Caps is off.
ETI590E
File name for Log export is required. Enter a valid file name.
ETI596I
Close cursor mode in User settings was set to NO, because Lock table is set to mode.
ETI591E
Invalid use scrollable cursor. Valid values: YES or NO.
ETI592E
Invalid close cursor mode. Valid values: YES or NO.
ETI593E
Invalid result set value. Enter the maximum number of rows to fetch for your browse/edit session.
ETI594E
Scrollable cursor cannot be used with result set limit.
ETI595E
Invalid result set limit. Valid values: YES or NO.
ETI597I
Some data in this table contains non-displayable characters.
ETI598I
The changes that you made were not saved.
ETI599E
Invalid decimal value. The scale cannot be greater than the precision. The current value has too many digits after the decimal point.
ETI600E
The selected accelerator is not started.
ETI601E
Too many accelerators selected. You can select only one Accelerator.
ETI602E
Accelerator is not associated with this Db2 subsystem.
ETI603E
There is no such table on the selected accelerator.
ETI604E
Accelerators are not associated with this DB2 subsystem.
ETI605E
On the started accelerators selected table not found.
ETI606E
Please define a value for at least one column.
ETI607E
Invalid Reset confirmation command. Valid values: YES or NO.
ETI609I
Reset confirmation prompts was done.
ETI611W
BROWSE substituted because not all accelerators for this AOT are started.
ETI612W
BROWSE substituted because DB2 can't update AOT through location.
ETI620E
Error opening import dataset - Import dataset name.
ETI621E
Types error – type column from import dataset does not match type column from table.
ETI622I
File ended.
ETI623W
Continue used before import.
ETI624E
"Delimiter" option on User Settings panel is empty.
ETI625E
"Import data set name" option on User Settings panel is empty.
ETI626E
"Type" from import dataset is not supported type by Db2.
ETI627E
Column headers not found in Import dataset name.
ETI628E
Invalid max import rows. Enter number of lines to be processed in one import iteration.
ETI629E
IMPORT dataset is empty.
ETI700E
An error occurred while opening the Db2® load libraries: RC = return code.
ETI701E
An error occurred while attaching the DB2 attachment facility subtask: RC = return code.
ETI703S
The Db2 attachment facility subtask ended unexpectedly: RC = return code.
ETI704E
The specified user ID and password are invalid.
ETI705E
The specified password for user ID has expired.
ETI706E
Access for the specified user ID has been revoked.
ETI707E
An error occurred while performing authentication: SAF RC = return code, RC = return code, RSN = reason code.
ETI708E
An invalid dynamic allocation parameter was specified: code = code.
ETI709E
A dynamic allocation error occurred: info code = code, error code = code.
ETI710E
Dynamic allocation query error occurred: info code = code, error code = code.
ETI711E
Dynamic free error occurred: info code = code, error code = code.
ETI712E
Dynamic concatenation error occurred: info code = code, error code = code.
ETI713E
SQL error occurred: SQL code = code, SQL state = code.
ETI714E
SQL error occurred: error code=code.
ETI715S
Db2 attachment facility error occurred: function = code, RC = code, reason = code.
ETI716E
Input Db2 command is too long.
ETI717E
Error occurred while making an IFI call.
ETI802E
An invalid return code of return code reason code reason code was encountered on function function. The error message text follows: messages
ETI810E
Invalid CNUM parameter. Valid values are ON, OFF, and blank.
ETI811E
Invalid COLS parameter. Valid values are ON, OFF, and blank.
ETI812I
The FIND command requires a match string.
ETI813E
The RFIND key can only be used after a FIND character string is entered.
ETI814E
An unknown column column was specified.
ETI815E
SORT is not supported for the specified column.
ETI816E
Max Sort Columns exceeded. Sorting first 9 columns.
ETI817E
Invalid column selection. Set cursor to valid column.
ETI818E
Invalid command parameters.
ETI819E
Invalid location for moved column. The source column cannot be moved to the new position.
ETI820E
Not enough space for scrolling unfixed columns.
ETI821E
Operation not valid for specified column.
ETI822E
Fixed columns cannot be hidden.
ETI823E
Invalid value entered for column size: non-numeric data.
ETI824E
Invalid value entered for column size: out of range.
ETI825E
SIZE is not supported for the specified column.
ETI870E
TBCREATE failed. RC=return code.
ETI871E
TBOPEN failed. RC=return code.
ETI872E
TBCLOSE failed. RC=return code.
ETI873E
TBDELETE failed. RC=return code.
ETI874E
TBMOD failed. RC=return code.
ETI875E
TBGET failed. RC=return code.
ETI876E
View Table is in use.
ETI877E
View Library not allocated.
ETI878E
TBTOP failed. RC=return code.
ETI879E
TBSKIP failed. RC=return code.
ETI940E
Invalid selection character. Valid values are "F" and "U".
ETI941E
Column move failed - invalid location.
ETI942E
Invalid column size. Column size must be numeric.
ETI943E
Invalid column size. The specified value is out of range.
ETI944E
Total fixed column sizes cannot exceed screen size.
ETI945E
Configuration request failed - at least one unfixed column would not be displayed.
ETI946E
Configuration request failed - the unfixed area would be too small to display this column.
ETI947E
Configuration request failed - not all columns can be displayed.
ETI948E
Invalid FIXed selections. Operation would not leave enough space for this column.
ETI949E
Duplicate Cmd values entered.
ETI950E
Invalid sort number. Enter a valid numeric digit.
ETI951E
Duplicate sort sequence number.
ETI952E
Sort sequence skips a number.
ETI953E
Invalid Dir entered. Direction must be A (ascending) or D (descending).
ETI954E
Dir not valid without Ord.
ETI955E
Fixed columns cannot exceed screen size.
ETI956E
Invalid entry. Cmd values must be numeric.
ETI957E
Invalid entry for permanent column.
ETI958E
Invalid entry for fixed column.
ETI959E
Invalid entry for unfixed column.
ETI960E
Invalid Column Function value. Valid values: 1, 2, 3, and 4.
ETI961E
Invalid Permanent View value. Valid values: Y, N.
ETI962E
Invalid Reset View value. Valid values are Y, N.
ETI963E
Invalid Stop Sorting value. Valid values: Y, N.
ETI964E
Invalid data set name.
ETI965E
Invalid member name.
ETI966E
Unable to allocate the report file.
ETI967E
Unable to open the report file.
ETI968E
Invalid selection character. Valid values: "H" and "U".
ETI970E
TBCREATE failed. RC=return code.
ETI971E
TBOPEN failed. RC=return code.
ETI972E
TBCLOSE failed. RC=return code.
ETI973E
TBDELETE failed. RC=return code.
ETI974E
TBMOD failed. RC=return code.
ETI975E
TBGET failed. RC=return code.
ETI976E
View Table is in use.
ETI977E
View Library not allocated.

Parent topic: Messages