RAID array commands

RAID array mode provides the commands to modify the RAID volume.

To enter the mode, use the global raid-volume command.

While in this mode, use the commands in the following table to define the RAID volume.

To view the current configuration, use the show command.
To restore default values, use the reset command.
To exit this configuration mode without saving changes to the running configuration, use the cancel command.
To exit this configuration mode and save changes to the running configuration, use the exit command.

Table 1. RAID array commands
Command	Purpose
admin-state	This command sets the administrative state for the configuration.
directory	This command specifies the name of the directory on the RAID array.
read-only	This command indicates whether access to the RAID volume is read-only or read/write.