IWNG
Graphical user interface (GUI) messages (IWNG) are provided for reference.
IWNG0000I
Successfully authenticated user.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG0001E
Invalid username or password.
Explanation
The username or password specified is invalid.
User Response
Try logging in again with the correct username and password. If problems persist contact the system administrator.
IWNG0002I
Successfully logged out.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG0003E
Unable to connect to server. Reattempt the task at a later time.
Explanation
The user interface was unable to connect to the server.
User Response
Wait a few minutes and try again. If problems persist contact the system administrator.
IWNG2000I
Successfully connected to VALUE_1.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG2001E
Unable to resolve hostname VALUE_1.
Explanation
The hostname could not be found on the local network.
User Response
Ensure the server is connected to the network and can reach the specified host.
IWNG2002E
Unable to authenticate to VALUE_1.
Explanation
The certificate used to authenticate the user interface server to the function code server is invalid.
User Response
Replace the user interface certificate with the correct certificate.
IWNG2003E
Unable to connect to VALUE_1.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG2004E
Unable to connect to client. Try again in a minute.
Explanation
The user interface was unable to connect to the client.
User Response
Wait a few minutes and try again. If problems persist contact the system administrator.
IWNG2005E
Unable to connect to the server using the configured certificate.
Explanation
The user interface is unable to load a valid certificate for connection to the server.
User Response
Check that the certificate trust store specified in the csmConnections.properties file exists and can be accessed by the user interface server.
IWNG3000I
The query on session VALUE_1 was successful.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG3001E
The session specified VALUE_1 could not be found.
Explanation
The session could not be found. It might have been deleted.
User Response
Check to see that the session has been deleted. If the problem persists contact your system administrator.
IWNG3002E
The task specified could not be found.
Explanation
The task id used to track progress of queries and commands to the server could no longer be found.
User Response
Check the Console messages to see if the task completed. If a result message is not present, resubmit the command.
IWNG3003E
The storage device specified could not be found.
Explanation
The storage device specified in a particular query has been removed from the configuration.
User Response
None.
IWNG3004E
The hardware connection VALUE_1 could not be found.
Explanation
The hardware connection specified in a particular query was removed from the configuration.
User Response
None.
IWNG3005E
No session types are currently available. Check to see whether the proper license files have been installed.
Explanation
No session types are currently available.
User Response
Check to see whether the proper license files have been installed.
IWNG3500I
Successfully matched copy set.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG3501E
The specified devices to match are incompatible.
Explanation
The source and target devices are not a supported configuration for the current session type.
User Response
Choose source and target devices which are supported for the current session type.
IWNG3502W
Your selections did not result in any changes to volume protection.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG4000I
The query for path information completed successfully.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG4001E
Hardware reported code VALUE_1 on path VALUE_2.
Explanation
An error was found on the path specified.
- 2 (0x2)
- Initialization failed. ESCON link reject threshold exceeded when attempting to send ELP or RID frames.
- 3 (0x3)
- Time out. No reason available.
- 4 (0x4)
- No resources available at primary for the logical path establishment.
- 5 (0x5)
- No resources available at secondary for the logical path establishment.
- 6 (0x6)
- Secondary CU Box Name or LSS number mismatch.
- 7 (0x7)
- Secondary CU SSID mismatch or failure of the I/O that collects secondary information for validation.
- 8 (0x8)
- ESCON link is offline. This is caused the lack of light detection coming from a host, peer or switch.
- 9 (0x9)
- Establish failed but will retry when conditions change.
- 10 (0xa)
- The primary control unit port or link cannot be converted to channel mode since a logical path is already established on the port or link. The establish paths operation will not be retried within the control unit automatically.
- 20 (0x14)
- Fibre channel Path link down.
- 21 (0x15)
- Fibre channel Path retry exceeded.
- 22 (0x16)
- Fibre channel Path secondary adapter not PPRC capable. 1. Secondary adapter not configured properly or not correct microcode 2. Secondary adapter already a target of 32 different ESS boxes.
- 23 (0x17)
- Fibre channel Path Secondary Adapter not available.
- 24 (0x18)
- Fibre channel Path primary login exceeded.
- 25 (0x19)
- Fibre channel Path secondary login exceeded.
- 26 (0x1a)
- Fibre channel Path primary adapter not PPRC capable. Primary adapter not configured properly or not correct microcode.
- 27 (0x1b)
- Fibre channel Path Established but degraded due to High Failure Rate.
- 28 (0x1c)
- Fibre channel Removed with high failure rate.
IWNG4002E
Unable to retrieve the WWNN of the target device VALUE_1.
Explanation
The WWNN for the target device could not be determined.
User Response
Ensure that the target storage device has been added to the configuration and try again. If the problem persists, attempt to remove the path through the native hardware console
IWNG4003I
Successfully completed the command VALUE_1 for the path VALUE_2.
Explanation
The command was completed successfully.
User Response
None.
IWNG4004E
The command VALUE_1 failed for the path VALUE_2.
Explanation
The command completed with one or more errors.
IWNG4005W
Your selections did not result in any changes to paths.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG4010I
Successfully completed the set location command for the session VALUE_1.
Explanation
The command was completed successfully.
IWNG4011E
Failed to complete the set location command for the session VALUE_1. Check the individual messages for details.
Explanation
The command completed with an error.
IWNG4012I
The storage systems were added successfully.
Explanation
The command was completed successfully.
IWNG4013E
Errors were encountered while adding the storage systems. Check the individual messages for details.
Explanation
The command completed with an error.
IWNG4014W
Errors were encountered while adding the storage systems. Check the individual messages for details.
Explanation
The command completed with one or more errors.
IWNG5000E
Unable to process user request, no information provided.
Explanation
Not enough information was specified in the request.
User Response
Resubmit the request with appropriate information.
IWNG5001E
Page request not specified.
Explanation
No page was specified in the request.
User Response
Resubmit the request with the page specified.
IWNG5002E
The device name was not specified.
Explanation
The request requires a device name to complete successfully.
User Response
Resubmit the request with the device name specified.
IWNG5003E
The session name was not specified.
Explanation
The request requires the name of a session to complete successfully.
User Response
Resubmit the request with the session name specified.
IWNG5004E
The role pair name was not specified.
Explanation
The request requires the name of the role pair to complete successfully.
User Response
Resubmit the request with the session name specified.
IWNG5005E
Unable to query the status of the task due to a missing task name.
Explanation
The task id was not specified in the query.
User Response
Resubmit the request with the task id specified.
IWNG5006E
The page request that was issued was not recognized: VALUE_1.
Explanation
The page requested was not a recognized page.
User Response
Resubmit the request with a valid page.
IWNG5007E
The wizard name was not specified.
Explanation
The request requires the name of the wizard to complete successfully.
User Response
Resubmit the request with a valid wizard name.
IWNG5008E
The wizard name is not recognized: VALUE_1.
Explanation
The request requires the name of the wizard to complete successfully.
User Response
Resubmit the request with a valid wizard name.
IWNG5009E
The wizard page name was not specified.
Explanation
The request requires the name of the wizard to complete successfully.
User Response
Resubmit the request with a valid wizard name.
IWNG5010E
The wizard page name is not recognized: VALUE_1.
Explanation
The request requires the name of the wizard to complete successfully.
User Response
Resubmit the request with a valid wizard name.
IWNG5011E
The command could not be processed; no command name specified.
Explanation
The request requires a command name to complete successfully.
User Response
Resubmit the request with a command name.
IWNG5012E
The command did not specify a session name: VALUE_1.
User Response
Resubmit the command with a valid session name.
IWNG5013E
The command did not specify a device name: VALUE_1.
Explanation
None.
User Response
Resubmit the command with a valid device.
IWNG5014E
The command to add an ESS did not contain enough information.
User Response
Resubmit the command with valid information.
IWNG5015E
The command to add a storage controller did not contain enough information.
User Response
Resubmit the command with valid information.
IWNG5016E
The command to modify an ESS did not contain enough information.
User Response
Resubmit the command with valid information.
IWNG5017E
The command to modify a storage controller did not contain enough information.
User Response
Resubmit the command with valid information.
IWNG5018E
Unrecognized command: VALUE_1.
Explanation
The command submitted was not recognized.
User Response
Resubmit a valid command.
IWNG5019E
The command did not specify a session type: VALUE_1.
Explanation
You need to specify a session type.
User Response
Contact IBM support.
IWNG5020E
The command did not specify a list of copy sets: VALUE_1.
Explanation
You need to specify a list of copy sets.
User Response
Contact IBM Support.
IWNG5021E
The volume name was not specified.
Explanation
You need to specify a volume.
User Response
Contact IBM Support.
IWNG5022E
The argument specifying whether to force removal of the copy set was blank.
User Response
Contact IBM Support.
IWNG5023E
The filter was not specified.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG5024E
The device type VALUE_1 is not a valid device type.
Explanation
None.
User Response
None.
IWNG5025E
Invalid parameter. The source storage system was not identified in the query.
User Response
Resubmit command with the source storage system specified.
IWNG5026E
Invalid parameter. The target storage system was not identified in the query.
User Response
Resubmit command with the target storage system specified.
IWNG5027E
Null servelet response generated.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG5028E
Inadequate information provided for source or target logical subsystem.
User Response
Resubmit command with all necessary information for source and target logical subsystem.
IWNG5029E
The command issued did not contain adequate parameters.
User Response
Resubmit the command with all the necessary parameters.
IWNG5030E
The maximum parameter must be a positive whole number.
User Response
Correct the maximum parameter.
IWNG5031E
Invalid LSS specified.
Explanation
None
User Response
Correct the LSS parameter and retry the operation.
IWNG6000E
There was an error while querying for user information.
User Response
Resubmit the command with all the necessary parameters.
IWNG6001I
The query for user information returned successfully.
User Response
None required.
IWNG6002E
No users or groups were found.
User Response
Resubmit the command with all the necessary parameters.
IWNG6003E
There was an error while querying for the access control list.
User Response
Resubmit the command with all the necessary parameters.
IWNG6004E
One or more errors occurred while adding access.
User Response
Resubmit the command with all the necessary parameters.
IWNG6005W
One or more warnings occurred while adding access.
User Response
Resubmit the command with all the necessary parameters.
IWNG6006I
All users were added successfully.
User Response
None required.
IWNG6007E
The user name was not specified.
User Response
Resubmit the command with all the necessary parameters.
IWNG6008E
The group was not specified.
User Response
Resubmit the command with all the necessary parameters.
IWNG6009E
The session table key was not specified.
User Response
Resubmit the command with all the necessary parameters.
IWNG6010E
The user table key was not specified.
User Response
Resubmit the command with all the necessary parameters.
IWNG6011E
The access level was not specified.
User Response
Resubmit the command with all the necessary parameters.
IWNG6012E
The current user does not have the necessary authority to view the access control list.
User Response
Ensure that your user ID has adequate permissions.
IWNG6013W
Using this option allows the FlashCopy target volume to be a Metro Mirror or Global Mirror primary volume. This can lead to data loss on both the primary and secondary volumes of the remote copy pair. Are you sure you want to use this option?
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG6014E
The specified table no longer exists.
Explanation
The table no longer exists. Views which are idle for extended periods of time can be removed.
User Response
Refresh the current page and retry the action.
IWNG6015E
Invalid parameter specified. Value must be an integer.
Explanation
A value was input that was not an integer.
User Response
Correct the request and retry it.
IWNG6016E
The password was not specified.
Explanation
None
User Response
Resubmit the command with all the necessary parameters.
IWNG6017E
The access level specified was not recognized.
Explanation
None
User Response
Resubmit the command with a valid access level.
IWNG6020E
An internal error occurred while issuing an export copy set command for session VALUE_0.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG6021E
An IOException occurred while issuing an export copy set command for session VALUE_0.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG6022E
The specified file is too large. The file cannot exceed VALUE_1 MB.
Explanation
The specified file exceeded the maximum size for csv import.
User Response
Verify the correct file was specified. If the correct file was specified, split the file into multiple smaller files.
IWNG6023E
The specified host type of VALUE_1 is invalid.
Explanation
The specified host type is not valid.
User Response
Use a supported host type.
IWNG6024I
Query for connected Host Connections was successful.
Explanation
None
User Response
None
IWNG6025I
Configuration for LDAP Server was successful.
Explanation
None.
User Response
None.
IWNG6026E
There was an error while configuring the LDAP server.
Explanation
The LDAP configuration is not valid.
User Response
Reconfigure the server with all the necessary parameters.
IWNG6028E
There was an error while configuring the Alert settings.
Explanation
The configuration is not valid.
User Response
Reconfigure the settings with all the necessary parameters.
IWNG6029E
There was an error while getting the DS8000 Port Pairing CSV file.
Explanation
Failed to get 8000 Port Pairing CSV file.
User Response
Reconfigure the server with all the necessary parameters.
IWNG6030E
There was an error while getting the server properties file.
Explanation
Failed to get the server properties file.
User Response
The server properties file can be modified from the operating system or via the CLI.
IWNG7000I
This consistency group name is invalid.
Explanation
None
User Response
None
IWNG7001I
This consistency group name must be an integer of base {base}, between {min} and {max}.
Explanation
None
User Response
None
IWNG7002I
This consistency group name must be a hexadecimal value between {min} and {max}.
Explanation
None
User Response
None
IWNG7003I
This consistency group name must match the following regular expression: {pattern}.
Explanation
None
User Response
None
IWNG7004I
This consistency group name must contain between {min} and {max} characters, inclusive.
Explanation
None
User Response
None
IWNG7005I
This consistency group name must only contain alphanumeric characters.
Explanation
None
User Response
None
IWNG9994E
Received error VALUE_1 when communicating with the server. A manual page reload may correct the error. If problems persist, check to see that the server is running.
User Response
Perform a manual reload of the page. If the page cannot be reloaded, ensure that the server is running.
IWNG9995E
A network connection error has occurred.
User Response
If the problem persists, contact your system administrator.
IWNG9996E
An unknown server error has occurred.
User Response
If the problem persists, contact your system administrator.
IWNG9997E
The server returned invalid data.
Explanation
No additional information is available for this message.
User Response
Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.
IWNG9998E
An internal error has occurred.
Explanation
An error occurred while processing this request.
User Response
If the problem persists, contact your system administrator.
IWNG9999E
An unknown error has occurred.
Explanation
An error occurred while processing the request.
User Response
If the problem persists, contact your system administrator.