IWNC

Command line interface (CLI) messages (IWNC) are provided for reference.

  

IWNC0000E

{0} An unknown error was encountered; check the system log for additional information.

Explanation

None.

User Response

None.

  

IWNC0001E

{0} The specified command is not implemented.

Explanation

The specified command is not implemented.

User Response

Select a different command.

  

IWNC0003E

{0} The command failed; message text for MESSAGE_ID was not found.

Explanation

The message text for the message returned could not be located.

User Response

None.

  

IWNC0004E

{0} The command did not complete. The probable cause is synchronization. Try again in a few minutes.

Explanation

None.

User Response

None.

  

IWNC0005E

{0} An unknown or invalid message was returned.

Explanation

None

User Response

None

  

IWNC0006E

{0} The command failed with the following unexpected exception: EXCEPTION_INFO

Explanation

None

User Response

None

  

IWNC0007W

{0} The following parameter was ignored: CLI_PARAMETER. Command execution will continue.

Explanation

The parameter CLI_PARAMETER was not needed and was ignored.

User Response

No action required.

  

IWNC0010E

{0} Invalid port specified: PORT_NUMBER. Port must be an integer from 1 to 65535.

Explanation

The TCP/IP port provided must be between 1 and 65535.

User Response

Specify a port value that is within the valid range.

  

IWNC0011E

{0} A required parameter is missing: CLI_PARAMETER.

Explanation

The command requires the specified parameter. See the CLI help or documentation for command parameter details.

User Response

Resubmit the command with the required parameter.

  

IWNC0012E

{0} Invalid CONNECTION_TYPE provided. Acceptable values include "zos". Value entered was PARAMETER_VALUE.

Explanation

The value for the CONNECTION_TYPE parameter was not valid.

User Response

Resubmit the command with an acceptable CONNECTION_TYPE value.

  

IWNC0013E

{0} No results were returned.

Explanation

The command was submitted but no results were returned.

User Response

Check logs for additional information.

  

IWNC0014E

{0} The type and serial field has INTEGER tokens. This field should have INTEGER tokens.

Explanation

The identifier did not match the required format.

User Response

Resubmit the command with the correct identifier format.

  

IWNC0015E

{0} The device DEVICE_ID was not found.

Explanation

There was no device matching the identifier.

User Response

Check to see if the device identifier is correct and the device is connected to the system.

  

IWNC0016W

{0} No devices matched the input criteria.

Explanation

There is no device matching the query specified.

User Response

Check the input criteria and resubmit the command.

  

IWNC0017W

{0} No hardware manager was found for specified device type.

Explanation

The device type specified is not supported and cannot be managed by this system.

User Response

Ensure that the correct device type was specified.

  

IWNC0018W

{0} No HA servers were found.

Explanation

There are no High Availability (HA) servers configured.

User Response

Configure an HA server.

  

IWNC0019E

{0} The snapshot group GROUP_NAME is not valid.

Explanation

The snapshot group specified was not valid.

User Response

Resubmit the command with a valid snapshot group.

  

IWNC0020W

{0} No device information was found.

Explanation

There was no information for the device specified.

User Response

Ensure that the device was correctly specified in the command and that the device exists.

  

IWNC0021E

{0} A null password is not allowed.

Explanation

A blank password was entered.

User Response

Resubmit the command and ensure that the password is not null.

  

IWNC0022E

{0} The cmd_name command has been canceled due to user refusal.

Explanation

None.

User Response

None.

  

IWNC0023E

{0} The path path does not exist.

Explanation

The path provided does not exist or cannot be reached on this system.

User Response

Resubmit the command with a path that exists and is reachable.

  

IWNC0024E

{0} Permission to path denied.

Explanation

The CLI does not have permission to write to the path.

User Response

Resubmit the command with a path that the CLI has write permission.

  

IWNC0025E

{0} The path path is not a directory.

Explanation

The path exists but is not a directory.

User Response

Resubmit the command with a path that is a directory.

  

IWNC0026I

{0} The file was placed at the location: {1} path .

Explanation

The file has been placed in the directory.

User Response

No user action required.

  

IWNC0051E

{0} The device identifier contains ID_PART which is not a valid device designator.

Explanation

The device type portion of the device identifier contains an invalid type.

User Response

Resubmit the command with a correct identifier.

  

IWNC0052E

{0} The device designator field has INTEGER tokens, it should have INTEGER.

Explanation

The device identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0053E

{0} The device identifier contains ID_PART which is not a valid machine type designator.

Explanation

The device identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0055E

{0} The device identifier contains ID_PART which is not a valid device lss designator.

Explanation

The device identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0060E

{0} The device type ID_PART and the machine type ID_PART do not match. The device type and the machine type must match.

Explanation

The device identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0111E

{0} Session name SESSION_NAME is invalid: Its length must be greater than 0 and less than INTEGER characters, and only contain the characters a-z, A-Z, 0-9, space, dash (-), period (.), underscore (_), or comma (,).

Explanation

The session name must be within acceptable parameters as outlined in the message text.

User Response

Choose a different session name and resubmit the command.

  

IWNC0121E

{0}timestamp The volume or volume group identifier is invalid; it has {1}INTEGER tokens. It should have {2}INTEGER.

Explanation

The volume identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0123E

{0} The volume identifier contains ID_PART which is not a valid machine model designator.

Explanation

The volume identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0124E

{0} The serial number identifier ID_PART is invalid. It should contain only digits (0..9) and hexadecimal characters (a..f).

Explanation

The volume identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0125E

{0} The volume identifier contains ID_PART which is not a valid volume type designator.

Explanation

The volume identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0127E

{0}timestamp The volume or volume group identifier contains {1}ID_PART which is not a valid machine type designator.

Explanation

The volume identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0129E

{0} The volume identifier ID_PART is invalid. It should contain only digits (0..9) and hexadecimal characters (a..f).

Explanation

The volume identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0130E

{0}timestamp The volume group identifier contains {1}ID_PART which is not a valid volume group designator.

Explanation

The volume identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0131E

{0}timestamp The volume group identifier contains {1}ID_PART which is not a supported device type designator for this session.

Explanation

The volume identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0141E

{0} The device identifier ID_PART is not a valid machine type designator.

Explanation

The volume identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0161E

{0} The port identifier PORT_ID is invalid. It should contain only digits (0..9) and hexadecimal characters (a..f). Multiple ports are separated by a semicolon (;).

Explanation

The port identifier format was incorrect.

User Response

Resubmit the command with correct port identifier syntax.

  

IWNC0162E

{0} The port value PORT is out of range. It should be greater than or equal to 0 and less than or equal to 65535.

Explanation

The port value is out of acceptable range.

User Response

Resubmit the command with a port that is with in the acceptable range.

  

IWNC0171E

{0} The path identifier PATH_ID is invalid; it has INTEGER tokens. It should have INTEGER.

Explanation

The path identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0172E

{0} The machine type and serial field ID_PART is not valid.

Explanation

The machine type or serial identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0173E

{0} The port field ID_PART is not valid. It should contain only digits (0..9) and hexadecimal characters (a..f).

Explanation

The port field was incorrect.

User Response

Resubmit the command with a correct port.

  

IWNC0174E

{0} The machine type identifier ID_PART is invalid. It should contain only digits (0..9).

Explanation

The machine type identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0175E

{0} The LSS identifier ID_PART is invalid. It should contain only digits (0..9) and hexadecimal characters (a..f).

Explanation

The LSS identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0176E

{0} The LSS and port identifier ID_PART is invalid. It should contain only digits (0..9) and hexadecimal characters (a..f).

Explanation

The path identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0177E

{0} The value {1}VALUE_1 is not a valid integer.

Explanation

The value is not a valid integer.

User Response

Resubmit the command with a valid integer.

  

IWNC0178E

{0} The value {1}VALUE_1 is out of range.

Explanation

The value is out of range.

User Response

Resubmit the command with a positive integer.

  

IWNC0181E

{0} The IP address field has INTEGER tokens, it should have INTEGER.

Explanation

The IP address format was incorrect.

User Response

Resubmit the command with a valid IP address.

  

IWNC0182E

{0} The IP address octet IP_ADDRESS_PART is invalid. It should contain only digits (0..9).

Explanation

The IP address format was incorrect.

User Response

Resubmit the command with a valid IP address.

  

IWNC0183E

{0} The IP address octet IP_ADDRESS_PART is invalid. It should be between 0 and 255 inclusive.

Explanation

The IP address format was incorrect.

User Response

Resubmit the command with a valid IP address.

  

IWNC0191E

{0} The device identifier is invalid; it has INTEGER tokens. It should have INTEGER.

Explanation

The device identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0192E

{0} The device identifier contains ID_PART which is not a valid device designator.

Explanation

The device identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0194E

{0} The device identifier contains ID_PART which is not a valid device type designator.

Explanation

The device identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0196E

{0} The IP address octet IP_ADDRESS_PART is not valid. It should be between 0 and 255 inclusive.

Explanation

The IP address format was incorrect.

User Response

Resubmit the command with a valid IP address.

  

IWNC0197E

{0} The device identifier contains ID_PART which is not a valid machine type designator.

Explanation

The device identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0198E

{0} The device identifier is invalid; it has INTEGER tokens. It should have INTEGER or INTEGER.

Explanation

The device identifier format was incorrect.

User Response

Resubmit the command with a correct identifier.

  

IWNC0199E

{0} The port identifier PORT_ID is out of range. Its value should be between 0x0 and PORT_ID_VALUE.

Explanation

The port identifier format was incorrect.

User Response

Resubmit the command with correct port identifier syntax.

  

IWNC0200E

{0} Location name LOCATION_NAME is invalid: Its length must be greater than 0 and less than 32 characters, and only contain the characters a-z, A-Z, 0-9, space, dash (-), period (.), underscore (_), or comma (,).

Explanation

The location name must be within acceptable formatting parameters as specified in the message text.

User Response

Resubmit the command with a location name that meets the requirements.

  

IWNC0210E

{0} The command does not support the specified device type.

Explanation

The device that you have specified is not supported by the command.

User Response

Ensure that the correct device is specified.

  

IWNC0301E

{0} IP address is specified incorrectly; expected exactly two IP addresses.

Explanation

This command requires that two IP addresses be specified.

User Response

Resubmit the command with two valid IP addresses.

  

IWNC0302E

{0} The port information is specified incorrectly; expected exactly two ports.

Explanation

This command requires that two ports be specified.

User Response

Resubmit the command specifying two ports.

  

IWNC0305E

{0} User name details are specified incorrectly; expected one or two user names.

Explanation

This command requires that either one or two user names be specified.

User Response

Resubmit the command with the correct number of user names.

  

IWNC0306E

{0} The password information is specified incorrectly; expected one or two passwords.

Explanation

This command requires that either one or two passwords be specified.

User Response

Resubmit the command with the correct number of passwords.

  

IWNC1003E

{0} Too many IP addresses were specified. A maximum of one IP address should be specified. Input was USER_INPUT.

Explanation

This command requires that only one IP address.

User Response

Resubmit the command with one IP address.

  

IWNC1006E

{0} Too many user names were specified; only one should be specified.

Explanation

This command requires that only one user name be specified.

User Response

Resubmit the command with one user name.

  

IWNC1007E

{0} Too many ports specified; only one should be specified.

Explanation

This command requires that only one port be specified.

User Response

Resubmit the command with one port.

  

IWNC1107E

{0} No user specified.

Explanation

This command requires that a user be specified.

User Response

Resubmit the command with a user.

  

IWNC1202E

{0} Session SESSION_NAME specified with invalid parameters: PARAMETERS.

Explanation

Invalid parameters were specified as part of this command.

User Response

Correct the host name and run the command again.

  

IWNC1203E

{0} The PARAMETER_NAME parameter requires the PARAMETER_NAME parameter to be set.

Explanation

Using the PARAMETER_NAME parameter for this command requires that the PARAMETER_NAME parameter also be used.

User Response

Resubmit the command with the additional parameter.

  

IWNC1204E

{0} The action chsess will not be executed due to user refusal. No options have been modified for session SESSION_NAME.

Explanation

The No option was selected when asked if this command should proceed. No changes were make to the system.

User Response

None

  

IWNC1205W

{0} Using this option allows the FlashCopy target volume to be a Metro Mirror or Global Mirror primary volume. This can lead to data loss on both the primary and secondary volumes in the remote copy pair. Are you sure you want to use this option?

Explanation

None

User Response

None

  

IWNC1206E

{0} Invalid site number INTEGER for session SESSION_NAME.

Explanation

The site number specified in the command is invalid.

User Response

Resubmit the command with a valid site number.

  

IWNC1207E

{0} Invalid combination of options: Manage H1-H2 with HyperSwap and Manage H1-H2 with Open HyperSwap cannot both be specified at once.

Explanation

The combination of options specified in the command is not valid.

User Response

Resubmit the command with valid options.

  

IWNC1208E

{0} The PARAMETER_NAME option is not valid because the -manageH1H2WithHyperSwap option is not enabled.

Explanation

The PARAMETER_NAME option is not valid if the session is not managed by HyperSwap.

User Response

No action is required.

  

IWNC1209E

{0} May not specify the option "disableOHS" while Manage H1-H2 with Open HyperSwap is not enabled.

Explanation

The disableOHS option cannot be used if the session is not currently being managed by Open HyperSwap.

User Response

None

  

IWNC1210E

{0} Invalid schedule value of SCHEDULE_VALUE.

Explanation

An invalid schedule was specified.

User Response

Resubmit the command with a valid schedule.

  

IWNC1211E

{0} Invalid z/OS association specified.

Explanation

A system or sysplex is required for z/OS session association.

User Response

Resubmit the command with a valid system or sysplex.

  

IWNC1212E

{0} The system or sysplex that was provided does not exist.

Explanation

An existing system or sysplex is required for z/OS session association.

User Response

Verify that all host connections are in the Connected state and resubmit the command with a valid system or sysplex.

  

IWNC1213E

{0} A system or sysplex association is required for hardened freeze and HyperSwap management.

Explanation

A system or sysplex association is required for sessions that have enabled hardened freeze or HyperSwap management.

User Response

Select an existing system or sysplex, or disable hardened freeze and HyperSwap management.

  

IWNC1214E

{0} The OPTION_NAME option failed because session SESSION_NAME is in an active state.

Explanation

The OPTION_NAME option can be issued only if the session is in an inactive state.

User Response

Change the session into an inactive state and run the command again.

  

IWNC1215E

{0} The number of sites is incorrect. The number of sites that is expected is EXPECTED_NUM_SITES, but ACTUAL_NUM_SITES sites were provided.

Explanation

The PriorityHS option requires EXPECTED_NUM_SITES sites that are delimited by , or ;.

User Response

Specify the correct number of sites and issue the command again.

  

IWNC1216E

{0} A duplicate site name SITE_NAME was provided for the SESSION_NAME session. Each site name must be unique.

Explanation

The site name is a duplicate.

User Response

Specify the correct site name and issue the command again.

  

IWNC1217E

{0} The option PARAMETER_NAME is not valid because the -manageH1H2WithHyperSwap, -manageH1H3WithHyperSwap, or -manageH2H3WithHyperSwap option is not enabled.

Explanation

The disableHS option cannot be used if the session is not currently being managed by HyperSwap.

User Response

None.

  

IWNC1218E

{0} Invalid combination of options: Manage H1-H2 with HyperSwap or Manage H2-H3 with HyperSwap or Manage H1-H3 with HyperSwap and Enable Hardened Freeze cannot be specified at once.

Explanation

The combination of options specified in the command is not valid.

User Response

Resubmit the command with valid options.

  

IWNC1219E

{0} The value, VALUE, for -enableAutoRestart is currently not valid for session SESSION_NAME. This value can only be specified when both source and target storage servers are using a Network Time Protocol (NTP) to sync their clocks.

Explanation

The value, Yes, for -enableAutoRestart is only valid when all storage servers involved in the session are using the same Network Time Protocol IP address to sync their clocks.

User Response

Ensure all storage servers have their clocks synced by using an NTP IP address. After the changes have been made to the storage systems, refresh the storage configuration on the copy services management server using CLI command, refreshdevice. Resubmit the original command.

  

IWNC1220E

{0}VALUE No parameters provided or parameter values are empty.

Explanation

The command requires at least one parameter to modify the session. If a parameter is used and it requires a value, providing an empty value such as ' ' results in the same error.

User Response

Ensure a parameter is used to modify a session. If a parameter is used and a value is specified, ensure it is not a empty value.

  

IWNC1221E

{0}timestamp The -name parameter cannot be specified with any other parameters.

Explanation

The command requires the -name parameter to be specified with no other parameters. It is mutually exclusive with all other parameters for this command.

User Response

Ensure when the -name parameter is specified, no other parameter is specified.

  

IWNC1301W

{0} No commands were returned for session SESSION_NAME.

Explanation

Currently there are no valid commands that can be issued to this session. This could be due to the session containing no copy sets.

User Response

Adding copy sets to the session may remedy this condition.

  

IWNC1302E

{0} The action ACTION_NAME is not currently valid for this session; valid actions are: ACTIONS.

Explanation

An action was specified for this session that is currently not valid. The valid actions depend on the current state of the session.

User Response

Resubmit the command with a valid action.

  

IWNC1303W

{0} The action ACTION_NAME will not be executed due to user refusal.

Explanation

When prompted the No option was selected and the command was aborted. No actions were sent to the session.

User Response

None.

  

IWNC1304W

{0} Aborting because the command cannot be executed.

Explanation

When this command was submitted, it was inadvisable to execute the command.

User Response

Resolve any issues and resubmit the command.

  

IWNC1305E

{0} The action ACTION_NAME requires the parameter PARAMETER_NAME.

Explanation

The action specified requires an additional parameter.

User Response

Resubmit the command with the additional parameter.

  

IWNC1306E

{0} The parameter PARAMETER_NAME is not valid with the action ACTION_NAME.

Explanation

An additional parameter was specified that was not needed for the action.

User Response

Resubmit the command without the additional parameter.

  

IWNC1307W

{0}timestamp The action {1}action_name must have a retention greater than 0.

Explanation

Retention must be greater than 0.

User Response

Change retention to greater than 0.

  

IWNC1350E

{0} The action ACTION_NAME is not valid for this session.

Explanation

The action specified cannot be run against this session.

User Response

Resubmit the command with a valid action.

  

IWNC1351W

{0} The action ACTION_NAME has been canceled.

Explanation

None

User Response

None

  

IWNC1352W

{0} The command cannot be run.

Explanation

When this command was submitted, it was inadvisable to execute the command.

User Response

Resolve any issues and resubmit the command.

  

IWNC1353W

{0} The deletion priority PRIORITY_VALUE is not valid. The deletion priority must be an integer from 1 - 4.

Explanation

The deletion priority must be a number 1 through 4.

User Response

Resubmit the command with a valid deletion priority.

  

IWNC1354E

{0} The action ACTION_NAME requires the parameter PARAMETER_NAME.

Explanation

The action specified requires an additional parameter.

User Response

The action specified requires an additional parameter.

  

IWNC1355E

{0} The parameter PARAMETER_VALUE is not valid with the action ACTION_VALUE.

Explanation

An additional parameter was specified that was not needed for the action.

User Response

Resubmit the command without the additional parameter.

  

IWNC1601W

{0} The source device cannot be found.

Explanation

The source device specified in this command cannot be found.

User Response

Ensure that the device is specified correctly and that it is attached.

  

IWNC1602W

{0} The target device cannot be found.

Explanation

The target device specified in this command may be specified incorrectly or it may not be attached.

User Response

Ensure that the device is specified correctly and that it is attached.

  

IWNC1603W

{0} No device LSS entities were found.

Explanation

No LSSs were found for this device.

User Response

Ensure that the device was specified correctly and that it is attached.

  

IWNC1605W

{0} No paths between LSSs were found.

Explanation

There are no paths between the LSSs specified.

User Response

Configure the paths between the LSSs.

  

IWNC1701W

{0} No copy sets were returned for session SESSION_NAME.

Explanation

This session contains no copy sets.

User Response

Add copy sets to the session.

  

IWNC1702W

{0} No matching copy set role was found.

Explanation

No copy sets matched the specified parameters.

User Response

None

  

IWNC1750W

{0} No backups were returned for the role {1}ROLE in session {2}SESSION_NAME.

Explanation

The role for this session does not contain backups.

User Response

Create backups for the session and role.

  

IWNC1751W

{0}timestamp No tasks were returned for the server.

Explanation

No scheduled tasks have been created on the server that this user has authority for.

User Response

Create scheduled tasks and reissue the command.

  

IWNC1752W

{0} No requests were returned for the user.

Explanation

There are no Dual Control requests created by the current user or awaiting approval for the current user.

  

IWNC1753W

{0} No recovered backups were returned for session {1}session_name.

Explanation

The session had no recovered backups.

User Response

Issue the Recover Backup command to the session and reissue the query.

  

IWNC1754W

{0} No thin clones were returned for session {1}session_name.

Explanation

The session had no thin clones.

User Response

Issue the Thin Clone Snapshot command to the session and reissue the query.

  

IWNC1755W

{0} No thin clones were returned for session {1}session_name.

Explanation

The session had no thin clones.

User Response

Issue the Thin Clone Snapshot command to the session and reissue the query.

  

IWNC1765W

{0} No snapshots were returned for the role {1}role in session {1}session_name.

Explanation

The role for this session does not contain snapshots.

User Response

Create snapshots for the session and role.

  

IWNC1766W

{0} No snapshots were returned for the role {1}role in session {1}session_name.

Explanation

The role for this session does not contain snapshots.

User Response

Create snapshots for the session and role.

  

IWNC1772W

{0} No snapshots were returned for the role {1}role in session {1}session_name.

Explanation

The role for this session does not contain snapshots.

User Response

Create snapshots for the session and role.

  

IWNC1801W

{0} No copy set rules were found on the server.

Explanation

This system currently has no session types configured.

User Response

Ensure that the system is installed correctly.

  

IWNC1802W

{0}timestamp No other parameters are allowed to be specified with the -clone parameter.

Explanation

When the -clone parameter is specified, no other parameters are allowed.

User Response

Reissue the command specifying only the -clone parameter.

  

IWNC1803E

{0}timestamp If cptype is snapsvc then volume group must be set to true.

Explanation

This command with a snapshotsvc copy type requires volume group set to true.

User Response

Resubmit the command with the correct parameters.

  

IWNC1804E

{0}timestamp If -volumeGroup is set to true, the cptype must be snapsvc.

Explanation

This command with a volume group set to true must have a snapshotsvc copy type.

User Response

Resubmit the command with the correct parameters.

  

IWNC2101W

{0} No LSSs matched the input criteria.

Explanation

None

User Response

None

  

IWNC2201E

{0} Exactly one of the two parameters, -rolepair or -cpset, must be specified.

Explanation

This command requires either the rolepair or cpset parameter be specified but not both.

User Response

Resubmit the command with the correct parameters.

  

IWNC2202W

{0} No pairs were found.

Explanation

None

User Response

None

  

IWNC2203W

{0} No role pair was found.

Explanation

None

User Response

None

  

IWNC2204W

{0}timestamp No pair matched the input criteria.

Explanation

None

User Response

None

  

IWNC2205W

{0}timestamp No pairs were found.

Explanation

None

User Response

None

  

IWNC2206W

{0}timestamp No pairs were found.

Explanation

None.

User Response

No action is required.

  

IWNC2250W

{0} No pools were found.

Explanation

None

User Response

None

  

IWNC2251E

{0} Invalid device id specified: DEVICE_ID. Device ID must be an IBM XIV device ID.

Explanation

The device identifier specified is invalid. It must match the required format.

User Response

Resubmit the command with a valid device identifier.

  

IWNC2301W

{0} No path is defined on the source device.

Explanation

The source device does not contain a path.

User Response

Set up a path on the source device.

  

IWNC2302W

{0} No path matched the input criteria.

Explanation

No path matched the parameters specified.

User Response

None

  

IWNC2401W

{0} No roles matched the input criteria.

Explanation

None

User Response

None

  

IWNC2402E

{0} Unable to return the requested information for session SESSION_NAME because the information is not applicable for session type Snapshot.

Explanation

This command does not apply to a snapshot session. No information can be displayed.

User Response

This command is not valid for snapshot sessions.

  

IWNC2501W

{0} No rules were returned for session SESSION_NAME.

Explanation

None

User Response

None

  

IWNC2502W

{0} No roles were returned for session SESSION_NAME.

Explanation

None

User Response

None

  

IWNC2601W

{0} No commands were returned for the given session list.

Explanation

None

User Response

None

  

IWNC2602W

{0} No actions matched the input criteria.

Explanation

None

User Response

None

  

IWNC2701W

{0} No options were returned for session SESSION_NAME.

Explanation

None

User Response

None

  

IWNC2702W

{0} No flags were returned for session SESSION_NAME.

Explanation

None

User Response

None

  

IWNC2801W

{0} No matching session was found.

Explanation

None

User Response

None

  

IWNC2802W

{0} No session matched the input criteria.

Explanation

None

User Response

None

  

IWNC2901W

{0} No volume matched the input criteria.

Explanation

None

User Response

None

  

IWNC2903E

{0} Both protected and unprotected parameters were specified; only one should be.

Explanation

This command cannot accept both parameters at the same time.

User Response

Resubmit the command with the correct parameters.

  

IWNC3001W

{0} No sessions were found.

Explanation

None

User Response

None

  

IWNC3002E

{0} The session name SESSION_NAME is not valid.

Explanation

None

User Response

None

  

IWNC3003W

{0} No rules were returned for SESSION_NAME.

Explanation

None

User Response

None

  

IWNC3004W

{0} No roles were returned for SESSION_NAME.

Explanation

None

User Response

None

  

IWNC3005E

{0} The volume for -ROLE_NAME was not specified; it is required for this session type.

Explanation

This session type requires that a volume be specified for role ROLE_NAME.

User Response

Resubmit the command with the correct roles specified.

  

IWNC3006E

{0} This copyset does not allow a volume to be specified for the role ROLE_NAME.

Explanation

This session type cannot have a volume at the ROLE_NAME role.

User Response

Remove the extra volume and resubmit the command.

  

IWNC3009W

{0} Adding copy sets was aborted due to user refusal.

Explanation

The No option was selected when prompted. No action was taken.

User Response

None

  

IWNC3010E

{0} Adding copy sets was aborted due to errors.

Explanation

When attempting to match up the copy sets specified in the command, there were incompatible matches.

User Response

Ensure that the correct volumes were specified in the command.

  

IWNC3011E

{0}timestamp A volume group must be specified for this session type.

Explanation

For SVC Safeguarded Copy sessions, individual copy sets cannot be added. Instead, a volume group must be specified.

User Response

Ensure that the volume group parameter is specified on the command.

  

IWNC3012E

{0}timestamp Unable to run the requested command for session {0}session_name

Explanation

Copy set cannot be added or removed from Spectrum Virtualize Backup or Snapshot session types. These sessions are associated with entire volume groups.

User Response

If a volume needs to be added or removed from the session, add or remove the volume from the volume group on the storage device.

  

IWNC3301E

{0} Invalid copy type COPY_TYPE was specified. Valid copy types are: COPY_TYPES.

Explanation

The copy type specified is not supported.

User Response

Resubmit the command with a valid copy type.

  

IWNC3501W

{0} No storage systems were returned for device DEVICE_ID.

Explanation

There are no storage systems matching the identification specified.

User Response

Resubmit the command with an existing storage system identifier.

  

IWNC3502W

{0} DEVICE_NAME is a management console. To remove management consoles, use the rmmc command.

Explanation

DEVICE_NAME is a management console. To remove management consoles, use the rmmc command.

User Response

Use the rmmc command to perform remove a management console.

  

IWNC3503W

{0} The device DEVICE_NAME is only connected through a management console. To remove this device, the entire management console must be removed using the rmmc command.

Explanation

The device specified is only connected though a management console and must be removed using the rmmc command.

User Response

Use the rmmc command to remove this device.

  

IWNC3504W

{0} Found INTEGER devices with the same device ID DEVICE_ID. Please include an IP address in order to remove one of these devices.

Explanation

The device DEVICE_ID has multiple connections and in order to remove a single connection an IP address is required.

User Response

Provide the IP address as part of the command.

  

IWNC3505W

{0} The device DEVICE_NAME is not connected using the IP address IP_ADDRESS.

Explanation

This storage device is not connected via the specified IP address.

User Response

Check the specified address and resubmit the command.

  

IWNC3506E

{0} The action rmdevice will not be executed due to user refusal. No storage systems have been removed.

Explanation

None

User Response

None

  

IWNC3507E

{0} No tasks were run due to user refusal.

Explanation

None

User Response

None

  

IWNC3508E

{0}timestamp No tasks were run as the task specified is not found.

Explanation

None

User Response

None

  

IWNC3509E

{0}timestamp No events were approved or rejected because the action was canceled by the user.

Explanation

None.

User Response

No action is required.

  

IWNC3510E

{0}timestamp The task could not be run because attime is not in the correct format.

Explanation

None

User Response

None

  

IWNC3511E

{0}timestamp No tasks were removed as the task specified is not found.

Explanation

None

User Response

None

  

IWNC4001W

{0} No copy sets were found for SESSION_NAME.

Explanation

None

User Response

None

  

IWNC4002W

{0} No matching copy set was found.

Explanation

None

User Response

None

  

IWNC4003W

{0} No copy set rules were found.

Explanation

None

User Response

None

  

IWNC4004W

{0} No copy set roles were found.

Explanation

None

User Response

None

  

IWNC4005E

{0} There is a mismatch between the number of roles INTEGER and volumes INTEGER; they should be equal.

Explanation

There was a mismatch between the number of roles and volumes specified in the command.

User Response

Resubmit the command with the correct parameters.

  

IWNC4103I

{0} The showdevice command completed successfully.

Explanation

None

User Response

None

  

IWNC4201W

{0} No servers were found for DEVICE_ID.

Explanation

None

User Response

None

  

IWNC4202W

{0} ID DEVICE_ID is not a management console ID, if this is a storage device please use showdevice to view information pertaining to the device.

Explanation

None

User Response

None

  

IWNC4203I

{0} The showmc command completed successfully.

Explanation

None

User Response

None

  

IWNC4301W

{0} No copy rules were returned for session SESSION_NAME.

Explanation

None

User Response

None

  

IWNC4302W

{0} No sequences were returned for session SESSION_NAME.

Explanation

None

User Response

None

  

IWNC4401E

{0} Port PORT is invalid; it should be numeric.

Explanation

The port specified in the command is invalid.

User Response

Resubmit the command with a valid port.

  

IWNC4402E

{0} Port PORT is out of range; it should be greater than 0 and less than 65536.

Explanation

The port specified in the command is invalid.

User Response

Resubmit the command with a valid port.

  

IWNC4501W

{0} No SNMP managers were found.

Explanation

None

User Response

None

  

IWNC4702W

{0} The HA server SERVER was not found.

Explanation

None

User Response

None

  

IWNC4801E

{0} Invalid parameter PARM.

Explanation

An invalid parameter was specified as part of this command.

User Response

Resubmit the command with a valid parameter.

  

IWNC4802E

{0} No value was passed with the heartbeat parameter.

Explanation

To change the heartbeat setting, a value of on or off is required.

User Response

Resubmit the command with an appropriate value.

  

IWNC4803E

{0} An invalid parameter was passed with the heartbeat command.

Explanation

To change the heartbeat setting, a value of on or off is required.

User Response

Correct the host name and run the command again.

  

IWNC4805E

{0} Invalid combination of parameters. PARM is incompatible with OPTIONS.

Explanation

The set of parameters and values specified is invalid.

User Response

Resubmit the command with appropriate parameters and values.

  

IWNC5001E

{0} No locations were found.

Explanation

None

User Response

None

  

IWNC6001E

{0} No authorized users or groups were found.

Explanation

None

User Response

None

  

IWNC6002E

{0} An unknown user role type was encountered.

Explanation

None

User Response

None

  

IWNC6202E

{0} Invalid authlevel entered. Enter "admin", "monitor", or "operator".

Explanation

None

User Response

None

  

IWNC6301E

{0} Invalid type entered. Enter user or group as the type.

Explanation

None

User Response

None

  

IWNC6302E

{0} Invalid authlevel entered. Enter admin, monitor, or operator.

Explanation

None

User Response

None

  

IWNC6303E

{0} Authorization cannot be removed from the user USER_NAME in the role of USER_ROLE through the mkauth command.

Explanation

The mkauth command is not designed for user authorizations removal.

User Response

To remove user authorizations, submit the chauth command.

  

IWNC6501E

{0} An error occurred when exporting copy sets from session SESSION_NAME to file FILE_NAME.

Explanation

When exporting the copy sets to a file, an error was encountered.

User Response

Check that the file name specified is valid and that there is disk space available.

  

IWNC6502E

{0} An error occurred when exporting copy sets from session SESSION_NAME to file FILE_NAME. Please confirm that the specified path exists.

Explanation

When exporting the copy sets to a file, an error was encountered. It is likely caused because the path specified in the command does not exist.

User Response

Check that the specified path exists.

  

IWNC6504W

{0} The file specified by FILE_NAME already exists. Overwrite this file? [y/n]:

Explanation

None

User Response

None

  

IWNC6505I

{0} The file will not be over-writen due to user refusal.

Explanation

None

User Response

None

  

IWNC6506I

{0} The export copy set command for session SESSION_NAME succeeded. The file was exported to the path: FILE_NAME.

Explanation

None

User Response

None

  

IWNC6507E

{0} The export copy set command for session SESSION_NAME failed. The session does not have any copysets.

Explanation

None

User Response

None

  

IWNC6601E

{0} An error occurred when importing copy sets from file FILE_NAME into session SESSION_NAME.

Explanation

There was an error reading the file.

User Response

Ensure that the file is a valid CSV copy set file.

  

IWNC6602E

{0} A "file not found" exception occurred when importing copy sets from file FILE_NAME to session SESSION_NAME.

Explanation

The file specified in the command does not exist.

User Response

Resubmit the command with a valid file name.

  

IWNC6604E

{0} There are no valid or unique copy sets in file FILE_NAME that could be imported into session SESSION_NAME.

Explanation

The file specified does not contain valid copy sets or the copy sets already exist in the session.

User Response

Check the file to see if it has valid copy sets.

  

IWNC6605E

{0} An invalid action ACTION was specified for session SESSION_NAME.

Explanation

The action specified is not valid for this command. Only an add or remove action is allowed.

User Response

Ensure that only one of the two valid action parameters is specified.

  

IWNC6606E

{0} The force and keeponhw options are not valid when action is set to add.

Explanation

The force and keeponhw options are not valid when adding copy sets.

User Response

Only use the force or keeponhw options when the action is remove.

  

IWNC6607E

{0}timestamp The importcsv command was halted by the user for file {0}file_name.

Explanation

The importcsv file was halted by the user.

User Response

No action is required.

  

IWNC6701E

{0} The devtype DEVTYPE_VALUE is not supported through a Management Console connection.

Explanation

This device type is not supported for the management console specified.

User Response

Resubmit the command with a valid device type.

  

IWNC6804E

{0} The device DEVICE_ID does not match the IP address IP_ADDRESS.

Explanation

The address specified for this device does not match the specified IP address.

User Response

Resubmit the command with the correct values.

  

IWNC6901E

{0} DEVICE_ID is not a supported management console.

Explanation

None

User Response

None

  

IWNC6902W

{0} No servers were returned for management console DEVICE_ID.

Explanation

None

User Response

None

  

IWNC7101I

{0} No z/OS Storage Systems are available to be added to the copy services management server.

Explanation

None

User Response

None

  

IWNC7401I

{0} There is no participating Global Mirror sequence for session SESSION_NAME.

Explanation

The session currently does not have an active Global Mirror sequence. Thus, there are no Global Mirror details for this session.

User Response

Use this command when there is an active Global Mirror sequence.

  

IWNC7402I

{0} No Sequence Specifics were found for the Global Mirror Sequence of session SESSION_NAME.

Explanation

None

User Response

None

  

IWNC7403I

{0} The showgmdetails command failed due to a code page conversion problem.

Explanation

The data for the Global Mirror details are in an EBCDIC format and the Java Virtual Machine being used to run the replication server does not support EBCDIC encoding.

User Response

Use a Java Virtual Machine that is capable of decoding an EBCDIC code page.

  

IWNC7406I

{0} No Global Mirror sessions were found on the hardware which matched the session number GM_SESSION_NUMBER.

Explanation

None

User Response

None

  

IWNC7501I

{0} No hosts found.

Explanation

None

User Response

None

  

IWNC7502W

{0} A host exists with no address.

Explanation

The host exists but the IP address is not set.

User Response

Set the IP address of the host.

  

IWNC7651E

{0} Connection not found to host IP_ADDRESS. Either there is no host with that address, or there are multiple hosts with that address, and the specified port did not match with either host.

Explanation

None

User Response

None

  

IWNC7750E

{0} Invalid session specified. Session SESSION_NAME is session type SESSION_TYPE. Expected session type SESSION_TYPE.

Explanation

The session specified is the wrong type. It does not support snapshots.

User Response

Use this command on a valid snapshot session.

  

IWNC7751W

{0} No snapshot groups found for session SESSION_NAME.

Explanation

None

User Response

None

  

IWNC7760W

{0} No snapshots found for snapshot group GROUP_NAME in session SESSION_NAME.

Explanation

None

User Response

None

  

IWNC7770E

{0} Invalid session type specified. Session SESSION_NAME is session type SESSION_TYPE. Expected session type SESSION_TYPE.

Explanation

This command only works with a session type that uses snapshot groups.

User Response

Resubmit the command with the correct type of session.

  

IWNC7771E

{0} Invalid snapshot group specified. Session SESSION_NAME does not have a snapshot group named GROUP_NAME.

Explanation

The session specified does not contain the snapshot group.

User Response

Resubmit the command with the correct parameters.

  

IWNC7781E

{0} Both of the two parameters, PARAMETER_NAME and PARAMETER_NAME, must be specified.

Explanation

This command requires the appropriate parameters as explained in the message.

User Response

Resubmit the command with the correct parameters.

  

IWNC7782I

{0}timestamp The CSV file is located at: {1}file_name.

Explanation

None.

User Response

No action is required.

  

IWNC8000I

{0} The showhost command completed successfully.

Explanation

None.

User Response

None.

  

IWNC8101E

{0} A null password is not allowed. User USER_NAME was not created.

Explanation

A blank password was entered.

User Response

Resubmit the command and ensure the password is not null.

  

IWNC8102E

{0} The passwords entered do not match. User USER_NAME was not created.

Explanation

The password and confirmation password entered do not match.

User Response

Resubmit the command and ensure that the confirmation password entered is the same as the original password entered.

  

IWNC8103E

{0} Invalid authlevel entered. Enter admin, monitor, or operator.

Explanation

The value specified for the authlevel parameter was incorrect.

User Response

Resubmit the command with a correct authlevel value as explained in the message.

  

IWNC8301E

{0} A null password is not allowed. The password for user USER_PASSWORD was not updated.

Explanation

A blank password was entered.

User Response

Resubmit the command and ensure the password is not null.

  

IWNC8302E

{0} The passwords entered do not match. The password for user USER_PASSWORD was not updated.

Explanation

The password and confirmation password entered do not match.

User Response

Resubmit the command and ensure that the confirmation password entered is the same as the original password entered.

  

IWNC8401E

{0} Invalid parameters entered. One of the two parameters, -cgname or -clearcgname, must be specified.

Explanation

This command requires either the cgname or clearcgname parameters but not both.

User Response

Resubmit the command with the correct parameters.

  

IWNC8402E

{0} The action setrolepaircg will not be executed due to user refusal. The user defined consistency group name has not been updated for session SESSION_NAME, role pair SEQUENCE_NAME.

Explanation

The No option was selected when asked whether this command should proceed. No changes were made to the system.

User Response

None.

  

IWNC8500E

{0} The server parameter SERVER is invalid or not formatted correctly. PORT is not a valid port number. It must be an integer value between 1 and 65535.

Explanation

The server parameter was not properly formatted. The parameter should be a valid hostname or IP address. If a port other than the default port is entered, it should be formatted hostname:port with the port an integer value between 1 and 65535. If the server address is an IPv6 address it should be formatted [ip_address]:port.

User Response

Resubmit the command, specifying a valid server and optional port number or none to use the default port.

  

IWNC8501E

{0} A null password is not allowed. The CONFIGURATION_TYPE configuration was not updated.

Explanation

A blank password was entered.

User Response

Resubmit the command and ensure that the password is not null.

  

IWNC8502E

{0} PORT_NUMBER is not a valid port number. It must be an integer value between 1 and 65535.

Explanation

The server parameter contained an invalid port number.

User Response

Resubmit the command, specifying a valid port number or none to use the default port.

  

IWNC8503E

{0} File FILE_PATH does not exist.

Explanation

The keyFilePath specified a file path that does not exist. The LDAP or Active Directory configuration was not updated.

User Response

Resubmit the command, specifying a valid path for the key file.

  

IWNC8504E

{0} An error occurred reading file FILE_NAME.

Explanation

An error occurred while trying to read the key file. The LDAP or Active Directory configuration was not updated.

User Response

Ensure that the file specified is closed and contains a valid certificate.

  

IWNC8505E

{0} No users could be found when verifying the specified configuration. As a result, the TYPE configuration was not updated.

Explanation

The specified configuration produced no results and as a result the authentication configuration was not updated. If users do exist on the authentication server then the configuration parameters may be incorrect or the server is unreachable at this time.

User Response

Ensure that all parameters are correct and submit the command again.

  

IWNC8506E

{0} The COMMAND_NAME command has been canceled.

Explanation

None.

User Response

None.

  

IWNC8600E

{0} The COMMAND_NAME command has canceled due to user refusal.

Explanation

None.

User Response

None.

  

IWNC8650E

{0}timestamp Aborting because sessions param can be used only for session type alerts.

Explanation

When this command was submitted, the session param was used when the alert type was not session.

User Response

Resolve any issues and resubmit the command.

  

IWNC8700E

{0}timestamp Port {1}port is invalid; it must be a numeric.

Explanation

The port that is specified in the command is invalid.

User Response

Resubmit the command with a valid port.

  

IWNC8710E

{0} The system file PORT is an unsupported or invalid system file for this command.

Explanation

The properties of the given file parameter are not supported by this command.

User Response

Verify that the file parameter is correct.