Operation
Important: All rear modules are part of the fire enclosure and must be removed when a
replacement can be immediately inserted.
Important: The enclosure does not receive sufficient airflow or cooling if it is
operated with any missing rear modules. Every module bay must be filled either with a module or a
blank module.
Replace any defective modules with fully operational units as soon as possible. Do not remove cooling modules, PSUs, or compute modules unless you have a replacement model of the correct type ready for insertion.
CAUTION:
To prevent overturning, drawer interlocks stop users from opening both drawers
at the same time. Do not attempt to force open a drawer when the other drawer in the enclosure is
already open. In a rack with more than one enclosure, do not open more than one drawer per rack at a
time.
CAUTION:
Operating temperatures inside the enclosure drawers can reach up to 60°C. Take
care opening drawers and removing drive carriers.
CAUTION:
Due to product acoustics, wear ear protection for any prolonged
exposure.
Before removing a module, disconnect all power cords and cables.
Do not use open drawers to support any other equipment.
